Coloured and colour-matched sealant in Lordswood, Medway
Coloured and colour-matched sealant for visible joints across Lordswood, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Smeared sealant on stone or joinery
- Coloured joints that have cracked with movement
- Sealant that no longer suits recoated frames
Need coloured sealant in Lordswood?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Lordswood
Natural materials vary across a single elevation: a stone or brick facade shifts in tone from one area to the next. We choose a colour that reads well across the surface rather than chasing one spot. We work on hotel bathrooms and public areas, powder-coated and anodised frames and shop-fit joinery and counters, and the failures we are asked to look at most are standard-colour sealant spoiling a high-end finish and previous reseals that don’t match the original. Facilities teams, main contractors and managing agents in Lordswood tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Sealant jobs for businesses in a place the size of Lordswood are often best grouped: frontage, staff facilities and window perimeters on one booking. That keeps travel and disruption down.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Lordswood (ME5, ME7)
- Wider area
- Medway
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Coloured sealant around Lordswood: points for this area
Lordswood is in the South East, one of the UK’s drier regions. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. Lordswood is about 30 miles from central London. The commuter belt holds a great many offices, retail parks and business parks. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
Shops and cafés around stations like Chatham station (to the north of Lordswood) trade from early, so work is timed around them. Occupiers with premises at both Lordswood Industrial Estate and Hempstead Valley Shopping Centre could have the sealant at each handled under one quote.
Lordswood is about 2 miles south of Chatham, in Medway. Looking for coloured sealant in Lordswood? We can help, as we do across Medway. Across Medway, 54 places are covered, including Lordswood. For work in that direction, see our London page, about 30 miles away.
Work on colour-matched joints is covered throughout ME5 and ME7. If your site is on Hall Road, Rover Road and Gould Road or close by, send details and we will quote for colour-matched joints. Close to Lordswood, our area also takes in Lidsing (1 mile south-east), Walderslade (1 mile west), Dunn Street (1 mile south-east), Bredhurst (1 mile east) and Hempstead (2 miles north-east). Nearby towns on our patch include Gillingham (3 miles north-east), Rochester (4 miles north-west), Rainham (3 miles north-east), Strood (5 miles north-west), Twydall (3 miles north-east) and Hoo St Werburgh (6 miles north). Lordswood ranks among the main centres of Medway, with offices, shops, schools and other public and commercial buildings.
Local landmarks in Lordswood
Locally, jobs take us to sites close to Greenacre Academy, South Wood and The Harrow pub. For rail, the closest station is Chatham station, roughly 3.2 miles north. Nearby you’ll also find Pentagon Shopping Centre (3.4 miles north) and Medway Maritime Hospital (3 miles north). For a walk, there’s Burham Down and Boxley Hills.
Places near Lordswood
Also in Lordswood
Looking after the joints
After handover, these steps help:
- Use one colour standard across multi-site work
- Keep harsh solvents away from visible joints
- Keep the colour details for future repairs
- Don’t let trades patch coloured joints with a random sealant
Use gentle cleaning methods on coloured sealant. Harsh chemicals and scouring can change how the colour looks.
Ask for a trial bead on high-profile areas. Seeing the cured colour in place avoids surprises.
Our process
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. What matters most for a job in Lordswood is a clear list of what needs doing, so send photographs of each area. You’ll then get a fixed price for the work.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Tell us which areas need to stay in use
- Arrange parking or a loading space
- Tell staff and tenants when we will be in
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, ring 01277 525 020 or send photos by email.
Read more
Your questions answered
Is Lordswood too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Can you work at a site such as Lordswood Industrial Estate, by Lordswood?
Yes. Estates, retail parks and business parks around Lordswood, Lordswood Industrial Estate among them, are all within reach. A few photos and the unit address let us price the work.
Does coloured sealant change colour outdoors?
It can, to a degree. Exposure, product and colour all play a part, and we can’t promise a colour that never alters.
Do you do a sample bead?
Yes. Where colour is critical, we can agree a short sample bead in a discreet spot. Cured sealant can look slightly different from the wet bead, so seeing it in place helps.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
How the job changes by surface
Powder-coated and anodised frames
Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and you confirm the choice.
Natural stone
Natural stone rarely has one colour, and the sealant has to work with that. A stone-compatible, neutral-cure sealant avoids staining in a colour chosen from its range.
What sets the cost
These are the things that shape the price:
- Travel to remote or island sites
- The total length or number of joints
- How accessible the joints are
- Whether the work must be split into stages
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.
Sending details for a quote
A few photos plus some basic facts will normally do. It helps to include:
- The product your specification calls for
- The site address and postcode
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or email a schedule or drawings.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Signs you need coloured sealant in Lordswood
Older sealant changes colour over time. UV, grime and weathering alter how a bead looks after a few years, so joints that once matched no longer do. A reseal brings the colour back in line.
Most enquiries start with one or more of the following:
- Old colour-matched joints lifting at the edges
- Dirty, discoloured joints in public areas
- A run of joints in mismatched shades
- Old sealant that has yellowed, darkened or faded
A unit on an estate like Lordswood Industrial Estate (0.5 miles south of Lordswood) usually has an office front, a trade counter and staff facilities with joints of their own.
Before you book anyone
- Their pre-qualification and accreditations
- The terms of the workmanship guarantee
- How they’ll work around occupants
- Do they follow the manufacturer’s priming guidance?