The Mastic Doctor team standing beside their branded vans outside an office building
Buckinghamshire · England

Commercial washroom and wet-area sealing in Sedrup, Buckinghamshire

Sealant work in Sedrup for main contractors, managing agents and facilities managers: sealing in commercial washrooms, showers, kitchens and wet areas, quoted at a fixed price.

  • Black mould inside silicone joints that cleaning can’t shift
  • Open joints at the base of cubicle panels
  • Washrooms that look worn because of the sealant
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS accredited
£5m public liability

Washroom sealing near Sedrup

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Cost factors for washrooms and wet areas

Quotes vary with the job. It mainly depends on:

  • Phasing around occupants
  • How accessible the joints are
  • Distance, for remote addresses
  • How much existing material needs removing

The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.

What to include in your enquiry

Diagnosis starts before we arrive. Tell us:

  • The postcode of the building
  • Whether an asbestos survey exists
  • Any specification or named product
  • Drawings or a marked-up plan, if available

Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email us.

Washroom sealing for commercial buildings in Sedrup

When mould has spotted a silicone joint, more cleaning won’t remove it. The mould has rooted into the silicone itself so it returns whatever the cleaning regime. Replacing the bead is the lasting treatment. We work on IPS panels and cubicles, vanity units and basins and showers, trays and wet room floors, and what we’re called in for most is failed joints along IPS and cubicle panels and failed sealant in a tea point or staff kitchen. A specialist sealant contractor works differently from a general builder: in Sedrup, that means joint design, primers and backing rod as standard.

In and around smaller places like Sedrup, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Mould gets into sealant in any washroom that doesn’t dry out, and once it’s in, the sealant is replaced.

Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.

Location
Sedrup (HP17)
Region
Buckinghamshire
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Telephone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

What we can’t put right

Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:

  • Water escaping beneath the floor rather than through a joint
  • Hollow tiles or loose panels behind the joint
  • Water from plumbing, not from a joint

If in doubt, call the office on 01277 525 020 or email the details over and we’ll say what we think before you book.

Where we work in Sedrup

  • Kitchens and tea points
  • Vanity units and basins
  • Urinals and WCs
  • Showers, trays and wet room floors
  • Accessible toilets and changing rooms
  • IPS panels and cubicles

Diagnose, treat, sign off

At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. If others near Sedrup need work, visits can be combined. A fixed quote is given before anything starts.

  1. Every room is surveyed and the failed joints listed.
  2. The fixed quote sets out the rooms, the products and the phasing.
  3. Old sealant is removed completely and the faces cleaned.
  4. Joints are degreased and dried.
  5. A sanitary silicone bead is laid and given a smooth tooled finish.
  6. Each area is handed back when ready.

Before we start on site

  • Confirm the product named in the specification
  • Arrange parking or a loading space
  • Let building users know which areas are affected

Get a fixed quote

A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or send photos by email if you’d rather talk the job through.

Ask for a quote

Related advice

Keeping the joints sound

Once the work is signed off, these steps help:

  • Mention any site permits or estates rules at quote stage
  • Keep extract fans working and vents clear
  • Brief cleaning staff to treat joints gently
  • Note failing joints building by building

Where possible, have shower floors and trays squeegeed after busy periods. Joints that sit wet for hours fail sooner.

A split joint at a shower tray can leak for a long time before anyone sees it. By then, other trades may be needed as well, so reseal when you first spot a split.

When to bring in a specialist

A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.

What happens if it’s left?

Running fresh silicone along a failed bead hides the problem briefly. It doesn’t bond, so it peels and traps dirt behind it. Cutting out completely and cleaning back takes a little longer and lasts. One visit to deal with every failing joint makes more sense than several trips to a place like Sedrup. Send photos of each area and we will quote for the lot.

No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.

Why choose Mastic Doctor in Sedrup

  • Sealing commercial buildings since 2005
  • Fully insured
  • Our applicators hold CSCS cards
  • Colours confirmed for the specified product

Read what affects the cost and how we’re accredited.

Washroom sealing around Sedrup: how the place shapes the job

Sedrup lies roughly 38 miles out from central London. Washrooms in commuter-belt offices take constant weekday traffic, which is why the work is phased. The area within 2 miles of Sedrup holds a number of hotels. Behind every hotel door there’s a bathroom whose sealant will need renewing sooner or later. We work a handful of rooms at a time, so the hotel keeps letting the rest.

At a university such as University Campus Aylesbury Vale, 1.9 miles to the north-east of Sedrup, summer is the usual window for resealing residence bathrooms. At a college such as Buckinghamshire College Group (1.5 miles north-east of Sedrup), washroom and kitchen sealant is best renewed in the holidays or in phases during term. Office toilets at parks like Fountain Business Centre, 1.7 miles east of Sedrup, take steady weekday use, and mouldy silicone soon shows.

Sedrup is about 2 miles south-west of Aylesbury, in Buckinghamshire. Looking for washroom sealing in Sedrup? We can help. Our Buckinghamshire coverage takes in 308 places, from busy centres to rural villages. Our Oxford page has more on work in that area, about 17 miles away.

We take on washrooms and wet areas across the HP17 postcode area, whatever the building. We also cover Bishopstone (1 mile south), Walton Court (1 mile east), Upton (2 miles west), Ford (2 miles south-west) and Dinton (2 miles west) for washrooms and wet areas. Further afield, our area takes in High Wycombe (12 miles south), Chesham (11 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Beaconsfield (15 miles south-east) and Elmhurst (3 miles north-east).

Near you in Sedrup

In Sedrup, that means premises near The Harrow pub, The Mandeville School and Pebble Brook School. The nearest railway station is Aylesbury station, about 1.7 miles north-east. Nearby you’ll also find Dinton Castle (2.1 miles west) and Friars Square (1.8 miles north-east). The countryside around Sedrup includes Beacon Hill and Snakemoor.

Map of Sedrup © OpenStreetMap contributors

Your questions answered

Is Sedrup too small for you to travel to?

No. Small places get the same service as large ones. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.

Does a hotel in Sedrup need to shut while its sealant is renewed?

Rarely, if ever. We take a few rooms out at a time. Tell us your quiet periods and access windows and we will plan around them.

What site paperwork can you supply?

Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.

Can you handle several sites?

Yes. A group of buildings can go on one quote, with one point of contact.

Can weather delay the job?

Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.

How much does the work cost?

Each job is quoted on its own details. For yours, ring 01277 525 020 or email a schedule or drawings.

Do you offer coloured sealant?

It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.

Accreditations

Trusted. Accredited. Insured.