Coloured Sealant in Priddy's Hard
Coloured and colour-matched sealant for visible joints throughout Priddy's Hard and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Standard-colour sealant spoiling a high-end finish
- Old colour-matched joints lifting at the edges
- Smeared sealant on stone or joinery
Coloured sealant across Priddy's Hard
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
How we handle coloured sealant in Priddy's Hard
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building on sites in Priddy's Hard. On resealing, matching the existing colour is often as important as the seal itself, particularly where the building’s look matters. If you have shop fits that need consistent sealant colours across sites and failed coloured sealant that has split or peeled, we can put it right. For commercial sealant work in Priddy's Hard, you deal with one contact from quote to sign-off, whether it’s one building or several.
Work in smaller places such as Priddy's Hard tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Priddy's Hard (PO12)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Sealant on show in Priddy's Hard’s commercial buildings
Priddy's Hard lies within about 1 mile of the sea. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. A 2-mile radius around Priddy's Hard takes in a good number of hotels. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet; work is planned so the hotel keeps trading.
Premises within reach of Portsmouth Harbour station (to the south-east of Priddy's Hard) often have busy frontages where joints are seen by everyone passing. For a hotel such as Railway Hotel (0.6 miles south of Priddy's Hard), the colour of a joint at the bar or the bath matters to the look of the room. Occupiers with premises at both Cranbourne Industrial Estate and QinetiQ Haslar Marine Technology Park could have the sealant at each handled under one quote.
Priddy's Hard is about 1 mile east of Gosport, in Hampshire. Businesses, contractors and managing agents in Priddy's Hard use us for work on colour-matched joints. We work across 723 places in Hampshire, from busy centres to rural villages.
Work on colour-matched joints is covered throughout PO12, whatever the building. We cover commercial and managed buildings on Weevil Lane, Orion Avenue and Salt Meat Lane. Just outside Priddy's Hard, we also work in Forton (1 mile south-west), Elson (1 mile north-west), Gosport (1 mile west), Bridgemary (2 miles north-west) and Rowner (2 miles north-west). Further afield, our area takes in Havant (7 miles north-east), Eastleigh (15 miles north-west), Fareham (4 miles north-west), Horndean (9 miles north-east), Hedge End (11 miles north-west) and Waterlooville (7 miles north-east).
Near you in Priddy's Hard
Around Priddy's Hard, our work takes us to commercial buildings near Brune Park Community School, The Windsor Castle pub and Elson Junior School. The nearest railway station is Portsmouth Harbour station, about 1 mile south-east of the centre. Nearby you will also find Tricorn Centre (1.6 miles east) and Search (0.8 miles south). For a walk, there’s West of the River Alver and Portsdown Hill.
Aftercare for building managers
For the best life from the joints:
- Insist on the agreed colour for any repair
- Look at the cured colour before the full run
- Avoid abrasive pads on coloured sealant
- Standardise colours across a portfolio
Note the sealant type and colour on the building file. It makes matching later repairs much easier, avoiding a patchwork.
Ask for a trial bead on high-profile areas. A sample in real light shows how it will look.
Why deal with it now?
Agreeing the colour before work starts avoids paying twice. A sample takes little time against redoing a whole elevation. Halls, stores and units around places like Priddy's Hard may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a quote once you have the details.
Why appoint us
- Products installed to the manufacturer’s instructions
- A Constructionline member, so easy to vet
- Standard and matched colours in many product ranges
- Colours confirmed for the specified product
Read our cost guide or how we’re accredited.
Also near Priddy's Hard
More services for Priddy's Hard
Surface by surface
Natural stone
Sandstone, limestone and granite each have distinct tones. Colour is agreed on site where possible before the full run.
Cladding panels
Multi-coloured cladding needs a joint colour that works across it. A neutral tone from the range often works best, and a sample settles it.
FAQs: Priddy's Hard
Can being near the sea in Priddy's Hard affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Is Priddy's Hard too far out for you?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Can the building stay open while you work?
Typically, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Do you do a sample bead?
Yes. We can fit a sample into the programme before the main run.
Diagnose, treat, sign off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For work around Priddy's Hard, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We start with photographs, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Preparing the site
- Agree which areas must stay open
- Send any specification or drawings in advance
- Tell us what induction or permit system the site runs
Ask for a quote
For a fixed quote, call 01277 525 020 or use the quote form. Our quote form is another easy route.
Read more
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.