Floor Joint Sealing contractors in Picket Twenty
Floor joint sealing in Picket Twenty, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- A gap opening alongside old joint filler
- Untidy open joints in a retail unit
- Flexible sealant torn out by wheels
Floor joint sealing for Picket Twenty sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Spalled arrises, which need an edge repair first
- Wide or random cracking that suggests a structural issue
- Damaged or worn floor coatings and screeds
If you’re not sure, just call 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
- Loading bays
- Joints along racking aisles
Floor joint sealing in Picket Twenty
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and every one of those joints is an exposed edge under hard wheels. Our job is to put the right filler or sealant into them for the loads and the movement they see so the edges are held up and debris can’t pack in. Most enquiries involve failing joints at loading bays and dock doors and saw-cut joints left open and packed with grit, across joints along racking aisles, retail and showroom floors and loading bays. Searching for sealant specialists in Picket Twenty? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Around smaller places such as Picket Twenty, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Picket Twenty (SP10, SP11)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Picket Twenty clients
Will you take on work at estates like Walworth Business Park, close to Picket Twenty?
Yes. We cover Picket Twenty and the area around it, including industrial estates, business parks and retail parks such as Walworth Business Park. To start, just ring 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Can you take on a job at a hospital such as Andover Hospital (Grounds)?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Do you work in Picket Twenty?
Yes. Picket Twenty falls within our area, and the simplest way to start is to phone 01277 525 020 or email us.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Can the warehouse stay open while you work?
In the majority of cases, just the area being treated is coned off. Traffic returns to each zone once it has cured, then we move to the next.
Aftercare for building managers
For the best life from the joints:
- Treat loading bay joints first if they’re failing
- Photograph any joint that starts to chip
- Walk the main routes and inspect joint lines on a regular cycle
- Tell us about strong cleaning chemicals before we quote
We’ll give you a time before trucks can run over the new joints and it pays to stick to it. In a busy building, barriers keep early traffic away.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder so early treatment saves a lot of trouble.
Floor joint sealing around Picket Twenty: what changes locally
At least three named trading, business or retail sites lie within about 3 miles of Picket Twenty. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Central London is about 62 miles from Picket Twenty. The roads out of London are lined with trade parks and distribution sheds.
Schools such as Pilgrims' Cross CofE Aided Primary School have movement joints in their walls and floors that are easy to overlook. Business parks such as Walworth Business Park, 0.6 miles to the north of Picket Twenty, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Picket Twenty is about 1 mile east of Andover, in Hampshire. Anywhere in SP10, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Our Southampton page has more on work in that area (20 miles or so).
Business premises anywhere in SP10 and SP11 are within our area for floor joints. Among the streets we cover are Levy Road, London Road and Stalls Road, and sites on any of them can send details for a fixed quote. Being close to the A3093, Picket Twenty is easy to get to with materials and equipment. If your building is just outside Picket Twenty, we cover Andover Down (1 mile north-east), Finkley Down (1 mile north), Picket Piece (1 mile north-east), Andover (1 mile west) and East Anton (1 mile north-west). Nearby towns on our patch include Winchester (12 miles south-east), Romsey (15 miles south), Hyde (11 miles south-east), Tidworth (9 miles west), Weeke (11 miles south-east) and Kempshott (14 miles east).
Landmarks near Picket Twenty
In Picket Twenty, that means premises near Winton Community Academy and Winton Community Academy. Picket Twenty’s nearest station is Andover station, roughly 1.8 miles west of the centre. Other landmarks nearby include Finkley Down Farm Museum (1 mile north) and Andover War Memorial Hospital (1.9 miles west). Green spaces nearby include Anton Lakes and Mill Lake.
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Picket Twenty can sit alongside others in a wider programme.
Common problems we fix in Picket Twenty
Loading bay joints are exposed to wind, wet tyres and bigger temperature swings on top of the heaviest turning movements. That is normally where joint failure starts.
Any of the following is a good reason to get the joints checked over:
- Failing joints at loading bays and dock doors
- Joint fill separating from the concrete
- Trucks and loads jolting over damaged joints
- Sealant pulled out along a truck route
A healthcare site such as Andover Hospital (Grounds) (to the west of Picket Twenty) depends on car parks, ramps and service yards whose joints take traffic all day.
Questions to ask before you book
- What site paperwork they can supply
- What the guarantee covers, and for how long
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Places near Picket Twenty
What else we do in Picket Twenty
From enquiry to sign-off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. If others near Picket Twenty need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Before we start on site
- Point out parking and an unloading spot
- Move anything stored against the joints
- Share the asbestos register for older buildings
Request a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.