Washroom Sealing contractors in Murston
Commercial sealant work in Murston for contractors, FMs and building owners: sealing in commercial washrooms, showers, kitchens and wet areas, quoted at a fixed price.
- Discoloured joints around urinals and WC pans
- Mould spotting along silicone joints
- Panel joints letting water behind
Washroom sealing in Murston
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
About our washroom sealing in Murston
You can’t shut every toilet in an office, school or hotel at once. Work is phased by room or by section, so there are always facilities in use. Give us your site hours and access windows and the phasing is planned around them. If you are dealing with kitchen worktop joints that can’t be kept clean and washrooms that look worn because of the sealant, we can put it right. One point of contact handles commercial sealant work in Murston from the first photographs to the final walk-round, whether it’s one building or several.
Jobs in a smaller place such as Murston are often one building: a school’s toilets, a café kitchen, a surgery’s washrooms. A list and photographs let us quote and plan so it’s done in one visit where possible.
Work we carry out in Kent comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or email the details over and we will arrange a return visit.
- Location
- Murston (ME10, ME9)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
When to call us in Murston
A lot of failed washroom sealant was laid over an old bead or a dirty surface. Silicone won’t adhere to a silicone bead, so it soon lets go.
These are often picked up first by site or facilities staff:
- Complaints from staff, guests or users about tired washrooms
- Black mould inside silicone joints that cleaning can’t shift
- Open joints along basins and vanity units
- Resealing that didn’t last because the old bead stayed
Healthcare washrooms on sites such as Sittingbourne Memorial Hospital (to the south-west of Murston) are resealed area by area, under the site’s own infection-control rules.
What to look for in a quote
- Can the work be phased to keep areas open?
- How the existing material will be dealt with
- Do they follow the manufacturer’s priming guidance?
- Will CSCS-carded applicators be on site?
Questions we’re asked in Murston
Can you work around term dates at a campus such as KITE College?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Can you work on a hospital site such as Sittingbourne Memorial Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How long does a typical visit take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Places near Murston
Also in Murston
Quoting for work in Murston
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Specialist products, such as fire-rated or hygienic sealants
- Backing rod, priming and other preparation
- Location, for remote and island sites
- How much existing material needs removing
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
- The product your specification calls for
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
How the job changes by surface
Healthcare and care settings
Assisted bathrooms and accessible toilets get heavy use so their sealant tends to fail sooner.
Changing rooms and gyms
Changing rooms can be phased so one stays open. Phasing follows your site hours and access windows.
Wet areas in Murston’s workplaces
With the shore within about 2 miles, Murston counts as a coastal location, and places by the sea often rely on visitors, so their hotels and holiday lets see heavy seasonal use. Showers and en suites in constant use are where silicone moulds and splits first, and the quieter months are the natural time to reseal. There are a number of hotels within about 2 miles of Murston. En suite bathrooms, staff changing rooms and kitchens all need their sanitary silicone renewed in time. The work can go floor by floor, agreed with housekeeping.
Office washrooms on sites such as Kent Science Park, 2.3 miles to the south-west of Murston, are in use all working day, so resealing is phased to keep some open. For a college such as KITE College, which lies north-west of Murston, half-term and summer give the windows for washroom work.
Murston is about 1 mile east of Sittingbourne, in Kent. We cover commercial sites throughout Murston. Murston is one of 931 places in Kent on our list for washrooms and wet areas. Sites around London have their own page, about 38 miles away.
Work on washrooms and wet areas is covered throughout ME10 and ME9, whatever the building. Buildings on Oak Road, Glebe Lane and Leigh Road are within our area. Nearby places we also cover include Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). Bigger towns within reach include Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
Local landmarks in Murston
In Murston, that means premises near Sittingbourne Community College, Milton Creek Country Park and The New Inn. Murston’s nearest station is Sittingbourne station, roughly 0.7 miles west of the centre. Nearby you’ll also find Sittingbourne Heritage Museum (under half a mile west) and Bayford Court (under half a mile west).
How a job runs
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. Once we’re cleared to begin, we take the joints in the sequence agreed with you. Several jobs near Murston can be grouped on one trip. Tell us your site hours and we’ll plan around them.
- We agree which washrooms close and when.
- Leaks, loose panels or damp are pointed out first.
- Failed sealant and residue are stripped out.
- The right sanitary or food-safe sealant is applied.
- We give you a reopening time for every room.
Preparing the site
- Arrange parking or a loading space
- Move anything stored against the joints
- Tell us what induction or permit system the site runs
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
When to bring in a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.