How Wood mastic sealing
Planning work on a mastic joint in How Wood? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Damaged joints in communal entrances and corridors
- Failed external movement joints
- Damp patches beside frames
Need mastic sealing in How Wood?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Mastic sealing in How Wood
Before work starts, most agents and landlords want the documents in order. For documents, tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote. We are CHAS accredited and a Constructionline member, with public liability insurance. If you have movement joints with sealant missing and communal area joints that look neglected, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, in How Wood it comes down to the same thing: the right product in a properly prepared joint.
Owners with buildings around smaller places like How Wood often group mastic work so one visit covers several properties. One quote can cover a whole list of addresses.
Every job we finish is backed by a 12-month workmanship guarantee, in How Wood as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- How Wood (AL2)
- Wider area
- Hertfordshire
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Looking after buildings in and around How Wood
The South East is one of the drier parts of the UK. Even so, frame mastic only goes on in dry, workable conditions, and elevations facing the sun and the prevailing weather are normally where frame mastic ages first. How Wood has three care or nursing homes no more than 2 miles away. Care home owners need frame and external mastic kept sound without unsettling residents.
For owners of several units at places like North Orbital Commercial Park, 1.8 miles north-east of How Wood, one programme can deal with frame and external mastic across the lot. Churches, halls and community buildings such as Church of the Holy Trinity are looked after by trustees and committees like any other owner, and their frames, doors and external joints need mastic renewed in time. Buildings close to stations like How Wood station (under half a mile east of How Wood) are often flats over shops, with frame mastic to keep sound.
How Wood is about 2 miles south-west of St Albans, in Hertfordshire. Looking for mastic sealing in How Wood? We can help. Across Hertfordshire, 371 places are covered, How Wood among them. Sites around London have their own page, about 19 miles away.
Postcode districts covered here: AL2 for mastic joints. Among the streets we cover are Ringway Road, Alder Close and How Wood. Sites close to How Wood are covered too, including Park Street (1 mile north-east), Chiswell Green (1 mile north-west), Frogmore (1 mile east), Bricket Wood (1 mile south-west) and Colney Street (1 mile south-east). Bigger towns within reach include Watford (4 miles south-west), Hemel Hempstead (5 miles north-west), Stevenage (15 miles north-east), Welwyn Garden City (9 miles north-east), Harpenden (7 miles north) and Hoddesdon (15 miles east).
Around How Wood
In How Wood, that means premises near Marlborough Science Academy and The Falcon pub and the streets around them. There’s a railway station in How Wood itself: How Wood station. Nearby you will also find Hilfield Castle (4.6 miles south) and Hypocaust Museum (2.1 miles north). Green spaces nearby include Broad Colney Lakes and Verulamium Lake.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. What matters most for a job in How Wood is a clear list of what needs doing, so send photos of each area. You’ll then get a fixed price for the work.
- A building-by-building inspection lists the failed joints.
- You get a fixed quote, per block or for the whole programme.
- We agree the programme and dates with you.
- Failed sealant is removed and the faces prepared.
- Joints are resealed and tooled.
- We check the finished work and confirm the guarantee.
Getting the site ready
- Make sure the joints can be reached
- Send your site hours and access windows
- Tell us what induction or permit system the site runs
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or email drawings and photos.
Read more
What the job involves on each surface
Window and door perimeters on blocks
On most blocks, the frame-to-wall joint is where failure shows first. We remove the failed mastic, prepare the faces, add backing rod if the joint is deep and reseal.
Tenement and older buildings
Stone needs a neutral-cure product, so we pick a grade that won’t mark it.
Honest limits
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Leaks through the frame itself rather than the perimeter
- Masonry that has broken away beside the joint
- Misted or failed double-glazed units
If you are not sure, just call the office on 01277 525 020 or email us and we’ll give you a straight answer before you book.
Surfaces we seal
- Communal entrances and stairwells
- Communal kitchens and washrooms
- Window and door perimeters on blocks
- Shopfronts below residential blocks
- External wall and movement joints
- Balcony and threshold joints
Why it’s worth doing now in How Wood
Reacting to every complaint means sending someone out block by block. Planned resealing covers a whole building or estate in one go and is simpler to manage and budget. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.
There’s no price list, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Why choose Mastic Doctor in How Wood
- Health and safety: CHAS accredited
- Colour options checked against the specified product
- Work to your specification and the manufacturer’s guidance
- Public liability insurance in place
See what affects the cost and our accreditations and insurance.
How the quote is worked out
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Removal of failed or old sealant
- Distance, for remote addresses
- Backing rod, priming and other preparation
- How much there is to seal
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What to include in your enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- Anything awkward about access or site hours
- Where the site is, with the postcode
- What the building is and how it’s used
- Any dates the work must fit around
To get a fixed quote, call the office on 01277 525 020 or email drawings and photos. You can also send details through our quote form.
Nearby places to How Wood
More services for How Wood
Should maintenance staff do it?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Questions about How Wood
Can work in a care setting near How Wood go ahead while residents are there?
Yes. Care settings are planned area by area, at times agreed with the home. Any site rules, from signing in to infection control, are agreed before we start.
Is a smaller place like How Wood outside your area?
No. Places such as How Wood are covered as much as the big towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Can you take on resealing for a block portfolio?
Yes, block and estate work is a core part of what we do. We work through buildings in a planned order with dates agreed in advance.