Anmore coloured sealant
Coloured and colour-matched sealant for visible joints across Anmore, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Shop fits that need consistent sealant colours across sites
- A bead that fights the cladding or frame colour
- Failed coloured sealant that has split or peeled
Coloured sealant across Anmore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle coloured sealant in Anmore
Architects, designers and brand teams often specify the sealant colour as carefully as the finishes around it. Most sealant types are made in a broad range of standard colours, so we check what the specified product is made in at quote stage. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. If you have discoloured joints on a visible elevation and white or grey sealant that clashes with the finish, we can help, whatever the surface. A single leaking joint is often how a building in Anmore first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Business units in the countryside around places like Anmore are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Anmore (PO7)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Signs you need coloured sealant in Anmore
Colour-matched sealant is typically requested because a standard bead has spoiled the finish: white silicone against dark cladding, grey against timber or a yellowed bead on stone. Replacing it with a suitable colour restores the intended look.
Any of the following is a good reason to get the joints checked over:
- Old colour-matched joints lifting at the edges
- Fit-outs with a sealant colour in the specification
- Untidy coloured beads with ragged edges
- Patch repairs in several different colours
For tenants and agents on sites such as Parklands Business Park, 0.9 miles to the south-west of Anmore, office fit-outs, reception joints and window perimeters are the usual sealant work.
Comparing quotes
- Whether primer will be used where the manufacturer specifies it
- Their pre-qualification and accreditations
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What the guarantee covers, and for how long
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Rural sites near Anmore may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Send any specification or drawings in advance
- Point out any areas we must not close
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email us.
Related advice
Working on commercial sites near Anmore
The 3 miles around Anmore take in at least three named trading estates, business parks or retail parks. Each new occupier on a park like these tends to refit, from reception to staff kitchen. Rainfall across the South East, Anmore included, is lower than in many parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
Shops and cafés around stations like Bedhampton station, 4 miles to the south-east of Anmore, trade from early, so work is timed around them. If you have premises on more than one site, say at Parklands Business Park and Westfield Industrial Estate, one contractor and one quote can cover both.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Any commercial site in Anmore is covered, whether it’s a single job or part of a planned programme. We work across 723 places in Hampshire. We also cover Portsmouth, some 7 miles away.
Work on colour-matched joints is covered throughout PO7, for business premises of every kind. We cover commercial and managed buildings on Anmore Road and Soake Road and the roads nearby. Sites close to Anmore are covered too, including Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Nearby towns on our patch include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
What’s near Anmore
Locally, jobs take us to sites close to The Cowplain School and The Mead End pub, among other places. The nearest railway station is Bedhampton station, about 4 miles south-east. Other landmarks nearby include Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). For a walk, there’s St Clair's Meadow and Windmill Hill.
Commercial clients in Anmore
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Anmore can sit alongside others in a wider programme.
What affects the price in Anmore
Your fixed quote is built from the real scope. It takes account of:
- How accessible the joints are
- Joint width, depth and condition
- Location, for remote and island sites
- How much there is to seal
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- Your programme or deadline
- The postcode of the building
- How the joints are reached, and at what height
- Clear photographs of the problem areas
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Nearby places to Anmore
Other services in Anmore
What we can’t put right
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Paint over sealant on joints that move too much
- Stopping sealant from ever changing colour outdoors
- Exact bespoke colour matches beyond the product’s range
If you are not sure, just call 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Joints and surfaces we work on
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
- Office fit-out finishes
- Shop-fit joinery and counters
- Natural stone and brick
Questions we are asked in Anmore
Do you offer colour-matched sealant for buildings in Anmore?
Yes, we can typically get close to most finishes from the product’s colour range. Send colour references or photographs and we’ll confirm what’s available for the product.
Will you take on work at estates like Parklands Business Park, close to Anmore?
Yes, sites like Parklands Business Park are within our area, along with the rest of Anmore. To start, just speak to us on 01277 525 020 or email us with the unit, the joints involved and your access times.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.
Can staff carry on working while you are here?
Yes, as long as we plan it. Tell us your site hours and access windows and we’ll plan around them.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.