The Mastic Doctor team standing beside their branded vans outside an office building
West Berkshire · England

Mastic Sealing in Great Shefford

Sealant work in Great Shefford for main contractors, managing agents and facilities managers: mastic sealing for building owners, managing agents and housing associations, with a fixed quote first.

  • Worn sealant at communal door frames
  • Estate-wide sealant that is simply worn out
  • No planned programme for sealant
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Mastic sealing in Great Shefford

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

About our mastic sealing in Great Shefford

There isn’t one mastic for every joint on a building. Window perimeters and external joints often take a low-modulus neutral-cure silicone, while hybrid polymer sealants grip many materials and are often paintable, and colours are confirmed for whichever product is used. Site teams most often ask us about cracked, hardened mastic round windows on a block and a mix of products and colours from past repairs, across window and door perimeters on blocks, communal entrances and stairwells and shopfronts below residential blocks. A specialist sealant contractor works differently from a general builder: on jobs in Great Shefford, preparation and product choice get the time they need.

Owners and agents with buildings around smaller places such as Great Shefford tend to manage small terraces of association properties, converted barns and commercial units. Frame and wall-joint mastic on all of them ages and hardens.

A 12-month guarantee applies to all our work in West Berkshire. Should something we installed fail, give us a call on 01277 525 020 or use the quote form and we will come back to it.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Great Shefford (RG17)
Region
West Berkshire
Guarantee
A 12-month guarantee
Quotes
A fixed quote before we start
Telephone
01277 525 020
Last updated
3 November 2026

For owners and agents in Great Shefford

At about 58 miles from central London, Great Shefford is within reach of the capital. Within reach of London, blocks run by agents and associations are common around stations. Great Shefford is in the South East, one of the UK’s drier regions. Even so, frame mastic only goes on in dry, workable conditions, while the elevations that take the most sun tend to show hardened mastic first.

For a school such as Shefford C.E. Primary School, perimeter mastic on windows and doors is a holiday job. Older community buildings, Church of St Mary among them, often have frames of mixed ages whose mastic varies.

Great Shefford is about 8 miles north-west of Newbury, in West Berkshire. Our applicators travel to Great Shefford for work on mastic joints, handled exactly as we handle every other area. We work across 140 places in West Berkshire, large and small. There’s a separate page for Reading, about 20 miles away.

Postcode districts covered here: RG17 for mastic joints. Among the streets we cover are Station Road, The Mead and Miller's Field. We also cover East Shefford (1 mile south-east), Weston (1 mile south-east), East Garston (2 miles north-west), Shefford Woodlands (2 miles south-west) and East Garston Woodlands (2 miles west). A short drive away, we cover Newbury (8 miles south-east), Thatcham (10 miles south-east), Speenhamland (7 miles south-east), Hungerford (5 miles south-west), Lambourn (4 miles north-west) and Shaw (7 miles south-east).

Landmarks near Great Shefford

Not far away are Sole Common Pond.

Map of Great Shefford © OpenStreetMap contributors

Site staff or a sealant specialist?

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.

Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.

Work for main contractors and building owners

Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.

When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.

From enquiry to sign-off

We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs in and around smaller places like Great Shefford are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.

  1. We check the asbestos register for older buildings and look at the joints.
  2. A fixed quote covers the joints, products and order of work.
  3. We strip out the old sealant.
  4. The joints are prepared and resealed with the right product.
  5. We finish each building before moving to the next.

What we need from you

  • Send any specification or drawings in advance
  • Share the asbestos register for older buildings
  • Tell staff and tenants when we will be in

Request a quote

To get a fixed quote, call 01277 525 020 or email the details over. Our quote form is another easy route.

Ask for a quote

Read more

Aftercare for building managers

For the best life from the joints:

  • Check the asbestos register before any old mastic is disturbed
  • Reduce knocks to communal area joints
  • List the paperwork your organisation requires when you send details
  • Include mastic in your cyclical inspections

Encourage occupiers to report water or draughts at frames. A quick report keeps a small repair small.

Left open, joint edges in render, brick or frames can deteriorate. Once that happens, repairs come before resealing.

What sets the cost

These are the things that shape the price:

  • Distance, for remote addresses
  • Joint width, depth and condition
  • The product specified
  • Removal of failed or old sealant

Pricing mastic joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.

Sending details for a quote

A few photos plus some basic facts will normally do. It helps to include:

  • Any dates the work must fit around
  • Whether an asbestos survey exists
  • Specification clauses that apply
  • Photos of the joints, close up and from further back

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Great Shefford: questions and answers

Which documents can you supply for work in Great Shefford?

Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.

Can you quote for mastic across several buildings in and around Great Shefford?

Yes, we quote for single buildings and for programmes across several blocks. Send the addresses and photographs and we’ll give a fixed quote.

Will you just go over the old sealant?

No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.

How soon can the area be used again?

That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.

Does weather matter for sealant work?

It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.

How do you choose the sealant?

If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.

Do you work to architects’ specifications?

Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.

Surface by surface

Estate-wide resealing programmes

An estate of similar buildings suits a rolling programme. We quote building by building and work through them in turn.

Window and door perimeters on blocks

Frames vary from uPVC to aluminium and timber, and the product is matched to the frame material and the masonry. We will confirm the colours available for the specified product.

Accreditations

Trusted. Accredited. Insured.