Commercial sealant contractors in Foxcotte, Hampshire
Sealant work for offices, shops, hotels and other commercial buildings in Foxcotte. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Earlier reseals applied straight onto the failed bead
- External beads that have gone brittle and cracked
- Smeared sealant across finishes from a rushed job
Commercial sealant contractors in Foxcotte
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Commercial sealant contractors in Foxcotte
Inside a commercial building, sealant does a lot of quiet work: around sanitaryware, along worktops and splashbacks, at window boards, partition heads and floor junctions. Externally it keeps rain out of frame perimeters, panel joints and movement joints. Our applicators work on both the inside and the outside of the building. We work on washrooms and tea points, kitchen worktops and splashbacks and window and door perimeters, and the failures we’re asked to look at most are greasy, split joints in a kitchen or tea point and expansion joints with the sealant torn out. Most enquiries from Foxcotte start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
In an occupied building in Foxcotte, the job is planned so areas stay in use: we agree the order with you and hand back each area with its cure time.
Commercial sealant work around smaller places like Foxcotte tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Each has kitchens, washrooms and frames whose joints need renewing in time.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Location
- Foxcotte (SP10)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Foxcotte
Is Foxcotte too small for you to travel to?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Does your area include sites such as Portway Industrial Estate, near Foxcotte?
Yes, sites like Portway Industrial Estate are within our area, along with the rest of Foxcotte. Send details of the unit and the work through our quote form for a quick quote.
Is it OK to apply fresh sealant over existing beads?
The old bead is stripped out first. After that come cleaning, primer where needed, backing and the new sealant.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
When to call us in Foxcotte
If sealant tears through its centre, it has failed cohesively. Typically the movement was too much for the sealant chosen: a bead laid too thin, an over-stretched joint or the wrong movement class. The same product in the same joint tends to fail the same way, so width, depth and product are checked before we quote.
Site and facilities staff are often the first to spot these:
- Layers of sealant, all of them failing
- Black mould through washroom sealant that won’t clean off
- Frame sealant that has cracked, shrunk or pulled away
- Damp patches where an external joint has failed
On estates like Portway Industrial Estate (0.8 miles south of Foxcotte), the office and welfare end of each unit has its own sealant to maintain.
Questions to ask before you book
- How long is the guarantee, and what does it include?
- What site paperwork they can supply
- How the joint faces will be prepared and primed
- Will failed sealant be removed rather than covered?
How the job changes by surface
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Photos from a closer viewpoint help us price, and we’ll confirm the colours available for the specified product.
Movement joints in walls and floors
Floor joints that take trolleys or forklifts need a tougher filler or sealant. The choice comes down to how much the joint moves and what runs over it.
Site staff or a sealant specialist?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Frontages, fit-outs and joints in Foxcotte
A number of hotels sit less than 2 miles from Foxcotte. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes; work is planned so the hotel keeps trading. Foxcotte is about 64 miles from central London. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings.
Premises within reach of Andover station (1.2 miles south-east of Foxcotte) often have busy frontages where joints are seen by everyone passing. A business with units at Portway Industrial Estate and Mylen Road Business Park needn’t use two contractors for its sealant.
Foxcotte is about 2 miles north-west of Andover, in Hampshire. Foxcotte sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Foxcotte is one of 723 places in Hampshire on our list for sealant joints. For work in that direction, see our Southampton page, about 22 miles away.
Business premises anywhere in SP10 are within our area for sealant joints. Close to Foxcotte, our area also takes in Charlton (1 mile south-east), Penton Mewsey (1 mile west), Penton Grafton (1 mile west), Penton Corner (1 mile south-west) and Hatherden (2 miles north). Nearby towns on our patch include Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (7 miles west), Weeke (13 miles south-east), Stanmore (14 miles south-east) and Ludgershall (5 miles west).
Landmarks near Foxcotte
We work on buildings around Portway Infant School and White Hart Public House. The closest station to Foxcotte is Andover station, about 1.2 miles south-east. A little further out are Andover Museum (1.7 miles south-east) and Andover War Memorial Hospital (0.9 miles south-east). Not far away are Mill Lake and Anton Lakes.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Rural sites near Foxcotte may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Every failed bead is removed rather than covered.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
Before we start on site
- Warn occupants and staff about the work
- Send your site hours and access windows
- Arrange parking or a loading space
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email us with what you know.
Related advice
What happens if it’s left?
Some managers wait for a fit-out before touching the mastic. That’s reasonable for internal joints that are just tired-looking, but a joint letting water in now keeps doing damage until the refurb arrives. We can seal the urgent joints now and leave the rest for the programme. For buildings around smaller places like Foxcotte, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why appoint us
- Workmanship guaranteed for 12 months
- A fixed quote before work starts
- One number for every site we cover
- Work to your specification and the manufacturer’s guidance
See how commercial sealant jobs are priced and how we’re accredited.
Also in Foxcotte
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Put external and wet-area joints on a regular inspection round
- Keep abrasive pads and scrapers off resealed joints
- Check the asbestos register before anyone disturbs old sealant in an older building
- Don’t let cleaning or traffic back on before the cure time is up
New joints need their full cure time before they take water, cleaning or traffic. Cure time varies with the product, conditions and depth of the joint, so we confirm it for each area at handover. Keeping signs or barriers up until then protects the finish.
Once sealant fails in a movement joint, grit and debris get in. With nothing soft to close against, the materials either side take the load and start to break up. That turns a sealant job into something bigger.