The Mastic Doctor team standing beside their branded vans outside an office building
Aberdeenshire · Scotland

Lumsden coloured sealant

Looking for coloured sealant in Lumsden? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Standard-colour sealant spoiling a high-end finish
  • A run of joints in mismatched shades
  • Joints that need to match a new RAL frame colour
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
Constructionline member
£5m public liability

Need coloured sealant in Lumsden?

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Your questions answered

Do you offer colour-matched sealant for buildings in Lumsden?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photographs and we’ll confirm what’s available for the product.

Is Lumsden too small for you to travel to?

Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.

Can you quote from photographs?

Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.

How do you choose the sealant?

Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

Do your applicators hold CSCS cards?

Yes. Our applicators hold CSCS cards, as many construction sites ask for.

Will you just go over the old sealant?

No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.

Can you send site paperwork?

Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.

Coloured sealant for commercial buildings in Lumsden

Natural materials vary across a single elevation: sandstone, granite, brick and stained timber rarely have one flat colour. The aim is a sealant colour that sits comfortably against the whole surface, agreed on site where needed. The enquiries we see most involve smeared sealant on stone or joinery and standard-colour sealant spoiling a high-end finish, across powder-coated and anodised frames, office fit-out finishes and hotel bathrooms and public areas. For commercial sealant work in Lumsden, you deal with one contact from quote to sign-off, whether it’s one building or several.

For a job around Lumsden, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.

Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.

Place
Lumsden (AB54)
Region
Aberdeenshire
Guarantee
12 months on every job
Quotes
Fixed quote, scope in writing
Telephone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

When it isn’t the sealant

Before quoting, we check that sealant is the right answer. It won’t put right:

  • Colour variation across natural stone or brick that no single shade can match
  • Stopping sealant from ever changing colour outdoors
  • Restoring stained stone or masonry next to old sealant

If you are not sure, just give us a call on 01277 525 020 or email the details over and we will give you a straight answer before you book.

What we seal

  • Natural stone and brick
  • Powder-coated and anodised frames
  • Shop-fit joinery and counters
  • Office fit-out finishes
  • Hotel bathrooms and public areas
  • Cladding panels

Why it’s worth doing now in Lumsden

It’s far cheaper to approve a sample than to strip and redo a full run. A sample takes little time against redoing a whole elevation. For buildings near Lumsden, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.

The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.

Why us?

  • Standard and matched colours in many product ranges
  • Fully insured, including public liability cover
  • Clear, fixed quotes
  • Our applicators hold CSCS cards

Take a look at how commercial sealant jobs are priced or our accreditations and insurance.

Common problems we fix in Lumsden

On some projects the colour was never agreed. It seals fine but catches the eye, so someone asks for it to be changed.

Any of the following is a good reason to get the joints checked over:

  • Discoloured joints on a visible elevation
  • Untidy coloured beads with ragged edges
  • A run of joints in mismatched shades
  • Coloured joints that have cracked with movement

Where a joint is on show in Lumsden, we will check which shades the product offers before work starts.

Comparing quotes

  • Whether their applicators hold CSCS cards
  • The named product and why it was chosen
  • Is depth set with backing rod, or bond-breaker tape in shallow joints?
  • Whether primer will be used where the manufacturer specifies it

Questions to ask before you appoint anyone

Diagnose, treat, sign off

Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For a building near Lumsden, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.

  1. First we agree which sealant type the joint needs.
  2. We compare the target colour with the colours available.
  3. The nearest colour is agreed, with a sample bead where needed.
  4. We cut out the existing bead, clean and set the depth.
  5. Edges are masked and the coloured sealant applied and tooled.
  6. Masking comes off and the work is checked with you.

What we need from you

  • Flag any permit to work we will need
  • Let building users know which areas are affected
  • Send asbestos survey details if the building is pre-2000

Quotes

Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email drawings and photos.

Ask for a quote

Read more

After the work

Problems stay small when the joints are checked regularly. Specifically:

  • Record the product and colour reference on the building file
  • Approve a sample bead on high-profile areas
  • Plan full-run reseals on visible elevations
  • Put the colour reference on the finishes schedule

Colours can soften with light and weathering. That is normal for exposed sealant, and resealing restores the look when the time comes.

Settle the colour early in the project. When colour is left to the last minute, it is often wrong; fixing it early prevents rework.

What sets the cost

Before we quote, we look at:

  • Access and working height
  • The total length or number of joints
  • Whether the work must be split into stages
  • How much existing material needs removing

Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.

Details that help us quote

Diagnosis starts before we arrive. Let us know:

  • Drawings or a marked-up plan, if available
  • What the building is and how it’s used
  • Any specification or named product
  • Anything awkward about access or site hours

Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Coloured sealant around Lumsden: what changes locally

Lumsden is in the east of Scotland, which is drier than the west. Cold snaps still affect when external joints can be sealed.

For any commercial premises in Lumsden, a lasting joint depends on full removal of the old sealant and clean, dry faces.

Lumsden is about 18 miles west of Inverurie, in Aberdeenshire. Anywhere in AB54, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. We also cover Aberdeen, around 30 miles from Lumsden.

If you need coloured sealant in AB54, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include The Square and Main Street. Nearby places we also cover include Cottown (3 miles north-east), Rhynie (4 miles north-east), Tullynessle (5 miles east), Towie (6 miles south) and Bridge of Alford (6 miles south-east). Bigger towns within reach include Huntly (12 miles north), Aboyne (15 miles south), Alford (7 miles south-east) and Insch (10 miles east). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.

Near you in Lumsden

Nearby you’ll also find Brux Castle (3.3 miles south). For a walk, there’s The Buck.

Map of Lumsden © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.