Expansion and movement joint sealing in Anmore, Hampshire
Need expansion joint sealing in Anmore? It’s simple: send details, get a quote, we seal, guaranteed.
- Expansion joints split through the centre of the bead
- Spalled or broken joint edges in floors and decks
- Debris jammed in movement joints
Expansion joint sealing across Anmore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Questions about Anmore
Is a hospital such as Queen Alexandra Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Will you take on work at estates like Parklands Business Park, close to Anmore?
Yes, sites like Parklands Business Park are within our area, along with the rest of Anmore. To start, just call the office on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
What sealant do you use in movement joints?
It depends on the movement, exposure and traffic. Facades often take a low-modulus silicone; floors and decks usually need a polyurethane unless the specification names something else.
Can you work on car park ramps and decks?
Yes. Let us know the opening hours and which levels or bays have to stay available and we will plan around them.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
When can the area be used after sealing?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
How we handle expansion joint sealing in Anmore
Brickwork and blockwork walls have vertical movement joints at intervals that most people only notice when the sealant has gone. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied, primed where the manufacturer specifies. Most enquiries involve joints packed with grit and debris and layers of sealant in a movement joint, on car park decks and ramps, precast concrete panel joints and brickwork movement joints. One point of contact handles commercial sealant work in Anmore from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Anmore, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Anmore (PO7)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
These are the things that shape the price:
- Whether old sealant has to be cut out first
- The total length or number of joints
- Induction, permit and paperwork requirements
- The product specified
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Asbestos survey details if the building is older
- Clear photos of the problem areas
- When you need the work done
- Any specification or named product
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
How a job runs
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact. Rural sites near Anmore may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
- Send asbestos survey details if the building is pre-2000
Request a quote
For a fixed quote, phone 01277 525 020 or use the quote form. You can also send details through our quote form.
Related advice
Nearby places to Anmore
Other services in Anmore
Different surfaces, different methods
Brickwork and blockwork joints
Brick and block edges need careful preparation. We clean them back to sound material and prime where the manufacturer specifies, then seal and tool the joint.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Cracking or settlement that calls for an engineer’s assessment
- Changing the joint layout or spacing of a structure
If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Joints and surfaces we work on
- Precast concrete panel joints
- Blockwork control joints
- Car park decks and ramps
- Brickwork movement joints
- Cladding panel joints
- Podiums and floor movement joints
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Plan racking layouts so feet don’t land on a joint
- Leave barriers in place until fresh joint sealant has cured
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Act on the first tear or lifting edge rather than waiting
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file so future maintenance isn’t guesswork.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers, and the damage spreads along the joint. Sealing early protects the edges.
Joints that move: notes for Anmore
At least three named trading, business or retail sites lie within about 3 miles of Anmore. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Anmore lies roughly 58 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day.
A healthcare site such as Queen Alexandra Hospital (3.6 miles south of Anmore) depends on car parks, ramps and service yards whose joints take traffic all day. In a school such as Denmead Infant School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Phasing is what makes joint work possible on busy sites such as Westfield Industrial Estate (2.4 miles east of Anmore): one bay, aisle or car park row at a time.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Our applicators travel to Anmore for work on movement joints, handled exactly as we handle every other area. We work across 723 places in Hampshire, from busy centres to rural villages. There’s a separate page for Portsmouth, about 7 miles away.
If you need expansion joint sealing in PO7, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Anmore Road and Soake Road. We also cover Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). A short drive away, we cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Landmarks near Anmore
In Anmore, that means premises near The Cowplain School and The Mead End pub, among other places. The closest station to Anmore is Bedhampton station, roughly 4 miles south-east of the centre. Nearby you will also find Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Not far away are St Clair's Meadow and Windmill Hill.