Floor Joint Sealing contractors in Perrywood
Floor joint sealing and filling in warehouses, factories and industrial units throughout Perrywood and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Untidy open joints in a retail unit
- Old filler gone hard, cracked or loose
- Joint fill separating from the concrete
Floor joint sealing in Perrywood
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Leave it or put it right?
Every jolt over a broken joint passes into the truck, the load and the driver. Wheels and bearings wear faster and loads can shift, adding costs nobody plans for. A filled joint takes most of that out. Older rural buildings around Perrywood move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.
Why choose Mastic Doctor in Perrywood
- Constructionline member
- Workmanship guaranteed for 12 months
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
See how commercial sealant jobs are priced and our accreditations.
About our floor joint sealing in Perrywood
Before quoting, we look at what the floor is telling us: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. The enquiries we see most involve unfilled floor joints collecting dirt and grit and a gap opening alongside old joint filler, on loading bays, construction joints and saw-cut induced joints. A single leaking joint is often how a building in Perrywood first comes to us: we look at the rest while we are there and tell you what we find.
Smaller community and commercial buildings around Perrywood have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Where
- Perrywood (ME13)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- How much existing material needs removing
- The total length or number of joints
- The site’s rules and procedures
- Whether the work must be split into stages
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- The product your specification calls for
- Clear photos of the problem areas
- The type of building and who uses it
- How the joints are reached, and at what height
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Rural sites near Perrywood may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- We tell you when each zone can carry trucks again and move on to the next.
What we need from you
- Share the asbestos register for older buildings
- Send any specification or drawings in advance
- Arrange parking or a loading space
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call 01277 525 020 or email a schedule or drawings.
Advice
Towns and villages near Perrywood
More services for Perrywood
After the work
Keep the joints in good shape with a few simple steps:
- Allow for topping up joints as a new slab settles
- Remind operators to lift rather than drag
- Clear packed debris from open joints regularly
- Treat loading bay joints first if they’re failing
We’ll give you a time before trucks can run over the new joints, and it’s worth enforcing. In a busy building, barriers keep early traffic away.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it and that takes longer and closes areas for longer.
Your questions answered
What site paperwork comes with a job in Perrywood?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Does a site in Perrywood have to shut while its joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Can the warehouse stay open while you work?
We phase it. Areas are taken out of use a section at a time around the site hours and access windows you give us.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How do we get a quote for floor joints?
Approximate metres of joint, photos of typical and worst areas, and a floor plan let us give a quick quote. We can visit where that helps, and you can ring 01277 525 020 or send details through our quote form to arrange it.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Slabs, ramps and loading bays in Perrywood
Perrywood is about 47 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. Rainfall across the South East, Perrywood included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.
For a school such as Selling Church of England Primary School, playground and building joints can be done in the holidays.
Perrywood is about 4 miles south-east of Faversham, in Kent. Any commercial site in Perrywood is covered. We work across 931 places in Kent. London is covered too, some 47 miles away.
Work on floor joints is covered throughout ME13, whatever the building. We also cover Selling (1 mile north), Hogben's Hill (1 mile north-west), Shottenden (1 mile south), Neames Forstal (1 mile north-east) and Gushmere (1 mile north) for floor joints. Further afield, our area takes in Ashford (9 miles south), Canterbury (7 miles east), Sittingbourne (10 miles north-west), Whitstable (8 miles north-east), Faversham (4 miles north-west) and Herne Bay (12 miles north-east).
Near you in Perrywood
We work on buildings around The White Lion Public House. For rail, the closest station is Selling station, about 1.2 miles north-east of the centre. Nearby you will also find Tower keep castle at Chilham (2.1 miles south-east).
Common problems we fix in Perrywood
Joints near dock doors see colder air, rain blown in and water off vehicles, as well as the tightest turning loads. That is typically where joint failure starts.
Typical triggers for a call:
- Chipped and spalling edges along forklift routes
- Unfilled floor joints collecting dirt and grit
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
For floors and slabs around Perrywood, the product is chosen for the traffic and the movement at each joint.
What your quote should include
- The terms of the workmanship guarantee
- How they’ll work around occupants
- What level of public liability insurance do they hold?
- Will RAMS and insurance details be available?
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.