Coloured and colour-matched sealant in Boyatt Wood, Hampshire
We carry out coloured and colour-matched sealant for visible joints in Boyatt Wood and the surrounding area. Send photographs or drawings for a fixed quote.
- Old colour-matched joints lifting at the edges
- Old sealant that has yellowed, darkened or faded
- Marked sealant in hotel bathrooms
Coloured sealant for businesses in Boyatt Wood
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Boyatt Wood
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, and we’ll confirm the colours available for the specified product. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. We work on cladding panels, hotel bathrooms and public areas and natural stone and brick, and the usual reasons a site gets in touch are shop fits that need consistent sealant colours across sites and standard-colour sealant spoiling a high-end finish. For commercial sealant work in Boyatt Wood, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In a smaller place such as Boyatt Wood, commercial buildings are typically a mix of shops, a pub or café, a school, a surgery and perhaps a few business units. They’re not big jobs one by one, but their joints need the same preparation as anywhere.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Place
- Boyatt Wood (SO50, SO53)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What the job involves on each surface
Paintable sealants
Paintable sealants suit internal, low-movement joints best. We’ll tell you if a joint needs a non-paintable product.
Shop-fit and joinery finishes
Shop fits bring laminate, timber, metal and stone together, each with its own colour. We choose sealant colours that suit each junction.
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first, and our waste is bagged and taken away as we go. If neighbouring businesses or buildings around Boyatt Wood need work too, visits can be combined. Tell us your site hours and we will plan around them.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Send asbestos survey details if the building is pre-2000
- Flag any permit to work we will need
Getting a fixed quote
To get a fixed quote, phone 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
What sets the cost
We price every job individually. The things that drive the figure:
- Removal of failed or old sealant
- The product specified
- Phasing around occupants
- Access and working height
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Before you send an enquiry
Whether it’s one area or a whole building, these details speed things up:
- Photos of the joints, close up and from further back
- How the joints are reached, and at what height
- Any specification or named product
- Approximate linear metres or a joint schedule
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or use the quote form.
Boyatt Wood: questions and answers
Is Boyatt Wood Industrial Estate, near Boyatt Wood, within your area?
Yes, sites like Boyatt Wood Industrial Estate are within our area, along with the rest of Boyatt Wood. A few photographs and the unit address let us price the work.
Do hotels near Boyatt Wood have to close for sealant work?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. The plan is built around your bookings.
How long does a typical visit take?
It depends on the scope, though a typical visit usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. For bigger or phased jobs, we’ll set out a timescale with the quote.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Does coloured sealant change colour outdoors?
Some change over time is normal. How much depends on the product, the colour and the exposure.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Shops, offices and hotels in and around Boyatt Wood
Several hotels sit less than 2 miles from Boyatt Wood. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme; work is planned so the hotel keeps trading. Boyatt Wood is in the South East, one of the UK’s drier regions. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
A unit on an estate like Boyatt Wood Industrial Estate, under half a mile to the south-west of Boyatt Wood, normally has an office front, a trade counter and staff facilities with joints of their own. If you have premises on more than one site, say at Boyatt Wood Industrial Estate and Cannons Retail Park, one contractor and one quote can cover both. Offices and shops close to stations such as Eastleigh station, 0.9 miles south-east of Boyatt Wood, tend to be busy all day, so sealant work is planned around opening hours.
Boyatt Wood is about 1 mile north-west of Eastleigh, in Hampshire. Anywhere in SO50, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 723 places across Hampshire fall within our area, Boyatt Wood among them.
If you need coloured sealant in SO50 and SO53, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Lawn Road, Arthur Road and Darwin Road or close by, send details and we’ll quote for colour-matched joints. Sites close to Boyatt Wood are covered too, including Allbrook (1 mile north), Eastleigh (1 mile south-east), Chandler's Ford (1 mile west), Highbridge (1 mile north-east) and Lord's Wood (1 mile east). A short drive away, we cover Winchester (6 miles north), Gosport (15 miles south-east), Fareham (11 miles south-east), Totton (8 miles south-west), Hedge End (5 miles south-east) and Romsey (5 miles west).
Near you in Boyatt Wood
In Boyatt Wood, that means premises near Shakespeare Junior School, Thornden School and Lakeside Country Park and the streets around them. For rail, the closest station is Eastleigh station, about 0.9 miles south-east of the centre. Nearby you will also find Eastleigh Museum (0.9 miles south) and Moorgreen Hospital (3.9 miles south-east). Not far away are Flexford Nature Reserve.
Why it’s worth doing now in Boyatt Wood
Matching new joints to the existing ones is easier when the whole run is done together. Piecemeal repairs over several years tend to drift in colour, so a planned reseal often looks better value. Small buildings around Boyatt Wood suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why appoint us
- A fixed quote before work starts
- RAL and finish matching where the product range allows
- Fully insured
- Colour agreed before work starts
Take a look at what affects the cost and our accreditations.
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Look at the cured colour before the full run
- Brief cleaners about newly sealed joints
- Settle the colour with the designer at the start
- Record the product and colour reference on the building file
Note the sealant type and colour on the building file. Future repairs can then use the same colour, avoiding a patchwork.
Settle the colour early in the project. When colour is left to the last minute, it is often wrong.