The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Coloured and colour-matched sealant in Luncarty, Perth and Kinross

Coloured sealant in Luncarty, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.

  • Joints that need to match a new RAL frame colour
  • Discoloured joints on a visible elevation
  • Old colour-matched joints lifting at the edges
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS accredited
£5m public liability

Coloured sealant in Luncarty

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Work for main contractors and building owners

Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.

CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.

About our coloured sealant in Luncarty

In retail, hospitality and office fit-outs, joints are seen close up every day. A grey bead on a black shopfront or a white line against oak looks like a defect, even when the seal is sound. The aim is a colour from the product’s range that disappears into the surface. If you have previous reseals that don’t match the original and old sealant that has yellowed, darkened or faded, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, in Luncarty it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.

Travel to smaller places such as Luncarty is planned so the whole job is finished in one visit where possible, so it helps to have photos and a full list first. If neighbouring businesses have work too, the visits can be grouped.

The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.

Location
Luncarty (PH1)
Wider area
Perth and Kinross
Cover
12 months on every job
Quote
Fixed quote, scope in writing
Phone
01277 525 020
Last updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

What sets the cost

Before we quote, we look at:

  • Which sealant the job calls for
  • Quantities, in metres or numbers
  • The size and state of each joint
  • Induction, permit and paperwork requirements

The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.

What we need to price the job

Diagnosis starts before we arrive. Tell us:

  • Asbestos survey details if the building is older
  • Specification clauses that apply
  • The type of building and who uses it
  • Photos of the joints, close up and from further back

The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or ring 01277 525 020 or use the quote form to discuss it first.

Why it’s worth doing now in Luncarty

Resealing a full run gives a consistent colour. Small repairs at different times rarely match. For buildings near Luncarty, dealing with all the failing joints at once saves return trips. Send photos and we’ll quote for everything together.

Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.

Why us?

  • Coloured sealants to suit the setting, where available
  • Constructionline member for supplier checks
  • Old sealant cut out, never sealed over
  • Products installed to the manufacturer’s instructions

Read how commercial sealant jobs are priced or our accreditations.

FAQs: Luncarty

Is North Muirton Industrial Estate, near Luncarty, within your area?

Yes, sites like North Muirton Industrial Estate are within our area, along with the rest of Luncarty. Photos and a short description are enough for a first look.

Is Luncarty too small for you to travel to?

Not at all. Luncarty is within our area. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.

Are you insured?

Yes. Our insurance certificate can be sent alongside the quote.

Will you just go over the old sealant?

No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.

How long does a typical visit take?

We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.

What will the job cost?

That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we will price it properly.

Does coloured sealant change colour outdoors?

Some change is normal outdoors. UV and grime can soften or alter the colour.

Maintenance after handover

Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:

  • Approve a sample bead on high-profile areas
  • Reseal whole runs rather than patching single joints
  • Don’t let trades patch coloured joints with a random sealant
  • Agree the sealant colour early and write it into the specification

Clean coloured joints with mild, non-abrasive products. Harsh chemicals and scouring can change how the colour looks over time.

Ask for a trial bead on high-profile areas. A sample in real light shows how it will look.

Working on commercial sites near Luncarty

Being in the east of Scotland, Luncarty gets less rain than the west coast. Frost and condensation on winter mornings can still hold up external sealing. Outside work is booked with that in mind Less than 3 miles from Luncarty there are at least three named estates and business parks. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.

If you have premises on more than one site, say at North Muirton Industrial Estate and Inveralmond Industrial Estate, one contractor and one quote can cover both. For premises near Perth station (4.2 miles south of Luncarty), footfall is part of the plan: work is phased so shops and offices keep trading. Trade counters and showrooms on estates such as North Muirton Industrial Estate (to the south of Luncarty) need neat joints where customers see them.

Luncarty is about 4 miles north of Perth, in Perth and Kinross. Luncarty sits inside our coverage and the rest of Perth and Kinross, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 114 places in Perth and Kinross. Sites around Dundee have their own page, roughly 19 miles from Luncarty.

We take on colour-matched joints across the PH1 postcode area. Streets here include Marshall Road, Marshall Place and Marshall Gardens. Nearby places we also cover include Stormontfield (1 mile east), Stanley (2 miles north), Tulloch (3 miles south), Guildtown (3 miles north-east) and West Tofts (3 miles north) for colour-matched joints. Bigger towns within reach include Perth (4 miles south), Blairgowrie and Rattray (11 miles north-east), Crieff (15 miles west), Auchterarder (14 miles south-west), Letham (3 miles south) and Scone (3 miles south-east).

Local landmarks in Luncarty

The nearest railway station is Perth station, roughly 4.2 miles south. Other landmarks nearby include Scone Palace (2.2 miles south-east) and Murray Royal Hospital (4 miles south-east).

Map of Luncarty © OpenStreetMap contributors

From enquiry to sign-off

Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Travel to smaller Scottish places like Luncarty is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.

  1. We start with photographs, drawings or a visit to see the finishes.
  2. Colour options from the specified product’s range are shared with you.
  3. Tell us your site hours and access windows and we will plan around them.
  4. Joints are prepared, primed where specified and backed.
  5. We seal in the approved colour and tool it smooth.

Preparing the site

  • Clear stock, furniture or equipment away from the joints
  • Share the asbestos register for older buildings
  • Tell staff and tenants when we will be in

Quotes

Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or send details through our quote form.

Ask for a quote

Related advice

When it isn’t the sealant

Before quoting, we check that sealant is the right answer. It isn’t the answer for:

  • A colour that never alters with age
  • Paintable products in joints they aren’t suited to
  • Cleaning or repairing the surrounding finishes

If in doubt, call 01277 525 020 or send details through our quote form and we will say what we think.

Joints and surfaces we work on

  • Shop-fit joinery and counters
  • Cladding panels
  • Office fit-out finishes
  • Natural stone and brick
  • Powder-coated and anodised frames
  • Hotel bathrooms and public areas
Accreditations

Trusted. Accredited. Insured.