Coloured and colour-matched sealant in Ford, West Sussex
Work needed on a colour-matched joint in Ford? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old colour-matched joints lifting at the edges
- Smeared sealant on stone or joinery
- Fit-outs with a sealant colour in the specification
Coloured sealant for businesses in Ford
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Our process
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself usually taking a day for a modest shop fit, and longer for a full building or several floors. If others near Ford need work, visits can be combined. You’ll have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
- Send any specification or drawings in advance
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, phone 01277 525 020 or email a schedule or drawings.
Advice
Coloured sealant for commercial buildings in Ford
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building. On resealing, matching the existing colour is often as important as the seal itself, particularly where the building’s look matters. We work on powder-coated and anodised frames, hotel bathrooms and public areas and natural stone and brick, and what we are called in for most is standard-colour sealant spoiling a high-end finish and marked sealant in hotel bathrooms. A specialist sealant contractor works differently from a general builder: in Ford, that means joint design, primers and backing rod as standard.
Rural business units near smaller places such as Ford are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Ford (BN18)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Frontages, fit-outs and joints in Ford
The sea is no more than about 2 miles from Ford. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. We choose a product rated for the exposure, then confirm the colours available for it. At least three named trading, business or retail sites lie within about 3 miles of Ford. Each new occupier on a park like these tends to refit, from reception to staff kitchen.
Offices and shops close to stations such as Ford station (under half a mile north of Ford) tend to be busy all day, so sealant work is planned around opening hours. A unit on an estate like Rudford Industrial Estate, 0.8 miles to the south of Ford, normally has an office front, a trade counter and staff facilities with joints of their own.
Ford is about 2 miles north-west of Littlehampton, in West Sussex. Any commercial site in Ford is covered, whether it’s a single job or part of a planned programme. Across West Sussex, 373 places are covered, Ford among them. There’s a separate page for Brighton, roughly 20 miles from Ford.
Commercial sites across BN18 are covered for colour-matched joints. For a building on Station Road, Ford Road and Rodney Crescent or nearby, send details and we’ll quote for colour-matched joints. Nearby places we also cover include Tortington (1 mile north), Horsemere Green (1 mile south), Climping (1 mile south), Wick (1 mile east) and Lyminster (1 mile east). Nearby towns on our patch include Worthing (8 miles east), Bognor Regis (5 miles south-west), Chichester (9 miles west), Selsey (11 miles south-west), Shoreham-by-Sea (14 miles east) and Lancing (11 miles east).
Around Ford
Recent enquiries here include premises near The Arundel Arms Public House At Ford Station, among other places. Ford has its own railway station: Ford station. Other landmarks nearby include Arundel and District Hospital (2.1 miles north) and Rustington Museum (3.5 miles east). The countryside around Ford includes WWT Arundel.
Ford: questions and answers
Does a coastal location like Ford affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Must a hotel around Ford close while you work?
Almost never. The work is phased so most rooms stay available. The plan is built around your bookings.
Does the colour affect how the joint performs?
The product type decides performance, not the colour. The joint gets the product it needs, in a colour from that product’s range with the same preparation and backing.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can wet areas have colour-matched sealant?
Yes. Sanitary silicones with anti-mould additives come in a range of colours too. We check the colour range of the sanitary product specified.
Will sunlight affect the sealant colour?
Some change over time is normal. Exposure, product and colour all play a part, and we can’t promise a colour that never alters.
Towns and villages near Ford
Other services in Ford
Cost factors for colour-matched joints
These are the things that shape the price:
- Whether old sealant has to be cut out first
- Joint width, depth and condition
- Phasing around occupants
- The total length or number of joints
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
- Specification clauses that apply
- A wide shot and a close-up of the area
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or send details through our quote form.
Different surfaces, different methods
Paintable sealants
Overpainting is most common on internal joints with little movement. We will tell you if a joint needs a non-paintable product.
Powder-coated and anodised frames
Frames finished to a RAL reference are a frequent colour-matching job. We compare the reference with the specified product’s colour range, and the nearest option is agreed.
Honest limits
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Repairing damaged frames or cladding
- Custom-mixed sealant colours
- Overpainting a joint that needs a non-paintable product
If in doubt, ring 01277 525 020 or email a schedule or drawings and we’ll say what we think.
Joints and surfaces we work on
- Cladding panels
- Shop-fit joinery and counters
- Office fit-out finishes
- Hotel bathrooms and public areas
- Natural stone and brick
- Powder-coated and anodised frames
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Do you need coloured sealant in Ford?
Joints repaired piecemeal often end up in several shades. Different products and batches used over the years leave a patchwork. Resealing a whole run in one agreed colour tidies it up.
Clients normally get in touch after noticing one or more of the following:
- Old sealant that has yellowed, darkened or faded
- Previous reseals that don’t match the original
- Untidy coloured beads with ragged edges
- Dirty, discoloured joints in public areas
A business with units at Rudford Industrial Estate and Ford Airfield Industrial Estate needn’t use two contractors for its sealant.
What to look for in a quote
- The named product and why it was chosen
- How long is the guarantee, and what does it include?
- How the existing material will be dealt with
- What site paperwork they can supply