Coloured and colour-matched sealant in Hunton, Kent
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Hunton and the surrounding area. Send photographs or drawings for a fixed quote.
- Discoloured joints on a visible elevation
- A bead that fights the cladding or frame colour
- Shop fits that need consistent sealant colours across sites
Need coloured sealant in Hunton?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Coloured sealant in Hunton, done properly
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints on sites in Hunton. On resealing, matching the existing colour is often as important as the seal itself. Site teams most often ask us about coloured joints that have cracked with movement and fit-outs with a sealant colour in the specification, across hotel bathrooms and public areas, powder-coated and anodised frames and office fit-out finishes. A specialist sealant contractor works differently from a general builder: on jobs in Hunton, preparation and product choice get the time they need.
A job in a smaller place like Hunton is typically a single building. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Hunton (ME15)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Hunton need work, visits can be combined. You will have a fixed quote before work starts.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Getting the site ready
- Move anything stored against the joints
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Related advice
Why deal with it now?
Matching new joints to the existing ones is easier when the whole run is done together. Piecemeal repairs over several years tend to drift in colour. Around Hunton, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- Colour options checked against the specified product
- Specification-led, product-correct work
- Joints cleaned back to sound surfaces
- Constructionline member
Read what affects the cost and how we’re accredited.
Coloured sealant around Hunton: how the place shapes the job
At about 31 miles from central London, Hunton is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings. Hunton sits in one of the drier corners of the country, the South East. External joints still need dry faces and the right temperature, and damp or frosty mornings can hold work up.
For premises near Yalding station, which lies west of Hunton, footfall is part of the plan: work is phased so shops and offices keep trading. On estates like Woodfalls Industrial Estate (1.9 miles west of Hunton), the office and welfare end of each unit has its own sealant to maintain.
Hunton is about 4 miles south-west of Maidstone, in Kent. Any commercial site in Hunton is covered. Across Kent, 931 places are covered, including Hunton. There’s a separate page for London, roughly 31 miles from Hunton.
We take on colour-matched joints across the ME15 postcode area. Among the streets we cover are West Street, Bensted Close and Bishop's Lane, and sites on any of them can send details for a fixed quote. If your building is just outside Hunton, we cover Benover (1 mile west), Yalding (1 mile north-west), Congelow (1 mile west), Chainhurst (1 mile south-east) and Laddingford (2 miles west). Further afield, our area takes in Maidstone (4 miles north-east), Sittingbourne (15 miles north-east), Sevenoaks (13 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (15 miles north) and Tonbridge (8 miles west).
What’s near Hunton
Around Hunton, our work takes us to commercial buildings near Quarry Wood. The nearest railway station is Yalding station, about 2.1 miles west. Well-known places in the area include Teapot Island (1.8 miles west) and Oakwood Hospital (3.7 miles north).
Questions we are asked in Hunton
Can you work at a site such as Woodfalls Industrial Estate, by Hunton?
Yes. Our area takes in Hunton and its surroundings, with estates and business parks such as Woodfalls Industrial Estate included. A few photos and the unit address let us price the work.
Do you offer colour-matched sealant for buildings in Hunton?
Yes, we can normally get close to most finishes from the product’s colour range. Send colour references or photographs and we’ll confirm what’s available for the product.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
What do you charge?
Every job gets its own fixed quote. For yours, speak to us on 01277 525 020 or send photos by email.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Places near Hunton
What else we do in Hunton
Cost factors for colour-matched joints
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Distance, for remote addresses
- Joint width, depth and condition
- The total length or number of joints
- Any access equipment needed
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Drawings or a marked-up plan, if available
- Whether an asbestos survey exists
- The product your specification calls for
- What the building is and how it’s used
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
What we can’t put right
Some faults sit outside our scope, and we say so rather than covering them up:
- Materials with mixed tones that defy a single match
- Paint over sealant on joints that move too much
- Repairing damaged frames or cladding
If in doubt, phone 01277 525 020 or email us and we’ll say what we think before you book.
Surfaces we seal
- Powder-coated and anodised frames
- Cladding panels
- Natural stone and brick
- Hotel bathrooms and public areas
- Office fit-out finishes
- Shop-fit joinery and counters
What the job involves on each surface
Natural stone
Sandstone, limestone and granite each have distinct tones. Colour is agreed on site where possible.
Brick and masonry
Brickwork joints normally look best in a colour close to the mortar or brick. We choose a suitable shade from the product’s range for the elevation.