Coloured and colour-matched sealant in Wallington, Hampshire
Coloured and colour-matched sealant for visible joints throughout Wallington and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- White or grey sealant that clashes with the finish
- Discoloured joints on a visible elevation
- Fit-outs with a sealant colour in the specification
Need coloured sealant in Wallington?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Wallington
Where colour is critical, a sample bead in a discreet spot settles the question. Sealant can look slightly different once it has cured, and again in different light. Let us know who signs off colour, and we will fit the sample into the programme. If you have marked sealant in hotel bathrooms and hotel refurbishments with a set colour scheme, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Wallington is the same: the right product in a properly prepared joint.
For a business in Wallington, it usually makes sense to put the sealant work into one visit: shopfront, washroom, kitchen and any external joints done together. Fewer visits means less disruption to trading, and where colour matters on the frontage, we’ll confirm what’s available for the product.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Wallington (PO16, PO14, PO17)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Wallington clients
Can you work at a site such as Broadcut Retail Park, by Wallington?
Yes. We cover Wallington and the area around it, including industrial estates, business parks and retail parks such as Broadcut Retail Park. Photos and a short description are enough for a first look.
Is Wallington too small for you to travel to?
Not at all. Wallington is within our area. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we will set out a timescale with the quote.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Do you work on hotel and retail fit-outs?
Yes. Tell us the product and colour reference and we’ll confirm availability for a quick quote. Tell us your site hours and access windows and we will plan around them.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Will the sealant be an exact match to our finish?
No, not always. We match as closely as the product’s range allows and can agree a sample bead first.
What the job involves on each surface
Office fit-outs
Office fit-outs include glazed partitions, kitchens, washrooms and reception areas. A consistent colour across floors looks deliberate.
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. The nearest colour in the range is agreed with you.
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Work in places the size of Wallington is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
Preparing the site
- Let us know about inductions and permits
- Send any specification or drawings in advance
- Tell staff and tenants when we’ll be in
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Read more
Keeping the joints sound
To get the most from the new sealant:
- Check a trial length in real light
- Agree the sealant colour early and write it into the specification
- Standardise colours across a portfolio
- Clean coloured joints with mild products
Expect some change in appearance over the years. Some fading is part of normal ageing outdoors.
Standardise the sealant colour on multi-site work. It keeps repairs and new sites consistent and easier to manage.
Coloured sealant around Wallington: what changes locally
Wallington lies within about 1 mile of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Where a frontage needs a particular colour, the product still has to suit that exposure. Less than 3 miles from Wallington there are at least three named estates and business parks. Each new occupier on a park like these tends to refit, from reception to staff kitchen, often in a colour the occupier specifies.
Premises within reach of Fareham station, 1 mile to the west of Wallington, often have busy frontages where joints are seen by everyone passing. If you have premises on more than one site, say at Broadcut Retail Park and Fareham Industrial Park, one contractor and one quote can cover both.
Wallington is about 1 mile east of Fareham, in Hampshire. We cover commercial sites throughout Wallington. Our Hampshire coverage takes in 723 places, large and small.
We take on colour-matched joints across the PO16, PO14 and PO17 postcode area. We cover commercial and managed buildings on Bath Lane, Drift Road and Osborn Road and the roads nearby. Being close to the A32, Wallington is straightforward for us to reach. Nearby places we also cover include Fareham Common (1 mile south-west), North Fareham (1 mile north), Fareham (1 mile west), Boarhunt (2 miles north-east) and Crockerhill (2 miles north) for colour-matched joints. A short drive away, we cover Gosport (4 miles south), Havant (8 miles east), Eastleigh (11 miles north-west), Horndean (8 miles north-east), Totton (15 miles west) and Chandler's Ford (13 miles north-west).
What’s near Wallington
In Wallington, that means premises near Harrison Primary School, Cams Hill School and The Golden Lion Public House and the streets around them. The nearest railway station is Fareham station, about 1 mile west of the centre. A little further out are Fareham Shopping Centre (less than half a mile west) and Knowle Hospital (2.3 miles north-west). Green spaces nearby include Portsdown Hill and West of the River Alver.
Towns and villages near Wallington
Also in Wallington
Common problems we fix in Wallington
Failed sealant still has to be dealt with, whatever its colour: it can crack, peel or harden with age and movement. The fix is a full cut-out and a new bead in the right colour.
Typical triggers for a call:
- Stained or mouldy coloured joints in washrooms
- White or grey sealant that clashes with the finish
- Previous reseals that don’t match the original
- Joints that need to match a new RAL frame colour
A hotel such as Lysses House Hotel (to the west of Wallington) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Comparing quotes
- What site paperwork they can supply
- How joint depth will be controlled
- Their public liability cover
- Is the sealant right for the movement and the substrate?
When something else is needed
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Repairing damaged frames or cladding
- Paint over sealant on joints that move too much
- Colour variation across natural stone or brick that no single shade can match
Not sure which it is? You can phone 01277 525 020 or email the details over and we’ll tell you honestly.
Joints and surfaces we work on
- Shop-fit joinery and counters
- Natural stone and brick
- Powder-coated and anodised frames
- Office fit-out finishes
- Cladding panels
- Hotel bathrooms and public areas
What happens if it’s left?
Resealing a full run gives a consistent colour. Small repairs at different times rarely match, and the patchwork effect grows. For buildings in places like Wallington, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why appoint us
- A range of standard colours, depending on the product
- Joints cleaned back to sound surfaces
- Fully insured, including public liability cover
- Constructionline member