Coloured Sealant in Fareham
Planning work on a colour-matched joint in Fareham? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Discoloured joints on a visible elevation
- Colour changes after a rebrand or refit
- Standard-colour sealant spoiling a high-end finish
Coloured sealant in Fareham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
FAQs: Fareham
Can you work at a site such as Blackbrook Business Park, by Fareham?
Yes, sites like Blackbrook Business Park are within our area, along with the rest of Fareham. To start, just call the office on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Does a hotel in Fareham need to shut while its sealant is renewed?
In the majority of cases no closure is needed: we work room by room or floor by floor. Housekeeping and our team agree each day’s rooms.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Can wet areas have colour-matched sealant?
Yes, where the product range allows. Coloured sanitary sealant suits tiled and stone wet areas.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How much does the work cost?
Each job is quoted on its own details. For yours, speak to us on 01277 525 020 or email drawings and photos with a description of the work.
How we handle coloured sealant in Fareham
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints on sites across Hampshire. When replacing old joints, the new colour usually has to match what’s already there. The enquiries we see most involve old sealant that has yellowed, darkened or faded and failed coloured sealant that has split or peeled, on natural stone and brick, hotel bathrooms and public areas and shop-fit joinery and counters. A specialist sealant contractor works differently from a general builder: in Fareham, that means joint design, primers and backing rod as standard.
For a business or landlord in Fareham with one or two premises, it makes sense to bundle sealant jobs together: say a shopfront perimeter, a tea point, a washroom and some frames. One fixed quote then covers the lot.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
What happens if it’s left?
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. Where joints are on show, choosing a better colour is usually worth it. For businesses and landlords in Fareham, a tidy, sound joint also matters for appearance. Renewing it keeps the building looking cared for.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
What you get with us
- Specification-led, product-correct work
- 12-month guarantee on workmanship
- Colour agreed before work starts
- Failed material removed, not covered up
Read how commercial sealant jobs are priced or our accreditations and insurance.
Building owners, agents and FMs in Fareham
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Fareham can form part of a wider programme.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Parking and loading for town-centre jobs in Fareham are worth mentioning when you send details. On estates and business parks it’s normally simpler.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we will plan around them.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Preparing the site
- Tell us your opening times and when work is allowed
- Warn occupants and staff about the work
- Let us know about inductions and permits
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or send details through our quote form to discuss it first.
Related advice
What the job involves on each surface
Paintable sealants
Some joints are better sealed with a paintable product and decorated. That only works where the joint and specification allow it, as paint can crack on a moving joint.
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We’ll suggest the nearest standard colours so you can choose.
What Fareham’s businesses ask us to seal
Fareham sits close to the coast, within about 2 miles. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are typically where failed joints show first. Fareham is about 65 miles from central London. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. If you have premises across the region, one contractor can cover them all.
On a business park such as Blackbrook Business Park, which lies north-west of Fareham, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters. Sites a few miles apart, such as Blackbrook Business Park and The Boatyard Industrial Estate, can share one programme and one point of contact. Units at places like Fareham Shopping Centre, 0.8 miles east of Fareham, are refitted as brands change, and the joints have to suit each new scheme.
Fareham is about 10 miles south-east of Southampton, in Hampshire. If you’re looking for coloured sealant in Fareham, we can help, as we do across Hampshire. Across Hampshire, 723 places are covered, Fareham among them. Sites around Portsmouth have their own page, roughly 6 miles from Fareham.
Commercial sites across PO16, PO14, PO15 and SO31 are covered for colour-matched joints. For a building on Delme Square, High Street and Brookmeadow or nearby, we can quote for colour-matched joints. Fareham sits on or close to the A27 and A32, which helps when planning parking and deliveries for the job. Just outside Fareham, we also work in Fareham Common (1 mile east), Wallington (1 mile east), North Fareham (1 mile north-east), Peel Common (2 miles south) and Welborne (2 miles north). Bigger towns within reach include Winchester (15 miles north), Gosport (4 miles south-east), Havant (9 miles east), Eastleigh (10 miles north-west), Horndean (9 miles north-east) and Totton (14 miles west). Among the larger centres in Hampshire is Fareham, and its commercial and public buildings are all within our area.
Local landmarks in Fareham
In Fareham, that means premises near Wykeham House School, The Lord Arthur Lee pub and Fareham Academy, among other places. Fareham has its own railway station: Fareham station. Other landmarks nearby include Carron Row Farm Museum (1.7 miles west) and Knowle Hospital (2 miles north). Not far away are Portsdown Hill and West of the River Alver.
When something else is needed
We check first that sealant really is the fix. It won’t put right:
- A colour that never alters with age
- Cleaning or repairing the surrounding finishes
- Paint over sealant on joints that move too much
If in doubt, give us a call on 01277 525 020 or use the quote form and we will say what we think before you book.
Joints and surfaces we work on
- Shop-fit joinery and counters
- Cladding panels
- Office fit-out finishes
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.