Washroom Sealing contractors in Corran
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Corran. Send photos or drawings for a fixed quote.
- Discoloured joints around urinals and WC pans
- Failed sealant in a tea point or staff kitchen
- Sealant laid over old silicone and now peeling
Washroom sealing across Corran
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle washroom sealing in Corran
Not every silicone belongs in a washroom. Sanitary grades carry anti-mould additives, and neutral-cure types are used where acetoxy silicone could attack some metals, stone or mirror backings. In food areas, hygienic or food-safe sealants are used where food contact is possible. We work on IPS panels and cubicles, accessible toilets and changing rooms and urinals and WCs, and what we’re called in for most is sealant lifting along a tray edge and washrooms that look worn because of the sealant. For commercial sealant work in Corran, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For washroom work around Corran, we plan so every room on the list is done in one trip where possible. Send photographs and a room list and we’ll give a fixed quote.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Corran (PH33)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Keep washrooms out of use until we say the sealant has cured
- Tell us about infection-control or permit rules before we quote
- Don’t leave an open joint at a basin or tray
- Clean sealant with gentle products and a soft cloth
If a joint we sealed fails within 12 months, tell us and we will look at it. After that, a routine look catches failing joints early.
Mouldy sealant only gets harder to ignore and users notice. Dealing with it while it’s just the sealant keeps it simple.
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Fittings that move too much to hold a bead
- Mould caused by poor ventilation, which will return until the extract is fixed
- Swollen or delaminated boards behind panels or vanity tops
If you are not sure, just give us a call on 01277 525 020 or send photos by email and we will give you a straight answer.
Surfaces we seal
- Showers, trays and wet room floors
- IPS panels and cubicles
- Urinals and WCs
- Accessible toilets and changing rooms
- Vanity units and basins
- Kitchens and tea points
How a job runs
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For a building near Corran, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- We start by inspecting the fittings and joints and flagging problems sealant can’t solve.
- The phasing is agreed so there are always facilities open.
- Failed silicone is removed completely and the surfaces cleaned of every trace.
- Each joint is degreased and left dry, because silicone won’t bond to damp or soapy surfaces.
- We lay a sanitary silicone bead and tool it smooth so it is easy to clean.
- Rooms reopen after the product’s cure time, and we move to the next.
What we need from you
- Let building users know which areas are affected
- Share the asbestos register for older buildings
- Agree which areas must stay open
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Read more
Also near Corran
Also in Corran
Questions about Corran
Must every washroom in our Corran building shut while you work?
Not all at once. We take one block of facilities at a time. Sanitary silicone needs time to cure before the area is used, and we’ll tell you how long for the product used.
Is Corran too far out for you?
No. Places such as Corran are covered as much as the big towns. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
How do I request a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
How many days will you need on site?
It depends on the scope, though a typical visit typically takes between a morning and a week or so, set by the number of rooms and the phasing you need. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Different surfaces, different methods
Basins and vanity tops
A failed joint along a vanity unit lets water into the carcass. Prompt resealing keeps the unit sound.
Showers and trays
If a tray moves too much or is cracked, it needs attention first and we flag that beforehand.
Keeping Corran washrooms open while we work
Corran sits close to the coast, within about 1 mile, and seaside hospitality normally has a peak season that works washrooms hard. Heavy seasonal use is hard on shower and basin sealant, so we plan the work for quieter weeks where possible. Being in the west of Scotland, Corran gets more rain than eastern areas. Damp air means a poorly ventilated washroom rarely dries out fully, which is when mould gets into the sealant.
For a hall at a building such as Ardgour Parish Church, resealing the kitchen and toilets can be fitted between bookings. In any commercial washroom in or near Corran, mouldy sealant is cut out rather than cleaned, and anti-mould sanitary silicone goes on clean, dry joints.
Corran is in Highland. If you are looking for washroom sealing in Corran, we can help. Corran is one of 256 places in Highland on our list. For work in that direction, see our Glasgow page.
Anyone looking for washroom sealing in PH33 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your building is just outside Corran, we cover Clo Mhuillin (1 mile south-west), Inchree (1 mile east), Kentallen (3 miles south), Duror (5 miles south) and Ballachulish (5 miles south-east). Bigger towns within reach include Fort William (8 miles north-east), Caol (10 miles north-east), Inverlochy (9 miles north-east) and Kinlochmore (11 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Near you in Corran
The countryside around Corran includes Ardsheal Hill and Lochan na Luireach.
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Access and working height
- The total length or number of joints
- Location, for remote and island sites
- Whether old sealant has to be cut out first
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Whether an asbestos survey exists
- Specification clauses that apply
- The type of building and who uses it
- Anything awkward about access or site hours
For a fixed quote, phone 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.
Leave it or put it right?
Washrooms shape how visitors judge a building. Visitors notice black sealant before they notice much else. Resealing is a modest task with a very visible payoff. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Corran, a repair visit takes planning, so it’s better to act early.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Why us?
- Coloured sealants to suit the setting, where available
- Public liability insurance in place
- Old sealant cut out, never sealed over
- CSCS-carded applicators
See our cost guide or how we’re accredited.