Coloured Sealant contractors in Broomer's Corner
Planning work on a colour-matched joint in Broomer's Corner? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Coloured joints that have cracked with movement
- Colour changes after a rebrand or refit
- Smeared sealant on stone or joinery
Coloured sealant near Broomer's Corner
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Common questions from Broomer's Corner clients
Is Broomer's Corner too far out for you?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you match sealant colours for premises in Broomer's Corner?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photos and we’ll confirm what’s available for the product.
How do I request a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure.
Can you quote from photographs?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
How long does a job like this take?
It depends on the scope, but the work typically takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we’ll set out a timescale with the quote.
Coloured sealant in Broomer's Corner
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building on sites across West Sussex. When replacing old joints, the new colour normally has to match what’s already there, especially on a listed or high-profile elevation. Most enquiries involve coloured joints that have cracked with movement and untidy coloured beads with ragged edges, across shop-fit joinery and counters, office fit-out finishes and powder-coated and anodised frames. Searching for sealant specialists in Broomer's Corner? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Business units in the countryside around places like Broomer's Corner are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Broomer's Corner (RH13)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
After handover, a little attention goes a long way:
- Approve a sample bead on high-profile areas
- Brief cleaners about newly sealed joints
- Avoid piecemeal repairs on coloured joints
- Record the product and colour reference on the building file
Clean coloured joints with mild, non-abrasive products. Harsh chemicals and scouring can change how the colour looks.
Use one product and colour reference across a building or brand. It keeps repairs and new sites consistent and easier to manage.
Sealant on show in Broomer's Corner’s commercial buildings
At about 38 miles from central London, Broomer's Corner is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. Occupiers with several premises in the region tend to prefer one contractor and one point of contact. The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
Parks like Crays Court (business park), 2 miles south of Broomer's Corner, see tenants come and go, and every move-in brings joints to seal. Occupiers with premises at both Crays Court (business park) and Pondtail Farm (Business Park) could have the sealant at each handled under one quote. Shops and cafés around stations like Billingshurst station (to the north-west of Broomer's Corner) trade from early, so work is timed around them.
Broomer's Corner is about 7 miles south-west of Horsham, in West Sussex. Our applicators travel to Broomer's Corner for work on colour-matched joints. 373 places across West Sussex fall within our area, Broomer's Corner among them. Brighton is covered too, around 15 miles from Broomer's Corner.
Anyone looking for coloured sealant in RH13 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Saucelands Lane, Sincox Lane and Hooklands Lane, and sites on any of them can send details for a fixed quote. Just outside Broomer's Corner, we also work in Whitehall (1 mile east), Shipley (1 mile north-east), Dragons Green (2 miles north-east), Dial Post (2 miles south-east) and Ashington (3 miles south). Further afield, our area takes in Crawley (13 miles north-east), Horsham (7 miles north-east), Worthing (11 miles south), Haywards Heath (13 miles east), Burgess Hill (12 miles east) and Littlehampton (13 miles south-west).
Local landmarks in Broomer's Corner
For rail, the closest station is Billingshurst station, roughly 3.4 miles north-west. Green spaces nearby include Knepp Wildland.
From enquiry to sign-off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. If others near Broomer's Corner need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
What we need from you
- Confirm the product named in the specification
- Point out parking and an unloading spot
- Send your site hours and access windows
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or send photos by email.
Read more
Nearby places to Broomer's Corner
What else we do in Broomer's Corner
What affects the price in Broomer's Corner
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How much existing material needs removing
- The product specified
- Travel to remote or island sites
- Any access equipment needed
The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.
Sending details for a quote
To price the job accurately, we need to understand the site. Send us:
- When you need the work done
- Where the site is, with the postcode
- The asbestos register, for older buildings
- Access details, including height
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
What we can’t put right
Being straight saves everyone time. New sealant won’t cure:
- Overpainting a joint that needs a non-paintable product
- Stopping sealant from ever changing colour outdoors
- Finishes that change colour from one area to another
Not sure which it is? You can phone 01277 525 020 or use the quote form and we will tell you honestly before you book.
Surfaces we seal
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Office fit-out finishes
- Natural stone and brick
- Cladding panels
- Powder-coated and anodised frames
Surface by surface
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Brick and masonry
Movement joints in brickwork are long and visible. A well-chosen colour helps them blend in while the product still suits the movement.