Washroom Sealing contractors in Selham
Sealant work in Selham for main contractors, managing agents and facilities managers: sealing in commercial washrooms, showers, kitchens and wet areas, quoted at a fixed price.
- Panel joints letting water behind
- Open joints along basins and vanity units
- Users noticing mouldy joints
Washroom sealing across Selham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing in Selham, done properly
We reseal washrooms and wet areas in offices, hotels, schools, universities, gyms, healthcare buildings and care homes, along with staff kitchens and tea points. Product and method follow how hard each area is used and cleaned. Site teams most often ask us about stained sealant around pans and urinals and failed sealant in a tea point or staff kitchen, on IPS panels and cubicles, showers, trays and wet room floors and accessible toilets and changing rooms. Searching for sealant specialists in Selham? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Rural businesses near smaller places such as Selham, from cafés to event venues, rely on washrooms and kitchens that stay clean. Tell us your opening times and quiet periods and we’ll plan around them.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Selham (GU28)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Selham need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We survey each room, count the joints and note anything behind them that needs another trade.
- We agree which rooms close and when, so users always have somewhere to go.
- We strip out the old bead and clean off the residue left behind.
- We clean and dry every surface so the new sealant can grip.
- We lay a sanitary silicone bead and tool it smooth so it is easy to clean.
- You get a reopening time for every room, with signage left up until then.
Getting the site ready
- Agree which areas must stay open
- Send asbestos survey details if the building is pre-2000
- Flag any permit to work we’ll need
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or use the quote form with what you know.
Related advice
Work for main contractors and building owners
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
When to call us in Selham
Washrooms are warm, damp and full of organic residue, and silicone joints hold onto all three. Even anti-mould grades can be colonised over time where extraction is poor.
Typical triggers for a call:
- Kitchen worktop joints that can’t be kept clean
- Black mould inside silicone joints that cleaning can’t shift
- Split or peeling sealant at shower trays
- Discoloured joints around urinals and WC pans
Where you’re responsible for a hall attached to a building such as Church of St James, its kitchen and toilets need sealant that stays cleanable.
What your quote should include
- How the joint faces will be prepared and primed
- How they’ll work around occupants
- How joint depth will be controlled
- What the guarantee covers, and for how long
Leave it or put it right?
A tired-looking washroom doesn’t always need a refurbishment. If the finishes are in good order, replacing the sealant may do much of what’s needed while bigger works are planned. For buildings around smaller places like Selham, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
A quote for washrooms and wet areas depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
What you get with us
- Work carried out by CSCS-carded applicators
- Colour agreed before work starts
- One contact handling all your sites
- Standard and matched colours in many product ranges
Read what affects the cost and how we’re accredited.
What else we do in Selham
Looking after the joints
A few simple habits keep the new joints working:
- Leave signs up until the cure time is over
- Keep a record of which washrooms need attention
- Don’t leave an open joint at a basin or tray
- Don’t leave trays and floors sitting wet
Ventilation is half the battle. A room that stays damp will grow mould on almost anything so report fans that aren’t working to your building services team.
In food areas, cleanability is something environmental health officers look at. Failed sealant around sinks and worktops is easy to put right in good time.
Washroom sealing in Selham: the local picture
Selham lies roughly 44 miles out from central London, in a commuter belt where offices and business parks are common. Business park offices have washrooms in daily use by staff, which is why the work is phased.
Welfare facilities in units on estates such as Hampers Common Industrial Estate, 3 miles east of Selham, have showers, toilets and kitchens with sealant that works hard. Staff changing rooms and patient toilets at places like Midhurst Community Hospital, 2.9 miles to the west of Selham, need cleanable, sound silicone.
Selham is about 8 miles south of Haslemere, in West Sussex. We cover commercial sites throughout Selham, for single jobs and planned programmes alike. We work across 373 places in West Sussex, from busy centres to rural villages. For work in that direction, see our Portsmouth page, about 21 miles away.
Postcode districts covered here: GU28 for washrooms and wet areas. We also cover South Ambersham (1 mile west), River (2 miles north), Tillington (2 miles north-east), Upperton (2 miles north-east) and Rotherbridge (2 miles east) for washrooms and wet areas. Further afield, our area takes in Bognor Regis (13 miles south), Chichester (11 miles south-west), Littlehampton (13 miles south-east), Rustington (14 miles south-east), Storrington (11 miles east) and Billingshurst (10 miles east).
Around Selham
A little further out are Midhurst Community Hospital (2.9 miles west) and Coultershaw Heritage Site (2.5 miles east). Green spaces nearby include Graffham Common.
Your questions answered
Is Selham too small for you to travel to?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Must every washroom in our Selham building shut while you work?
Rarely all at once: work is phased so some facilities are always available. We will tell you the curing time for the product before we start.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you use special sealant for toilets and showers?
Sanitary silicone with anti-mould additives in most cases. We use neutral-cure versions on stone, some metals and near mirrors.
Is old silicone taken out first?
The failed bead is always removed. New silicone won’t stick to the old, so sealing over it soon peels.
Is there a guarantee on the work?
Our workmanship has a 12-month guarantee backed by public liability insurance.
Can washrooms stay open while you work?
The work is phased so users always have somewhere to go. We work through the building a room or section at a time. Tell us your site hours and access windows and we will plan around them.
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.