Mastic sealant contractors in Murcott
Mastic sealing for building owners, managing agents and housing associations throughout Murcott and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Cracked, hardened mastic round windows on a block
- Water getting in round frames after rain
- Failed external movement joints
Mastic sealing for businesses in Murcott
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our mastic sealing in Murcott
For blocks and buildings in Murcott and across Oxfordshire, the process is the same: you send details, we return a fixed quote, the joints are resealed and the 12-month guarantee follows. A list of buildings, a few photographs and approximate joint numbers are enough for a quick quote or we can visit. We work on communal kitchens and washrooms, balcony and threshold joints and external wall and movement joints, and what we’re called in for most is draughts at frames across a block and old repairs sealed over failed mastic. Whoever orders the work in Murcott, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places like Murcott, older walls fitted with newer windows are a familiar sight. Perimeter mastic there has to grip an uneven face and suit the building’s character.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Murcott (OX5)
- Region
- Oxfordshire
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Make it easy for occupiers to report draughts
- Protect low-level joints in entrances
- Avoid piecemeal callouts where you can
- Have the asbestos survey to hand for older buildings
Log the date and extent of the resealing for each block. It helps plan the next round and gives you a history.
Mastic fails gradually, then all at once in a wet spell. Acting at the first signs keeps it a straightforward reseal and saves internal repairs.
Towns and villages near Murcott
Also in Murcott
Quoting for work in Murcott
A fixed quote reflects the actual work. It takes account of:
- Phasing around occupants
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- Access and working height
The specified product makes a difference, and so does the preparation. Access, phasing and site requirements come into it too.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- Any specification or named product
- Any dates the work must fit around
- The site address and postcode
- A wide shot and a close-up of the area
For a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
For owners and agents in Murcott
Rainfall across the South East, Murcott included, is lower than in many parts of the UK. Outside mastic still needs a dry joint and the right temperature, and the sunniest, most exposed sides of a building typically need attention first. Murcott is about 51 miles from central London. Within reach of London, blocks run by agents and associations are common around stations.
Historic properties like Boarstall Tower, 2.7 miles to the east of Murcott, show the age of some local stock, where frame mastic must suit soft brick or stone. Buildings close to stations like Islip station, 3.7 miles west of Murcott, are often flats over shops, with frame mastic to keep sound.
Murcott is about 4 miles south of Bicester, in Oxfordshire. If you’re looking for mastic sealing in Murcott, we can help, as we do across Oxfordshire. Across Oxfordshire, 423 places are covered, including Murcott. We also cover Oxford, some 7 miles away.
We take on mastic joints across the OX5 postcode area, whatever the building. Just outside Murcott, we also work in Fencott (1 mile north-west), Merton (1 mile north-west), Charlton-on-Otmoor (1 mile west), Upper Arncott (2 miles north-east) and Lower Arncott (2 miles north-east). Further afield, our area takes in Oxford (7 miles south-west), Bicester (4 miles north), Abingdon-on-Thames (12 miles south-west), Witney (15 miles west), Thame (10 miles south-east) and Kidlington (6 miles west).
Local landmarks in Murcott
Murcott’s nearest station is Islip station, about 3.7 miles west of the centre. Nearby you will also find Bicester Community Hospital (4.1 miles north) and Bicester Avenue (3.5 miles north). For a walk, there’s Otmoor RSPB reserve and Graven Hill.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Murcott can form part of a wider programme across Oxfordshire.
How the job changes by surface
Window and door perimeters on blocks
Blocks have a mix of frame materials, so the grade we pick has to bond to frame and wall alike. Colours are confirmed for the product used.
Tenement and older buildings
Older mastic can contain asbestos, so we check the asbestos register or survey first. If it’s suspected, work stops until it’s tested.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs in and around smaller places like Murcott are usually planned as a single visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- We inspect the joints, building by building, and record what has failed and why.
- You get a fixed quote, priced per building where that helps your budgeting.
- The programme is fixed with you, including dates you can pass on to residents or tenants.
- We remove the old mastic completely and clean the joint faces back.
- Backing rod and primer go in where the joint and the product need them, then new sealant is applied and tooled.
- Completed joints are inspected and carry a 12-month workmanship guarantee.
Before we start on site
- Warn occupants and staff about the work
- Clear stock, furniture or equipment away from the joints
- For older buildings, check the asbestos register before work
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Advice
Common questions from Murcott clients
Can one quote cover a number of our buildings near Murcott?
Yes. Planned programmes across a building, block or estate are a core part of this service. Send the addresses and photos and we will give a fixed quote.
Do you work for managing agents with blocks near Islip station?
Yes. Blocks of any size are within what we do. We work to your notice and access arrangements.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How many days will you need on site?
That varies with the scale of the job, though a typical visit typically takes a day or two for a single block, longer for an estate programme. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.