Highland · Scotland
Commercial sealant contractors in PA80
We cover every part of the PA80 postcode district, which takes in Lochaline. Failed sealant is always cut out completely, with a 12-month guarantee.
Sealant work in PA80
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Towns and villages in PA80
What we do in PA80
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Construction and new-build mastic
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Every service
Tell us what needs doing and your postcode for a fixed quote: call the office on 01277 525 020 or email drawings and photos.
Nearby postcode districts
More in Highland
Towns and villages in Highland
All areas
How commercial sealant contractors works in PA80
If you look after more than one building, a single sealant contractor saves a lot of chasing. Single jobs, multi-site packages and planned programmes all come to us, run the same way on every site: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. For sites in PA80, the quickest start is to give us a call on 01277 525 020 or send photos by email with a list of addresses. Most enquiries involve greasy, split joints in a kitchen or tea point and damp patches where an external joint has failed, across kitchen worktops and splashbacks, window and door perimeters and floor and threshold joints.
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, with the work itself normally taking a few hours for one area, or a planned series of visits across a bigger building.
- Send details through our quote form, or ask for a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Where parts of the building must stay open, the work is phased.
- Every failed bead is removed rather than covered.
- A suitable product for each joint goes in at the right depth and is tooled.
- We check the work with you, and the 12-month guarantee starts.
What you’ll pay
A quote for sealant joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why clients in PA80 choose us
- Health and safety: CHAS accredited
- Joints cleaned back to sound surfaces
- Fixed quotes based on photos, drawings or a visit
- Matching to RAL references, product permitting
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Local landmarks in Lochaline
Locally, jobs take us to sites close to Kiel Church, among other places. Well-known places in the area include Ardtornish Castle (1.7 miles south-east) and Mull and Iona Community Hospital (4.8 miles south-east). For a walk, there’s Lochan Lub an Arbhair.
Commercial premises across PA80
The commercial stock in PA80 mixes older town-centre buildings with newer offices and units, in places such as Lochaline and beyond. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
Across PA80, outside sealant work is planned around the weather, so we keep some flexibility in the dates.
Lochaline: A hotel such as Lochaline Hotel (to the south of Lochaline) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. For any commercial premises in Lochaline, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Why act early?
Some low prices are low because nothing gets cut out. Sealing over looks tidy at handover, then lifts once the joint starts moving. Our prices always include removal of the failed bead and full joint preparation.
Comparing quotes
- Their approach to joint depth and backing
- Whether primer will be used where the manufacturer specifies it
- How they handle RAMS and site documents
- Whether their applicators hold CSCS cards
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Keeping the joints sound
After handover, these steps help:
- Keep a record of which joints were resealed and when
- Check the asbestos register before anyone disturbs old sealant in an older building
- Have extract fans checked so wet areas dry out
- Respect the cure time before reopening an area
Good ventilation keeps wet-area sealant in better condition. Extraction that isn’t working keeps the joints wet, and mould follows damp. It’s worth having fans checked while the sealant is fresh.
A failed external joint lets water in every time it rains. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
When something else is needed
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Walls or slabs moving more than any sealant can take
- Broken glass or blown double-glazed units
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
FAQs: PA80
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Is it OK to apply fresh sealant over existing beads?
The old bead is stripped out first. After that come cleaning, primer where needed, backing and the new sealant.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Are you CHAS accredited?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Could the old sealant in an older building contain asbestos?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. Before cutting anything out, we ask for the asbestos register or survey, and if something is suspected, work stops until it’s tested.
Do you cover PA80?
Yes. PA80 falls within our area, and the simplest way to start is to phone 01277 525 020 or send details through our quote form.
How long does a job like this take?
It depends on the scope, but the work normally takes anything from part of a day on a short run of joints to several weeks on a large phased package. For bigger or phased jobs, we will set out a timescale with the quote.