Washroom Sealing contractors in Arlington
Sealing in commercial washrooms, showers, kitchens and wet areas throughout Arlington and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Failed sealant behind washroom basins
- Users noticing mouldy joints
- Sealant stained black around basins and showers
Washroom sealing in Arlington
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Loose panels, vanity units or tiles, which need fixing first
- Water escaping beneath the floor rather than through a joint
- A room that stays damp because ventilation isn’t working
If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think.
Joints and surfaces we work on
- Vanity units and basins
- IPS panels and cubicles
- Kitchens and tea points
- Showers, trays and wet room floors
- Urinals and WCs
- Accessible toilets and changing rooms
Washroom sealing in Arlington, done properly
Washroom joints need the right sealant, not whatever is to hand. Sanitary silicone contains additives that resist mould, and neutral-cure versions avoid the damage acetoxy types can do to some metals, stone and mirror backings. Where food contact is possible, we use a hygienic, food-safe grade. We work on accessible toilets and changing rooms, kitchens and tea points and urinals and WCs, and the failures we are asked to look at most are users noticing mouldy joints and failed sealant in a tea point or staff kitchen. A specialist sealant contractor works differently from a general builder: on jobs in Arlington, preparation and product choice get the time they need.
In and around smaller places like Arlington, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Mould gets into sealant in any washroom that doesn’t dry out, and once it’s in, the sealant is replaced.
A 12-month guarantee applies to all our work. Should something we installed fail, phone 01277 525 020 or send photos by email and we will come back to it.
- Where
- Arlington (BN26)
- Region
- East Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also near Arlington
More services for Arlington
Leave it or put it right?
Washrooms shape how visitors judge a building. Visitors notice black sealant even when the room is otherwise spotless. Fresh sanitary silicone lifts a room with very little disruption. Around Arlington, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we will quote for the lot.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Why clients in Arlington choose us
- Matching to RAL references, product permitting
- A range of standard colours, depending on the product
- One phone line for London, the South East and Scotland
- A Constructionline member, so easy to vet
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes a few hours for one toilet block, with bigger buildings phased across a number of visits, and our waste is bagged and taken away as we go. For a building around Arlington, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We survey each room, count the joints and note anything behind them that needs another trade.
- A phasing plan keeps part of the building’s facilities in use at all times.
- Failed silicone is removed completely and the surfaces cleaned of every trace.
- Joints are cleaned, degreased and dried before sealing.
- We lay a sanitary silicone bead and tool it smooth so it is easy to clean.
- You get a reopening time for every room, with signage left up until then.
Before we start on site
- Send asbestos survey details if the building is pre-2000
- Warn occupants and staff about the work
- Point out any areas we must not close
Request a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Read more
Your questions answered
Must every washroom in our Arlington building shut while you work?
Typically only some of them, for a short time. We work in phases so other facilities stay open. Sanitary silicone needs time to cure before the area is used, and we’ll tell you how long for the product used.
Would you work within a site like Hellingly Hospital Railway?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Do you work in hospitals, clinics and care homes?
We do. Your infection-control rules, estates requirements and permits are followed, and phase the work so areas keep facilities.
Is colour matching possible?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
How much does the work cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
How long does a typical visit take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Washroom sealing in Arlington: the local picture
Arlington lies roughly 47 miles out from central London, within the office belt around the capital. Office toilets in the commuter belt are in use from first arrivals to last departures, so we work a block of facilities at a time.
Office toilets at parks like Berwick Court Farm Business Park, 2.2 miles south-west of Arlington, take steady weekday use, and mouldy silicone soon shows. Clinical washrooms at sites like Hellingly Hospital Railway, 4.1 miles to the north-east of Arlington, are scheduled with the ward so the room is out of use for as little time as possible. Where you are responsible for a hall attached to a building such as The Parish Church of St Pancras, its kitchen and toilets need sealant that stays cleanable.
Arlington is about 3 miles south-west of Hailsham, in East Sussex. Our applicators travel to Arlington for work on washrooms and wet areas. Our East Sussex coverage takes in 308 places. Sites around Brighton have their own page, about 14 miles away.
We take on washrooms and wet areas across the BN26 postcode area, for business premises of every kind. We also cover Wickstreet (1 mile north), Berwick (1 mile west), Wilmington (2 miles south), Selmeston (2 miles west) and Milton Street (2 miles south). Bigger towns within reach include Eastbourne (6 miles south-east), Bexhill-on-Sea (12 miles east), Seaford (6 miles south-west), Lewes (8 miles west), Hailsham (3 miles north-east) and Crowborough (14 miles north).
Around Arlington
Recent enquiries here include premises near Yew Tree Inn. The nearest railway station is Berwick (Sussex) station, about 1.2 miles west. Nearby you’ll also find Agricultural Museum (2 miles south) and Hellingly Hospital Railway (4.1 miles north-east). Green spaces nearby include Combe Hill.
Work for main contractors and building owners
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Arlington. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
What sets the cost
What shapes the price:
- Access and working height
- Which sealant the job calls for
- Removal of failed or old sealant
- Joint width, depth and condition
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- The asbestos register, for older buildings
- Anything awkward about access or site hours
- Where the site is, with the postcode
- The product your specification calls for
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email us.
Keeping the joints sound
A few simple habits keep the new joints working:
- Keep washrooms out of use until we say the sealant has cured
- Brief cleaning staff to treat joints gently
- Inspect washroom sealant regularly
- Note failing joints building by building
Squeegeeing showers and trays after heavy use helps. Joints that sit wet for hours fail sooner.
A few failed joints can be resealed with hardly any disruption. Left until every washroom is affected, it becomes a bigger programme and more closures to manage.