Industrial and floor joint sealing in Ossemsley, Hampshire
Need floor joint sealing in Ossemsley? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Chipped and spalling edges along forklift routes
- Joint fill separating from the concrete
- Scruffy, dirty joint lines on a shop or showroom floor
Need floor joint sealing in Ossemsley?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Ossemsley
Across Ossemsley and the rest of Hampshire, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photos and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. Most enquiries involve failing joints at loading bays and dock doors and soft sealant dragged out of trafficked joints, on construction joints, loading bays and joints along racking aisles. Searching for sealant specialists in Ossemsley? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Around smaller places such as Ossemsley, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our workmanship is guaranteed for 12 months, in Ossemsley as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Place
- Ossemsley (BH25)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Ossemsley
Can being near the sea in Ossemsley affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you take on work at healthcare sites like Lymington New Forest Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Will we need to close the floor?
Normally only the zone we’re working in has to close. Each zone reopens when the product can take traffic, then we move to the next.
What information helps you price floor joint sealing?
A rough joint length, a few photos and a site plan let us give a quick quote. We can visit where that helps so give us a call on 01277 525 020 or use the quote form to set one up.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Other services in Ossemsley
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Location, for remote and island sites
- Joint width, depth and condition
- Site requirements such as inductions and permits
- Quantities, in metres or numbers
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
What to include in your enquiry
However big the job, these details speed things up:
- Whether the building will be occupied during the work
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
- The postcode of the building
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Floors, slabs and movement joints in Ossemsley
Ossemsley sits close to the coast, within about 3 miles. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Ossemsley is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
Schools like Ballard School often have long brick elevations with movement joints that age quietly. Estates like Gore Road Industrial Estate (1.8 miles south of Ossemsley) combine warehouse slabs, yards and loading bays, all with joints under wheels.
Ossemsley is about 2 miles north of New Milton, in Hampshire. Our applicators travel to Ossemsley for work on floor joints. Ossemsley is one of 723 places we cover in Hampshire. Southampton is covered too, some 15 miles away.
Business premises anywhere in BH25 are within our area. Buildings on Green Lane and Ossemsley South Drive are within our area for floor joints. Sites close to Ossemsley are covered too, including Bashley (1 mile south-east), Wootton (1 mile north), Tiptoe (2 miles east), Mead End (2 miles east) and Ashley (2 miles south-east). A short drive away, we cover Totton (12 miles north-east), Lymington (5 miles east), Hythe (13 miles north-east), Ringwood (7 miles north-west), Barton on Sea (3 miles south) and Dibden Purlieu (12 miles north-east).
Near you in Ossemsley
We work on buildings around The Arnewood School and The Rising Sun pub, among other places. The nearest railway station is New Milton station, about 1.7 miles south of the centre. Well-known places in the area include Highcliffe Castle (3.5 miles south-west) and Sammy Miller Motorcycle Museum (1 mile south). Open spaces near Ossemsley include Milford on Sea LNR.
Different surfaces, different methods
Construction joints
Some construction joints have steel edge protection, others are plain concrete. We’ll tell you if the edges or any armouring look like they need attention before filling.
Saw-cut induced joints
Sawn joints make up most of the joint length in a typical industrial floor. We clear them back to clean concrete and fill them to the depth the product calls for, finishing flush with the slab.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building around Ossemsley, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Flag any permit to work we’ll need
- Send your site hours and access windows
Ask for a quote
For a fixed quote, call the office on 01277 525 020 or email the details over. Our quote form is another easy route.
Advice
Common problems we fix in Ossemsley
Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete, the new material simply lifts out.
Look out for the following:
- A gap opening alongside old joint filler
- Saw-cut joints left open and packed with grit
- Drivers complaining about joints on a route
- Old filler gone hard, cracked or loose
For an estate such as Lymington New Forest Hospital, 5.4 miles east of Ossemsley, the joints in ramps, decks and long building elevations all need attention over time.
What your quote should include
- Proof of insurance
- What site paperwork they can supply
- The terms of the workmanship guarantee
- Whether primer will be used where the manufacturer specifies it
Owners, agents and contractors
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Allow for topping up joints as a new slab settles
- Mention any aggressive cleaning regime at quote stage
- Stop forks and pallets being dragged across joints
- Keep trucks off new joints until we say they’re ready
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering and keep photographs so changes are easy to compare.
While the concrete edges are intact, it’s a filling job. After the edges go, repairs come into it and that takes longer and closes areas for longer.