Coloured Sealant contractors in Brunstane
Coloured and colour-matched sealant for visible joints across Brunstane, by CSCS-carded applicators. CHAS accredited and fully insured.
- Coloured joints that have cracked with movement
- Joints that need to match a new RAL frame colour
- Discoloured joints on a visible elevation
Coloured sealant near Brunstane
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Frontages, fit-outs and joints in Brunstane
Brunstane lies within about 1 mile of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. We choose a product rated for the exposure, then confirm the colours available for it. A 2-mile radius around Brunstane takes in a number of hotels. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter.
Premises within reach of Brunstane station (under half a mile south of Brunstane) often have busy frontages where joints are seen by everyone passing. For a hotel such as Temple Hall Hotel, less than half a mile to the north-east of Brunstane, the colour of a joint at the bar or the bath matters to the look of the room.
Brunstane is about 2 miles west of Musselburgh, in Edinburgh. Anywhere in EH15, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Brunstane is one of 174 places we cover in Edinburgh.
Postcode districts covered here: EH15. If your site is on Hope Lane, Joppa Road and Milton Road or close by, send details and we’ll quote for colour-matched joints. If your building is just outside Brunstane, we cover Magdalene (1 mile south-west), South Portobello (1 mile west), Bingham (1 mile south-west), Niddrie Mains (1 mile south-west) and Mountcastle (1 mile west). Nearby towns on our patch include Edinburgh (4 miles west), Leith (3 miles north-west), Bonnington (3 miles north-west), Greenside (3 miles west), Broughton (3 miles west) and Bellevue (4 miles west).
What’s near Brunstane
Locally, jobs take us to sites close to 47 Figgate Lane pub, Abercorn Park and Portobello Library, among other places. Brunstane has its own railway station: Brunstane station. Nearby you will also find Cameron Toll Shopping Centre (2.8 miles south-west) and Musselburgh Doll Museum (1.9 miles east). The countryside around Brunstane includes Whinny Hill and Duddingston Loch.
Coloured sealant in Brunstane
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building. When replacing old joints, the new colour usually has to match what’s already there, especially on a listed or high-profile elevation. We work on powder-coated and anodised frames, shop-fit joinery and counters and cladding panels, and what we are called in for most is old colour-matched joints lifting at the edges and a run of joints in mismatched shades. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Brunstane is the same: the right product in a properly prepared joint.
Natural stone gives a lot of Scottish city premises their character: sandstone in most, granite in Aberdeen. Stone needs a neutral-cure sealant suited to it and a colour that sits quietly against the masonry.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Brunstane (EH15)
- Wider area
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Keep the same sealant colour across a brand
- Record the product and colour reference on the building file
- Keep harsh solvents away from visible joints
- Approve a sample bead on high-profile areas
Include coloured sealant in planned building checks. Look for splits, lifting edges and staining, and plan resealing before it looks tired.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches.
What we are called out for in Brunstane
Failed sealant still has to be dealt with, whatever its colour: it can crack, peel or harden with age and movement. The fix is a full cut-out and a new bead in the right colour.
Clients typically get in touch after noticing one or more of the following:
- Stained or mouldy coloured joints in washrooms
- Weathered sealant that no longer matches
- Previous reseals that don’t match the original
- White or grey sealant that clashes with the finish
If you run a unit on an estate such as A1 Industrial Estate, which lies west of Brunstane, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.
What your quote should include
- How long is the guarantee, and what does it include?
- The named product and why it was chosen
- Who will actually carry out the work
- Will RAMS and insurance details be available?
What the job involves on each surface
Natural stone
Sandstone, limestone and granite each have distinct tones. Colour is agreed on site where possible before the full run.
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We show you the closest options in the product’s range for approval.
Quoting for work in Brunstane
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Phasing around occupants
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
- Quantities, in metres or numbers
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- Access details, including height
- Photos of the joints, close up and from further back
- The product your specification calls for
- Asbestos survey details if the building is older
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or send photos by email.
Work for main contractors and building owners
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Brunstane. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
How a job runs
Tell us your site hours and access windows and we will plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
What we need from you
- Tell us what induction or permit system the site runs
- Warn occupants and staff about the work
- Make sure the joints can be reached
Request a quote
To get a fixed quote, phone 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
FAQs: Brunstane
Can being near the sea in Brunstane affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can you work at a site such as A1 Industrial Estate, by Brunstane?
Yes, sites like A1 Industrial Estate are within our area, along with the rest of Brunstane. To start, just call the office on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How long does a job like this take?
That varies with the scale of the job, though a typical visit normally takes a day for a modest shop fit, and longer for a full building or several floors. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.