Mastic sealing for building owners and managing agents in Shiel Bridge, Highland
Mastic sealing in Shiel Bridge, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old repairs sealed over failed mastic
- Draughts at frames across a block
- Estate-wide sealant that is simply worn out
Mastic sealing for Shiel Bridge sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For work around Shiel Bridge, we aim for one trip, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- A building-by-building inspection lists the failed joints.
- The quote is fixed and split as suits you.
- Dates and areas are agreed so occupiers can be told.
- Failed sealant is removed and the faces prepared.
- Joints are resealed and tooled.
- Each building is checked and signed off with the 12-month guarantee.
Before we start on site
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
Getting a fixed quote
To get a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
How we handle mastic sealing in Shiel Bridge
Blocks are lived in, so access and disruption have to be thought through. Dates, areas and the order of work are agreed with you in advance, giving you what you need to notify residents. Entrances and stairwells are kept in use while we work. If you’re dealing with brittle perimeter mastic across a building and communal area joints that look neglected, we can help. Whoever orders the work in Shiel Bridge, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Outside mastic in Scotland needs dry joints and the right temperature, so work around Shiel Bridge is planned with the forecast. We agree a window with some flexibility.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Shiel Bridge (IV40)
- Region
- Highland
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Your questions answered
Can you quote for mastic across several buildings in and around Shiel Bridge?
Yes. Portfolio-wide programmes are a regular request. Send the addresses and photos and we’ll give a fixed quote.
Is a smaller place like Shiel Bridge outside your area?
No. Places such as Shiel Bridge are covered as much as the big towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
Is mastic sealing guaranteed?
There is a 12-month guarantee on our workmanship and we hold public liability insurance.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Can you take on resealing for a block portfolio?
Yes. Most of our mastic sealing is for agents, factors, housing associations and portfolio landlords, and we quote building by building or as a programme.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can weather delay the job?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Towns and villages near Shiel Bridge
More services for Shiel Bridge
What sets the cost
The price varies from site to site. Expect it to depend on:
- How much there is to seal
- Backing rod, priming and other preparation
- The site’s rules and procedures
- Location, for remote and island sites
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
- The asbestos register, for older buildings
- Access details, including height
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
When something else is needed
We check first that sealant really is the fix. It won’t put right:
- Cracked or crumbling render, brick or stone at the joint edges (we’ll tell you if so)
- Asbestos-containing sealant, which we don’t remove
- Roof leaks, gutters or failed flashings that aren’t sealant joints
If you are not sure, just give us a call on 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.
Surfaces we seal
- External wall and movement joints
- Balcony and threshold joints
- Communal entrances and stairwells
- Shopfronts below residential blocks
- Communal kitchens and washrooms
- Window and door perimeters on blocks
Leave it or put it right?
Resealing ahead of leaks keeps it to a maintenance task. Once water has tracked in, the repair list grows and occupiers notice. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Our applicators hold CSCS cards
- Workmanship guaranteed for 12 months
- Coloured sealants to suit the setting, where available
- Colour options checked against the specified product
Read what affects the cost or our accreditations and insurance.
Blocks and managed buildings in Shiel Bridge
With the shore within about 1 mile, Shiel Bridge counts as a coastal location. For owners and agents with buildings near the sea, exposed elevations are where frame mastic fails first; plan inspections around that. Shiel Bridge is on Scotland’s wetter western side. Frame mastic on weather-facing sides tends to fail first. We plan block programmes with the forecast in mind.
Wherever your building is in or near Shiel Bridge, we look at the whole elevation before quoting, so you know what needs doing now. Around Shiel Bridge, a planned programme renews failed mastic across a building or estate in one go.
Shiel Bridge is in Highland. We send applicators to Shiel Bridge for mastic joints. Our Highland coverage takes in 256 places.
Commercial sites across IV40 are covered. Just outside Shiel Bridge, we also work in Inverinate (2 miles north), Dornie (6 miles north-west), Carndu (6 miles north-west), Bundalloch (6 miles north-west) and Glen More (6 miles west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
What’s near Shiel Bridge
Not far away are Sgùrr an t-Searraich and Loch Shiel.
Looking after the joints
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Keep a record of when each building was resealed
- Make mastic part of routine maintenance checks
- Protect low-level joints in entrances
- Mention RAMS, insurance or CSCS requirements up front
Keep records of when each building was resealed. It helps plan the next round and gives you a history.
Failed mastic often goes unnoticed until heavy rain finds it. Resealing when cracking first shows avoids water damage and the complaints that come with it.