Foxcotte mastic sealing
Commercial sealant work in Foxcotte for contractors, FMs and building owners: mastic sealing for building owners, managing agents and housing associations, with a fixed quote first.
- A mix of products and colours from past repairs
- Leaks at window and door perimeters
- Draught complaints from residents or tenants
Mastic sealing near Foxcotte
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Different surfaces, different methods
Commercial and mixed-use buildings
Commercial occupiers normally stay open during the work, so we plan around them.
Tenement and older buildings
Older mastic can contain asbestos and the register is checked before anything is disturbed. If it’s suspected, work stops until it’s tested.
About our mastic sealing in Foxcotte
We diagnose before we prescribe: which joints have failed, why, and whether sealant is the right answer. Failed mastic is stripped, the faces taken back to sound material, primed where the manufacturer specifies and resealed and backing rod used wherever a joint is deep. Site teams most often ask us about cracked, hardened mastic round windows on a block and water getting in round frames after rain, across communal entrances and stairwells, shopfronts below residential blocks and external wall and movement joints. Facilities teams, main contractors and managing agents in Foxcotte tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For owners with a single building near Foxcotte, we plan to finish in one visit where possible. Photos of each elevation help us quote accurately.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Foxcotte (SP10)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Places near Foxcotte
Other services in Foxcotte
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. For a building around Foxcotte, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- A building-by-building inspection lists the failed joints.
- You get a fixed quote, per block or for the whole programme.
- We agree the programme and dates with you.
- Failed sealant is removed and the faces prepared.
- New sealant goes in with backing rod and primer where needed.
- We check the finished work and confirm the guarantee.
Preparing the site
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
- Send any specification or drawings in advance
Request a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, phone 01277 525 020 or email us.
Advice
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is one of these:
- Roof leaks, gutters or failed flashings that aren’t sealant joints
- Old mastic suspected of containing asbestos, which must be tested and dealt with by a specialist first
- Cracked or crumbling render, brick or stone at the joint edges (we’ll tell you if so)
If you are not sure, just speak to us on 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Communal entrances and stairwells
- Balcony and threshold joints
- Communal kitchens and washrooms
- External wall and movement joints
- Window and door perimeters on blocks
- Shopfronts below residential blocks
Quoting for work in Foxcotte
The price varies from site to site. Expect it to depend on:
- Joint width, depth and condition
- How accessible the joints are
- Induction, permit and paperwork requirements
- Location, for remote and island sites
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Sending details for a quote
A few photographs plus some basic facts will normally do. Please tell us:
- Rough lengths or quantities, or drawings if you have them
- The postcode of the building
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or email a schedule or drawings.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
Should maintenance staff do it?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Mastic sealing around Foxcotte: how the place shapes the job
Foxcotte sits in one of the drier corners of the country, the South East. Outside work still depends on dry joints, and the sunniest, most exposed sides of a building usually need attention first. Foxcotte lies roughly 64 miles out from central London. Commuter-belt towns tend to have plenty of managed blocks near stations and town centres; their frame mastic often ages block-wide.
Schools and community buildings such as Harrow Way Community School need frame and external mastic kept sound like any building. Older community buildings, St Thomas among them, often have frames of mixed ages whose mastic varies. Landlords with units on estates such as Portway Industrial Estate (0.8 miles south of Foxcotte) can bring frame, door and external mastic across several units into one programme.
Foxcotte is about 2 miles north-west of Andover, in Hampshire. We send applicators to Foxcotte for mastic joints. Foxcotte is one of 723 places we cover in Hampshire. We also cover Southampton, around 22 miles from Foxcotte.
Anyone looking for mastic sealing in SP10 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Foxcotte, we also work in Charlton (1 mile south-east), Penton Mewsey (1 mile west), Penton Grafton (1 mile west), Penton Corner (1 mile south-west) and Hatherden (2 miles north). Bigger towns within reach include Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (7 miles west), Weeke (13 miles south-east), Stanmore (14 miles south-east) and Ludgershall (5 miles west).
Around Foxcotte
In Foxcotte, that means premises near Portway Infant School and White Hart Public House, among other places. Foxcotte’s nearest station is Andover station, about 1.2 miles south-east. A little further out are Andover Museum (1.7 miles south-east) and Andover War Memorial Hospital (0.9 miles south-east). For a walk, there’s Mill Lake and Anton Lakes.
Common questions from Foxcotte clients
Will you take on a block within reach of Andover station?
Yes, we work for agents, landlords and housing associations with blocks of every size. We work to your notice and access arrangements.
Can you work at a site such as Portway Industrial Estate, by Foxcotte?
Yes, sites like Portway Industrial Estate are within our area, along with the rest of Foxcotte. Send details of the unit and the work through our quote form for a quick quote.
Will residents or tenants be disturbed?
We plan around people living or working in the building. Dates and areas are agreed with you so residents or tenants can be told and communal access is kept open.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Can you send RAMS and CSCS details before starting?
We’re CHAS accredited, a Constructionline member and carry public liability insurance. Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.