Coloured and colour-matched sealant in Cromarty, Highland
Coloured and colour-matched sealant for visible joints throughout Cromarty and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Weathered sealant that no longer matches
- Hotel refurbishments with a set colour scheme
- Sealant that no longer suits recoated frames
Need coloured sealant in Cromarty?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant for commercial buildings in Cromarty
Colour-matched joints are often among the last items before handover. Adjacent finishes are masked and protected while we work, and snag any marks before we leave. Our workmanship carries a 12-month guarantee. If you have dirty, discoloured joints in public areas and failed coloured sealant that has split or peeled, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Cromarty, that means joint design, primers and backing rod as standard.
For a job around Cromarty, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Indoor work isn’t held up by rain.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Cromarty (IV11)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Commercial clients in Cromarty
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Other services in Cromarty
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Cromarty. That goes into the plan alongside the quote.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Getting the site ready
- Tell us which areas need to stay in use
- Tell staff and tenants when we will be in
- Send asbestos survey details if the building is pre-2000
Quotes
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email drawings and photos.
Related advice
Do you need coloured sealant in Cromarty?
Most enquiries start with a joint that looks wrong: white silicone against dark cladding, grey against timber or a yellowed bead on stone. A better-matched colour fixes the appearance without changing the joint’s job.
Site and facilities staff are often the first to spot these:
- Stained or mouldy coloured joints in washrooms
- Old sealant that has yellowed, darkened or faded
- Joints that need to match a new RAL frame colour
- Patch repairs in several different colours
For a hotel such as The Royal Hotel, which lies north-west of Cromarty, the colour of a joint at the bar or the bath matters to the look of the room.
Before you book anyone
- Is the sealant right for the movement and the substrate?
- Can the work be phased to keep areas open?
- What level of public liability insurance do they hold?
- How joint depth will be controlled
When to bring in a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Surface by surface
Cladding panels
Where panels vary in colour, the joint colour is agreed for the whole elevation. Sometimes a mid-tone suits better than matching one panel, and a sample settles it.
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Wet-area sealants come in colours other than white too.
Coloured sealant around Cromarty: points for this area
With the shore within about 1 mile, Cromarty counts as a coastal location. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. A 2-mile radius around Cromarty takes in a number of hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes, and the work can be phased so the rest of the hotel keeps trading.
For any commercial premises in Cromarty, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Cromarty is about 9 miles north-west of Nairn, in Highland. We cover commercial sites throughout Cromarty, whether it’s a single job or part of a planned programme. Cromarty is one of 256 places in Highland on our list. Our Aberdeen page has more on work in that area, about 80 miles away.
If you need coloured sealant in IV11, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are High Street, Allan Square and Denoon Place, and sites on any of them can send details for a fixed quote. Access to Cromarty is via the A832 and B9163 among other routes, so getting applicators and materials to site is simple. Close to Cromarty, our area also takes in Nigg (3 miles north), Davidston (3 miles south-west), Pitcalnie (3 miles north), Barbaraville (4 miles north-west) and Kilmuir (4 miles north-west). Nearby towns on our patch include Nairn (9 miles south-east), Cradlehall (14 miles south), Tain (9 miles north), Alness (8 miles west), Dornoch (14 miles north) and Invergordon (5 miles west). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Around Cromarty
A little further out are Cromarty Courthouse Museum (under half a mile east) and County Community Hospital (4.4 miles west). Not far away are Udale Bay RSPB reserve.
Your questions answered
Does a hotel in Cromarty need to shut while its sealant is renewed?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. We agree the order of rooms and the timings with you before we start.
Is Cromarty too far out for you?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
What will the job cost?
There isn’t a price list, because every site is different. With photos or drawings, we can give you a fixed quote.
Maintenance after handover
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Reseal whole runs rather than patching single joints
- Put the colour reference on the finishes schedule
- Brief cleaners about newly sealed joints
- Record the product and colour reference on the building file
Don’t let anyone patch a coloured joint with whatever sealant is to hand. Wrong-colour patches are obvious, so it is better to reseal the section properly.
Share the colour reference with anyone working on the finishes. That keeps new work in line with what’s there.