Floor Joint Sealing contractors in Priddy's Hard
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Priddy's Hard and the surrounding area. Send details for a fixed quote.
- A gap opening alongside old joint filler
- Saw-cut joints left open and packed with grit
- Cracked and crumbling joint fill
Floor joint sealing across Priddy's Hard
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing for commercial buildings in Priddy's Hard
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. If you have joint edges breaking up under truck wheels and a gap opening alongside old joint filler, we can put it right, whatever the surface. Whoever orders the work in Priddy's Hard, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
In and around smaller places like Priddy's Hard, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Every job we finish is backed by a 12-month workmanship guarantee, in Priddy's Hard as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Priddy's Hard (PO12)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
We check first that sealant really is the fix. It won’t put right:
- Uneven floors that need grinding or levelling
- A failing floor coating, which is a flooring contractor’s job
- Broken concrete either side of the joint
If you are not sure, just give us a call on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
What we seal
- Retail and showroom floors
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
- Loading bays
- Forklift and pallet-truck routes
FAQs: Priddy's Hard
Can you work at a site such as Cranbourne Industrial Estate, by Priddy's Hard?
Yes. Estates, retail parks and business parks around Priddy's Hard, Cranbourne Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Our building in Priddy's Hard is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Do you cover Priddy's Hard?
Yes. We cover Priddy's Hard and the rest of Hampshire. To discuss a job, speak to us on 01277 525 020 or email a schedule or drawings.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Backing rod, priming and other preparation
- Travel to remote or island sites
- Working within restricted access windows
- Whether old sealant has to be cut out first
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or email the details over.
When to bring in a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need, and we clear our waste as we work. For a building around Priddy's Hard, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Let building users know which areas are affected
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
After the work
Keep the joints in good shape with a few simple steps:
- Stop forks and pallets being dragged across joints
- Put loading bays at the top of the list
- Tell us about strong cleaning chemicals before we quote
- Walk the main routes and inspect joint lines on a regular cycle
We’ll give you a time before trucks can run over the new joints, and it’s worth enforcing. In a busy building, barriers keep early traffic away.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas so nothing is left to fail.
Common problems we fix in Priddy's Hard
A slab keeps shrinking for a long time after it is cast, and saw-cut joints give that shrinkage a planned place to crack. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Look out for the following:
- Brittle joint filler breaking up
- Grimy joint lines spoiling a showroom floor
- Trucks and loads jolting over damaged joints
- Unfilled floor joints collecting dirt and grit
Another example is QinetiQ Haslar Marine Technology Park (1.4 miles south of Priddy's Hard), where floors and yards would be done in stages around the occupiers.
Questions to ask before you book
- Their public liability cover
- Will failed sealant be removed rather than covered?
- Are they CHAS accredited or on Constructionline?
- Will CSCS-carded applicators be on site?
Also near Priddy's Hard
What else we do in Priddy's Hard
Floors, slabs and movement joints in Priddy's Hard
With the shore within about 1 mile, Priddy's Hard counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Priddy's Hard lies roughly 65 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
University campuses such as University of Portsmouth - North Zone, 1.3 miles south-east of Priddy's Hard, have car parks, paved walkways and building elevations with movement joints. Hospitals like Gosport War Memorial Hospital, 1.3 miles to the south-west of Priddy's Hard, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Priddy's Hard is about 1 mile east of Gosport, in Hampshire. Priddy's Hard sits inside our coverage and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 723 places in Hampshire.
Commercial sites across PO12 are covered for floor joints. If your site is on Weevil Lane, Orion Avenue and Salt Meat Lane or close by, send details and we will quote for floor joints. Just outside Priddy's Hard, we also work in Forton (1 mile south-west), Elson (1 mile north-west), Gosport (1 mile west), Bridgemary (2 miles north-west) and Rowner (2 miles north-west). A short drive away, we cover Havant (7 miles north-east), Eastleigh (15 miles north-west), Fareham (4 miles north-west), Horndean (9 miles north-east), Hedge End (11 miles north-west) and Waterlooville (7 miles north-east).
Local landmarks in Priddy's Hard
Around Priddy's Hard, our work takes us to commercial buildings near Brune Park Community School, The Windsor Castle pub and Elson Junior School. Priddy's Hard’s nearest station is Portsmouth Harbour station, roughly 1 mile south-east of the centre. Nearby you’ll also find Tricorn Centre (1.6 miles east) and Search (0.8 miles south). Not far away are West of the River Alver and Portsdown Hill.