Industrial and floor joint sealing in Street End, West Sussex
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Street End and the surrounding area. Send details for a fixed quote.
- Old filler gone hard, cracked or loose
- Dock area joints that have failed first
- Saw-cut joints left open and packed with grit
Need floor joint sealing in Street End?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Should maintenance staff do it?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Floor joint sealing for commercial buildings in Street End
Forklifts and pallet trucks are hard on open joints. Each crossing knocks the unsupported edge until a crisp saw cut becomes a wide, broken groove. A properly filled joint carries the wheel over and protects both arrises. It also smooths the route for drivers and stock. If you have filler that has parted from one face and chipped and spalling edges along forklift routes, we can put it right, on construction joints, retail and showroom floors and forklift and pallet-truck routes alike. A single leaking joint is often how a building in Street End first comes to us: we look at the rest while we’re there and tell you what we find.
Halls, schools and small commercial buildings near places like Street End have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Street End (PO20)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Floor joint sealing around Street End: what changes locally
The sea is no more than about 2 miles from Street End. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. At about 58 miles from central London, Street End is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London.
A campus such as University of Chichester, 3.8 miles north-east of Street End, has long runs of movement joint in its buildings, decks and paving. In a school such as Sidlesham Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Across sites such as Ferry Yard Industrial Park (2 miles south of Street End), floor and movement joints can be sealed in phases so units keep working.
Street End is about 4 miles north of Selsey, in West Sussex. Across the PO20 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. 373 places across West Sussex fall within our area, Street End among them. For work in that direction, see our Portsmouth page (13 miles or so).
Business premises anywhere in PO20 are within our area for floor joints. If your site is on Church Lane, Selsey Road and Chalder Lane or close by, send details and we will quote for floor joints. Close to Street End, our area also takes in Sidlesham Common (1 mile north-west), Sidlesham (1 mile south), Keynor Estate (1 mile south), Fisher (1 mile north-east) and South Mundham (2 miles north-east). Bigger towns within reach include Bognor Regis (5 miles east), Chichester (4 miles north), Selsey (4 miles south), Littlehampton (11 miles east), Rustington (12 miles east) and Angmering (14 miles east).
Local landmarks in Street End
The nearest railway station is Chichester station, about 3.2 miles north. A little further out are Chichester Castle (3.8 miles north) and Chichester Cathedral Treasury (3.4 miles north).
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is one of these:
- Level or flatness problems across the floor
- Slab panels that rock or move under load
- Worn screed or surface finishes
If in doubt, give us a call on 01277 525 020 or send photos by email and we will say what we think.
Where we work in Street End
- Retail and showroom floors
- Saw-cut induced joints
- Construction joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Loading bays
Quoting for work in Street End
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- How much there is to seal
- The size and state of each joint
- Distance, for remote addresses
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Sending details for a quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- The type of building and who uses it
- Clear photos of the problem areas
- Any specification or named product
- Your programme or deadline
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Our process
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Rural sites near Street End may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We look at joint widths, edge condition and the traffic on each route.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- For older buildings, check the asbestos register before work
- Point out any areas we must not close
- Flag any permit to work we will need
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email a schedule or drawings.
Advice
FAQs: Street End
Can you work at a site such as Enborne Business Park, by Street End?
Yes, sites like Enborne Business Park are within our area, along with the rest of Street End. A few photos and the unit address let us price the work.
Our building in Street End is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
What information helps you price floor joint sealing?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan let us give a quick quote. For larger floors, a site visit is often best so phone 01277 525 020 or use the quote form to set one up.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can you phase floor joint work around operations?
In most cases, just the area being treated is coned off. Traffic returns to each zone once it has cured, then we move to the next.
How soon can traffic go back on the floor?
Each product has its own cure time and cooler floors take longer. Phasing is planned with that in mind.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Different surfaces, different methods
Construction joints
Some construction joints have steel edge protection, others are plain concrete. If the edges look unsound, we will say so before any filling is done.
Saw-cut induced joints
Most of the joints in a warehouse floor are saw cuts. Each one is cleaned out and filled to the specified depth with a flush finish.
Places near Street End
What else we do in Street End
Why it’s worth doing now in Street End
An open joint is a modest filling job while its edges are sound. Left until they break, it needs an edge repair before any filling can start which means more downtime in that zone. Around Street End, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What you get with us
- CSCS-carded applicators
- Clear, fixed quotes
- Constructionline member
- Failed material removed, not covered up