Coloured Sealant contractors in Maryton
Coloured and colour-matched sealant for visible joints across Maryton, by CSCS-carded applicators. CHAS accredited and fully insured.
- Hotel refurbishments with a set colour scheme
- Sealant that no longer suits recoated frames
- Coloured joints that have cracked with movement
Coloured sealant near Maryton
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our coloured sealant in Maryton
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints on sites in Maryton. When replacing old joints, the new colour usually has to match what’s already there, particularly where the building’s look matters. We work on office fit-out finishes, natural stone and brick and hotel bathrooms and public areas, and what we’re called in for most is smeared sealant on stone or joinery and old colour-matched joints lifting at the edges. A specialist sealant contractor works differently from a general builder: in Maryton, that means joint design, primers and backing rod as standard.
For a job around Maryton, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Indoor work isn’t held up by rain.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Location
- Maryton (DD8)
- Wider area
- Angus
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Our process
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building near Maryton, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photos of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Preparing the site
- Confirm the product named in the specification
- Point out any areas we must not close
- Let us know about inductions and permits
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Commercial premises in Maryton
The east of Scotland, where Maryton is, gets less rain than the west. Frost and condensation on winter mornings can still hold up external sealing. Two named trading, business or retail sites lie within about 3 miles of Maryton. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal, often in a colour the occupier specifies.
Occupiers with premises at both Logie Business Park and Muirhead Industrial Estate could have the sealant at each handled under one quote. Offices at parks like Logie Business Park (less than half a mile west of Maryton) have receptions, kitchens and glazed partitions where a tidy joint matters.
Maryton is about 4 miles west of Forfar, in Angus. We cover commercial sites throughout Maryton, whether it’s a single job or part of a planned programme. Across Angus, 65 places are covered, including Maryton. Dundee is covered too, around 13 miles from Maryton.
Postcode districts covered here: DD8 for colour-matched joints. Streets here include Mid Row, Forfar Road and Third Row. Sites close to Maryton are covered too, including Kirriemuir (1 mile north-west), Westmuir (2 miles west), Padanaram (2 miles south-east), Douglastown (4 miles south-east) and Glamis (4 miles south). Bigger towns within reach include Monifieth (14 miles south-east), Carnoustie (15 miles south-east), Brechin (13 miles east), Hunter's Town (15 miles south-east), Gardynebourg (15 miles south-east) and Letham (9 miles east).
Local landmarks in Maryton
In Maryton, that means premises near Roods Bar and the streets around them. A little further out are Kirriemuir Gateway to the Glens Museum (0.7 miles north-west) and Inverquharity Castle (3.1 miles north). Not far away are Loch of Kinnordy and Mile Hill.
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Agree the sealant colour early and write it into the specification
- Look at the cured colour before the full run
- Record the product and colour reference on the building file
- Ask contractors to check the colour before resealing
Expect some change in appearance over the years. That is normal for exposed sealant, and a reseal brings it back.
Settle the colour early in the project. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- The size and state of each joint
- Distance, for remote addresses
- The product specified
- Quantities, in metres or numbers
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
Good information means a firmer quote. When you get in touch, include:
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
- The product your specification calls for
- Photos of the joints, close up and from further back
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Restoring stained stone or masonry next to old sealant
- A colour that never alters with age
- Colour variation across natural stone or brick that no single shade can match
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we will tell you honestly.
Where we work in Maryton
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Natural stone and brick
- Office fit-out finishes
- Cladding panels
- Powder-coated and anodised frames
Questions about Maryton
Does your area include sites such as Logie Business Park, near Maryton?
Yes, sites like Logie Business Park are within our area, along with the rest of Maryton. A few photographs and the unit address let us price the work.
Will our hotel in Maryton need to close for the work?
Rarely, if ever. We take a few rooms out at a time. The plan is built around your bookings.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long does a job like this take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Can you quote from photos?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, and bigger or more complex jobs typically get a visit.
Do you use coloured sanitary silicone?
Yes, where the product range allows. Hotel bathrooms, washrooms and kitchens often use coloured sanitary silicone to suit tiles or stone.
Do you need coloured sealant in Maryton?
On some projects the colour was never agreed, or a substitute product was used. It seals fine but catches the eye, so someone asks for it to be changed.
Any of the following is a good reason to get the joints checked over:
- Stained or mouldy coloured joints in washrooms
- Shop fits that need consistent sealant colours across sites
- Discoloured joints on a visible elevation
- Joints that need to match a new RAL frame colour
Refits at hotels like Thrums Hotel (to the north-west of Maryton) bring joints at vanity tops, bars and reception desks that guests see every day.
Before you book anyone
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Which product they’ll use, and why it suits the joint
- Health and safety accreditation such as CHAS
- Whether their applicators hold CSCS cards
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.