Industrial and floor joint sealing in Wallington, Hampshire
Commercial sealant work in Wallington for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Chipped and spalling edges along forklift routes
- Brittle joint filler breaking up
- Saw-cut joints left open and packed with grit
Need floor joint sealing in Wallington?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions we are asked in Wallington
Is Wallington off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Does the sea air around Wallington change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Are you CHAS accredited?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
What do you need from us to quote?
Use our quote form, or email photos and a plan and tell us what runs on the floor. A fixed quote follows with the product and phasing set out.
Do you repair broken joint edges?
A filler needs sound edges to grip. If the arrises have spalled, we will say they need repair before filling, so you can decide how to proceed.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Floor joint sealing in Wallington
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so if the edges need repair before any filling, we will say so and leave that decision with you. If you are dealing with dock area joints that have failed first and grimy joint lines spoiling a showroom floor, we can put it right. Looking for mastic applicators who cover Wallington? We have been sealing commercial buildings since 2005.
Work in a smaller place like Wallington is normally one building at a time, so we gather photos and measurements first. Getting widths, depths and traffic details up front means one visit, not two.
A 12-month guarantee applies to all our work. If an installation problem shows up, speak to us on 01277 525 020 or email us and we will arrange a return visit.
- Place
- Wallington (PO16, PO14, PO17)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Our process
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact. For a job in Wallington, the main thing is a clear picture of the work, so send photos of each area. A fixed quote follows.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
Getting the site ready
- Move anything stored against the joints
- Flag any permit to work we will need
- Share your working hours and any access restrictions
Ask for a quote
To get a fixed quote, ring 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
Places near Wallington
Other services in Wallington
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- How much existing material needs removing
- The size and state of each joint
- Quantities, in metres or numbers
- The site’s rules and procedures
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Sending details for a quote
However big the job, these details speed things up:
- The site address and postcode
- When you need the work done
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Work for main contractors and building owners
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Wallington. One quote can cover more than one site, which keeps the paperwork simple.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Common problems we fix in Wallington
Oil, laitance, dust and old cleaning chemicals build up inside joints. Without cutting back to sound, clean concrete, the new material simply lifts out.
Things that usually lead to an enquiry:
- Soft sealant dragged out of trafficked joints
- Scruffy, dirty joint lines on a shop or showroom floor
- Saw-cut joints left open and packed with grit
- Drivers complaining about joints on a route
In a school such as Wykeham House School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- Proof of insurance
- Who will actually carry out the work
- The terms of the workmanship guarantee
Floor joint sealing in Wallington: the local picture
Wallington lies within about 1 mile of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Wallington lies roughly 64 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London.
Phasing is what makes joint work possible on busy sites such as Fareham Industrial Park (under half a mile north of Wallington): one bay, aisle or car park row at a time. Retail parks like Broadcut Retail Park, under half a mile to the north-west of Wallington, have long runs of car park and yard joints taking daily traffic.
Wallington is about 1 mile east of Fareham, in Hampshire. Any commercial site in Wallington is covered. 723 places across Hampshire fall within our area, Wallington among them.
We cover the PO16, PO14 and PO17 postcode districts. Buildings on Bath Lane, Drift Road and Osborn Road are within our area. You will find Wallington on or near the A32, so getting applicators and materials to site is simple. Sites close to Wallington are covered too, including Fareham Common (1 mile south-west), North Fareham (1 mile north), Fareham (1 mile west), Boarhunt (2 miles north-east) and Crockerhill (2 miles north). Nearby towns on our patch include Gosport (4 miles south), Havant (8 miles east), Eastleigh (11 miles north-west), Horndean (8 miles north-east), Totton (15 miles west) and Chandler's Ford (13 miles north-west).
Near you in Wallington
We work on buildings around Harrison Primary School, Cams Hill School and The Golden Lion Public House. The nearest railway station is Fareham station, about 1 mile west of the centre. Well-known places in the area include Fareham Shopping Centre (under half a mile west) and Knowle Hospital (2.3 miles north-west). For a walk, there’s Portsdown Hill and West of the River Alver.
What happens if it’s left?
Some runs only need partial renewal or topping up. Where existing filler is well bonded and the gap beside it is small, a full strip-out isn’t always needed, and we will say which joints need what. In a smaller place such as Wallington, getting a contractor back for a second visit takes time, so it’s worth dealing with every failing joint at once.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Wallington
- Commercial sealant work since 2005
- CSCS-carded applicators
- Fixed quotes based on photos, drawings or a visit
- Old sealant cut out, never sealed over
Take a look at our cost guide and our accreditations and insurance.
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.