Benover coloured sealant
Coloured and colour-matched sealant for visible joints in Benover and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- Discoloured joints on a visible elevation
- Hotel refurbishments with a set colour scheme
- Smeared sealant on stone or joinery
Coloured sealant across Benover
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Benover
On a finished interior or a high-quality elevation, the sealant is part of the look. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, for clients in Benover. The right product for the joint always comes first, then the colour. We work on natural stone and brick, shop-fit joinery and counters and powder-coated and anodised frames, and what we are called in for most is standard-colour sealant spoiling a high-end finish and shop fits that need consistent sealant colours across sites. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Benover, that means joint design, primers and backing rod as standard.
Business units in the countryside around places like Benover are often converted barns, stables or farmyards. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Benover (ME18)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Our process
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For a building around Benover, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- Masking comes off and the work is checked with you.
Getting the site ready
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Send your site hours and access windows
Request a quote
To get a fixed quote, phone 01277 525 020 or send details through our quote form with the site address and an outline of the work. Our quote form is another easy route.
Advice
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Leave it or put it right?
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Fixing the colour reference at the start keeps every site the same across the programme. Halls, stores and units around places like Benover may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
A quote for colour-matched joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why choose Mastic Doctor in Benover
- Work to your specification and the manufacturer’s guidance
- Joints cleaned back to sound surfaces
- Public liability insurance in place
- Colours confirmed for the specified product
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Shops, offices and hotels in and around Benover
Benover is in the South East, one of the UK’s drier regions. External joints still need dry faces and the right temperature, and damp or frosty mornings can hold work up. Less than 3 miles from Benover there are two named estates and business parks. Sites like these see regular refits, with shopfronts, offices and staff areas to seal.
Offices and shops close to stations such as Yalding station (to the north-west of Benover) tend to be busy all day, so sealant work is planned around opening hours. If you have premises on more than one site, say at Woodfalls Industrial Estate and Forstal Business Park, one contractor and one quote can cover both.
Benover is about 5 miles south-west of Maidstone, in Kent. Businesses, contractors and managing agents in Benover use us for work on colour-matched joints. 931 places across Kent fall within our area, Benover among them. Our London page has more on work in that area.
We take on colour-matched joints across the ME18 postcode area, whatever the building. If your building is just outside Benover, we cover Congelow (1 mile north-west), Yalding (1 mile north), Laddingford (1 mile south-west), Hunton (1 mile east) and Nettlestead Green (2 miles north-west). Bigger towns within reach include Maidstone (5 miles north-east), Sevenoaks (12 miles north-west), Royal Tunbridge Wells (9 miles south-west), Gravesend (15 miles north), Tonbridge (7 miles west) and Kings Hill (4 miles north).
Around Benover
Recent enquiries here include premises near The Woolpack Inn and the streets around them. The closest station to Benover is Yalding station, roughly 1.3 miles north-west of the centre. Nearby you’ll also find Oakwood Hospital (4.4 miles north-east) and Teapot Island (0.9 miles north-west).
FAQs: Benover
Is Benover too far out for you?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you cover business parks and estates near Benover, such as Woodfalls Industrial Estate?
Yes, sites like Woodfalls Industrial Estate are within our area, along with the rest of Benover. Photos and a short description are enough for a first look.
Can we specify the colour by RAL number?
Yes. We compare the RAL reference with the colours made for the specified sealant. We will tell you which colour is closest.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Will the colour fade over time?
It can, to a degree. Exposure, product and colour all play a part.
What do you charge?
Each job is quoted on its own details. To get one, call 01277 525 020 or email us.
Nearby places to Benover
What else we do in Benover
Do you need coloured sealant in Benover?
When frames are recoated or a space is rebranded, the old joints may no longer suit. New cladding colours, repainted frames or a refreshed shop fit all prompt colour changes.
Site and facilities staff are often the first to spot these:
- Hotel refurbishments with a set colour scheme
- Sealant that no longer suits recoated frames
- Stained or mouldy coloured joints in washrooms
- Previous reseals that don’t match the original
Trade counters and showrooms on estates such as Woodfalls Industrial Estate, 0.8 miles west of Benover, need neat joints where clients see them.
Questions to ask before you book
- What site paperwork they can supply
- Are they CHAS accredited or on Constructionline?
- Their plan for phasing and protecting the area
- How the existing material will be dealt with
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Restoring stained stone or masonry next to old sealant
- Colour variation across natural stone or brick that no single shade can match
- A colour that never alters with age
Not sure which it is? You can give us a call on 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Surfaces we seal
- Shop-fit joinery and counters
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Office fit-out finishes
- Cladding panels
Owners, agents and contractors
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Benover. Several sites can go on one quote, which keeps the paperwork simple.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.