Washroom Sealing in Cromdale
We carry out sealing in commercial washrooms, showers, kitchens and wet areas in Cromdale. Send photographs or drawings for a fixed quote.
- Open joints at the base of cubicle panels
- Discoloured joints around urinals and WC pans
- Washrooms that look worn because of the sealant
Washroom sealing in Cromdale
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our washroom sealing in Cromdale
Accessible toilets, shower rooms and changing rooms have joints that work harder than most: shower trays, wet-room floor edges, basins and floor-to-wall junctions. Gaps in those places let water get under the floor or behind panels so they get particular attention. Site teams most often ask us about shower tray joints that have opened up and failed sealant in a tea point or staff kitchen, across vanity units and basins, showers, trays and wet room floors and IPS panels and cubicles. For commercial sealant work in Cromdale, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Hotels and holiday accommodation in rural Scotland have busy and quiet seasons, so washroom work is often best planned for quieter months.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Cromdale (PH26)
- Wider area
- Highland
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Respect the cure time before reopening each room
- Squeegee showers and trays after busy periods
- Mention any site permits or estates rules at quote stage
- Include joints in routine washroom inspections
Any failure in our workmanship within the 12-month guarantee is ours to put right. After that, a routine look catches failing joints early.
Small numbers of failed joints are quick to phase in. Left until every washroom is affected, it becomes a bigger programme with more phasing to plan.
Common questions from Cromdale clients
Must every washroom in our Cromdale building shut while you work?
Usually only some of them, for a short time. We work in phases so other facilities stay open. Sanitary silicone needs time to cure before the area is used, and we will tell you how long for the product used.
Is a smaller place like Cromdale outside your area?
Not at all. Cromdale is within our area. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Which silicone is right for commercial washrooms?
An anti-mould sanitary silicone for most washroom joints. Neutral-cure grades are used where acetoxy types could mark metals, stone or mirror backings.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
Is old silicone taken out first?
The failed bead is always removed. New silicone won’t stick to the old so a bead over the top fails quickly.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Leaks through tanking or membranes below the finishes
- Water from plumbing, not from a joint
- Vanity carcasses that have swollen
Not sure which it is? You can speak to us on 01277 525 020 or email us and we’ll tell you honestly.
What we seal
- Showers, trays and wet room floors
- Vanity units and basins
- Kitchens and tea points
- Urinals and WCs
- Accessible toilets and changing rooms
- IPS panels and cubicles
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Cromdale, we aim for one trip, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- Every washroom is checked joint by joint, with loose panels, leaks or damp noted for the right trade.
- A phasing plan keeps part of the building’s facilities in use at all times.
- We strip out the old bead and clean off the residue left behind.
- Joints are cleaned, degreased and dried before sealing.
- New sanitary silicone with anti-mould additives goes in and is tooled neat.
- Each room is handed back once the sealant has had its cure time.
Preparing the site
- Let building users know which areas are affected
- Share the asbestos register for older buildings
- Flag any permit to work we will need
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, speak to us on 01277 525 020 or use the quote form.
Read more
What else we do in Cromdale
What affects the price in Cromdale
Your fixed quote is built from the real scope. It takes account of:
- Which sealant the job calls for
- Access and working height
- Quantities, in metres or numbers
- Whether old sealant has to be cut out first
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
Whether it’s one area or a whole building, the same details help:
- Clear photographs of the problem areas
- Your programme or deadline
- Drawings or a marked-up plan, if available
- The product your specification calls for
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Busy facilities in and around Cromdale
Cromdale is on Scotland’s drier eastern side. Drier weather outside doesn’t help a washroom with poor extraction, where mould gets into silicone fast.
Units at estates like Achnagonalin Industrial Estate (to the south-west of Cromdale) have welfare blocks whose showers and toilets see shift after shift. En suites at hotels like Haugh Hotel, less than half a mile north-east of Cromdale, are cleaned daily, which wears silicone over time. Staff changing rooms and patient toilets at places like Ian Charles Hospital (to the west of Cromdale) need cleanable, sound silicone.
Cromdale is about 19 miles south of Forres, in Highland. Commercial clients in Cromdale use us for work on washrooms and wet areas, as part of our coverage of Highland. Our Highland coverage takes in 256 places, large and small. For work in that direction, see our Aberdeen page (55 miles or so).
Postcode districts covered here: PH26 for washrooms and wet areas. We cover commercial and managed buildings on Auchroisk Road, Kirk Road and Auchroisk Place and the roads nearby. If your building is just outside Cromdale, we cover Grantown-on-Spey (3 miles west), Dulnain Bridge (5 miles south-west), Skye of Curr (6 miles south-west), Nethy Bridge (6 miles south-west) and Tormore (6 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or email drawings and photos.
What’s near Cromdale
Well-known places in the area include Ian Charles Community Hospital (2.3 miles west) and Grantown Museum (2.4 miles west).
Surface by surface
Wet-room floors and floor-to-wall joints
Floor edges in wet areas are where water most often escapes. Floor perimeters and sealant joints near drains are resealed.
Changing rooms and gyms
Showers, floor edges and vanity units in changing rooms all need sound sealant, and we survey them together.