Commercial Sealant Contractors in Potters Corner
Sealant work for offices, shops, hotels and other commercial buildings in Potters Corner and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- A top-up bead over failed sealant, now lifting
- Gaps behind commercial kitchen worktops and sinks
- Black mould through washroom sealant that won’t clean off
Commercial sealant contractors near Potters Corner
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work typically takes a few hours to several days on most single sites, depending on joint lengths and access. Smaller jobs around Potters Corner can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- Site photos, drawings or a visit tell us what’s there and how it has failed.
- A fixed quote follows, with removal and preparation included.
- We agree the order of work, access windows and site hours with you.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- We hand back each area with its cure time and our 12-month guarantee.
Getting the site ready
- Let building users know which areas are affected
- Share the asbestos register for older buildings
- Have the specification and drawings to hand
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or use the quote form.
Related advice
Sealant applicators in Potters Corner
Failed sealant isn’t always the whole story. A leak near a frame edge can start in the frame, the cill or the cavity, and repeated splits in a movement joint can mean the joint is too narrow for the movement. Part of the job is telling you when the fix is something other than sealant, so nobody pays for a reseal that can’t hold. Site teams most often ask us about damp patches where an external joint has failed and black mould through washroom sealant that won’t clean off, on kitchen worktops and splashbacks, window and door perimeters and floor and threshold joints. A specialist sealant contractor works differently from a general builder: in Potters Corner, that means joint design, primers and backing rod as standard.
Occupied buildings in Potters Corner need the work phased: we agree the order with you and hand back each area with its cure time.
Commercial sealant work around smaller places like Potters Corner tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Place
- Potters Corner (TN25, TN26)
- Region
- Kent
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Common problems we fix in Potters Corner
Resealing over the top is a false economy we come across often. New silicone has nothing to key into so it soon peels and traps moisture against the joint. By the time it shows, there can be two or three layers to cut out.
Common reasons buildings call us in:
- Greasy, split joints in a kitchen or tea point
- Earlier reseals applied straight onto the failed bead
- Damp patches where an external joint has failed
- Movement joints packed with grit and debris
On a business park such as Eurogate Business Park, 0.9 miles to the south-east of Potters Corner, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters.
What to look for in a quote
- What the guarantee covers, and for how long
- Whether primer will be used where the manufacturer specifies it
- Their plan for phasing and protecting the area
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
How the quote is worked out
We price every job individually. The things that drive the figure:
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
- Backing rod, priming and other preparation
- Any access equipment needed
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you are ready.
Details that help us quote
However big the job, the same details help:
- Where the site is, with the postcode
- Asbestos survey details if the building is older
- Clear photos of the problem areas
- Any specification or named product
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Questions about Potters Corner
Do you cover business parks and estates near Potters Corner, such as Eurogate Business Park?
Yes, sites like Eurogate Business Park are within our area, along with the rest of Potters Corner. A few photographs and the unit address let us price the work.
Is Potters Corner too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Can areas stay open during the work?
Most of the buildings we work in stay occupied. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing.
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Is it OK to apply fresh sealant over existing beads?
Removal of the failed sealant is always part of the job. Laying new silicone on old gives it nothing to grip, and the faces are brought back to sound, dry material before resealing.
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
What sealant work can’t fix
We check first that sealant really is the fix. It isn’t the answer for:
- Suspect materials that need testing and specialist removal
- A failed roof covering or waterproofing membrane
- Structural cracks or movement the joints weren’t designed for
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we will tell you honestly before you book.
What we seal
- Kitchen worktops and splashbacks
- Movement joints in walls and floors
- Window and door perimeters
- External facade joints
- Washrooms and tea points
- Floor and threshold joints
Commercial premises in Potters Corner
The 3 miles around Potters Corner take in at least three named trading estates, business parks or retail parks. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints. Potters Corner is about 47 miles from central London. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings.
Refits at hotels like Ashford International Hotel (to the south-east of Potters Corner) bring joints at vanity tops, bars and reception desks that guests see every day. Occupiers with premises at both Eurogate Business Park and Warren Retail Park could have the sealant at each handled under one quote.
Potters Corner is about 2 miles north of Ashford, in Kent. We send applicators to Potters Corner for sealant joints, handled exactly as we handle every other area. Potters Corner is one of 931 places in Kent on our list for sealant joints. Sites around London have their own page, roughly 47 miles from Potters Corner.
We take on sealant joints across the TN25 and TN26 postcode area, whatever the building. For a building on Kingsland Lane, Sandyhurst Lane and Westwell Lane or nearby, we can quote for sealant joints. Close to Potters Corner, our area also takes in Bockhanger (1 mile south-east), Godinton (1 mile south), Westwell (1 mile north), Hothfield (1 mile west) and Kennington (1 mile east). A short drive away, we cover Canterbury (12 miles north-east), Sittingbourne (13 miles north-west), Folkestone (15 miles south-east), Whitstable (15 miles north-east), Faversham (10 miles north) and Hythe (12 miles south-east).
Landmarks near Potters Corner
We work on buildings around Ashford Warren and Hoads Wood, Towers School and Sixth Form Centre and The Hayesbrook School and the streets around them. For rail, the closest station is Ashford International station, about 2.2 miles south-east of the centre. Other landmarks nearby include County Square (1.8 miles south-east) and William Harvey Hospital (3.4 miles south-east). The countryside around Potters Corner includes Hatch Park.