
Mastic Sealing in Hare Street
Mastic sealing for building owners, managing agents and housing associations throughout Hare Street and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Brittle perimeter mastic across a building
- No planned programme for sealant
- Damp patches beside frames
Need mastic sealing in Hare Street?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
FAQs: Hare Street
Does your area include sites such as Hallsford Bridge Industrial Estate, near Hare Street?
Yes. Our area takes in Hare Street and its surroundings, with estates and business parks such as Hallsford Bridge Industrial Estate included. To start, just give us a call on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Can you quote for mastic across several buildings in and around Hare Street?
Yes, we quote for single buildings and for programmes across several blocks. Residents are given notice through you, and the work moves building by building.
What if the old mastic contains asbestos?
Some mastics in pre-2000 buildings contain asbestos. We ask for the asbestos register or survey before work starts, and if it’s suspected, work stops until it’s tested.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Do you work for managing agents and housing associations?
Yes. Managing agents, property factors in Scotland, housing associations and landlords with block or commercial portfolios are our main clients for this work and work can be quoted per building or as a whole.
What paperwork can you provide?
Our credentials include CHAS, Constructionline and public liability insurance. Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
What guarantee do you give on resealing?
Our workmanship carries a 12-month guarantee and we hold public liability insurance.
Mastic sealing in Hare Street, done properly
We diagnose before we prescribe: what has failed, what caused it and whether new sealant will actually solve it. Old mastic is removed entirely, the faces prepared, primer used where the maker specifies it and new sealant tooled in, with backing rod setting the depth where it’s needed. If you have estate-wide sealant that is simply worn out and old repairs sealed over failed mastic, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Hare Street, that means joint design, primers and backing rod as standard.
Owners and agents with buildings around smaller places such as Hare Street tend to manage small terraces of association properties, converted barns and commercial units. Mastic around frames and on external joints wears out in time, whatever the building.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or email us and we’ll come back to it.
- Place
- Hare Street (CM5)
- Region
- Essex
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026

Places near Hare Street
Also in Hare Street
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Induction, permit and paperwork requirements
- Distance, for remote addresses
- The total length or number of joints
- Whether the work must be split into stages
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Asbestos survey details if the building is older
- Approximate linear metres or a joint schedule
- The product your specification calls for
- Whether the building will be occupied during the work
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or send details through our quote form.
Owners, agents and contractors
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Hare Street. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Surface by surface
Commercial and mixed-use buildings
Where retail and residential share a building the programme has to suit everyone. Tell us your site hours and access windows and we will plan around them.
External movement joints
External movement joints take up expansion and contraction. Once that sealant goes, rain can reach the wall.
What we are called out for in Hare Street
Poor preparation explains many failed joints. Where the faces weren’t cleaned or primed as specified, the bead peels off one side.
If one of these sounds familiar, it’s time for a closer look:
- Window mastic that has split and shrunk
- Water getting in round frames after rain
- Occupiers reporting cold air round windows
- Failed external movement joints
For owners of several units at places like Hallsford Bridge Industrial Estate, 1.9 miles to the north-east of Hare Street, one programme can deal with frame and external mastic across the lot.
Comparing quotes
- Will CSCS-carded applicators be on site?
- How the joint faces will be prepared and primed
- The terms of the workmanship guarantee
- Whether old or failed sealant will be cut out, not overlaid
Looking after buildings in and around Hare Street
Rainfall across the South East, Hare Street included, is lower than in many parts of the UK. Outside mastic still needs a dry joint and the right temperature, and the sunniest, most exposed sides of a building usually need attention first. Central London is about 18 miles from Hare Street. Around the capital’s commuter belt, managing agents look after many blocks close to stations and town centres; their frame mastic often ages block-wide.
Churches, halls and community buildings such as Church of St Margaret of Antioch are looked after by trustees and committees like any other owner, and their frames, doors and external joints need mastic renewed in time. Older buildings near Hare Street, from historic houses such as Hill Hall (to the west of Hare Street) to more modest stock, need compatible products when frames are resealed.
Hare Street is about 5 miles north-west of Brentwood, in Essex. We cover Hare Street, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Essex coverage takes in 644 places, large and small. For work in that direction, see our London page (18 miles or so).
If you need mastic sealing in CM5, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Just outside Hare Street, we also work in Little End (1 mile north-east), Stanford Rivers (1 mile north), Clatterford End (1 mile north-west), Marden Ash (2 miles north-east) and Navestock Heath (2 miles south). Bigger towns within reach include Chelmsford (12 miles east), Basildon (13 miles south-east), Harlow (8 miles north-west), Brentwood (5 miles south-east), Billericay (9 miles east) and Loughton (7 miles west).
Near you in Hare Street
In Hare Street, that means premises near The Woodman Public House and the streets around them. Nearby you’ll also find St. Margaret's Hospital (4.6 miles north-west). Not far away are Gernon Bushes.
On site: what to expect
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. Smaller jobs around Hare Street can be grouped with others nearby. A fixed quote is given before anything starts.
- A building-by-building inspection lists the failed joints.
- You get a fixed quote, per block or for the whole programme.
- Dates and areas are agreed so occupiers can be told.
- Failed sealant is removed and the faces prepared.
- New sealant goes in with backing rod and primer where needed.
- Each building is checked and signed off with the 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- Explain the parking and delivery arrangements
- Confirm the product named in the specification
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or send details through our quote form if you’d rather talk the job through.