Hampshire · England
Commercial sealant contractors in BH25
Sealant work for contractors, FMs and building owners across BH25, from New Milton, Barton on Sea and Ashley, with a fixed quote before we start.
Mastic and sealant across BH25
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in BH25
Our services across BH25
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Commercial sealant contractors
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Commercial washroom and wet-area sealing
- See all services
Let us know the job and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or send details through our quote form.
Postcodes nearby
Elsewhere in Hampshire
Towns and villages in Hampshire
Every area we cover
Commercial sealant contractors in BH25: how it works
Some sealants used before 2000 can contain asbestos, so older stock needs a check first. We ask to see the asbestos register or survey before old sealant is disturbed, since managing asbestos is the dutyholder’s responsibility. If a material is suspected, work stops until it’s tested, and we don’t remove asbestos-containing materials ourselves. We work on floor and threshold joints, kitchen worktops and splashbacks and washrooms and tea points, and what we’re called in for most is a top-up bead over failed sealant, now lifting and wall and floor joints that have lost their seal.
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
What you will pay
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
What you get with us
- Health and safety: CHAS accredited
- A range of standard colours, depending on the product
- Colour options checked against the specified product
- Colours chosen to suit frames, cladding or finishes where possible
Getting a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Near you in New Milton
We work on buildings around The Arnewood School, New Milton Junior School and The Arnewood School. You will also find Parish Church of St Magdalene (0.5 miles south-west) and The George Centre pub (0.5 miles south). New Milton has its own railway station: New Milton station. A little further out are Highcliffe Castle (2.7 miles south-west) and Sammy Miller Motorcycle Museum (1 mile north-west). Not far away are Milford on Sea LNR.
Commercial premises across BH25
Across BH25, from New Milton, Barton on Sea and Ashley to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact.
Around the motorway corridors of the South East, business parks and industrial estates are common, and we cover BH25 along with the rest of the region. BH25 includes coastal places, where facades, frames and external slabs take more weather than inland. We take that exposure into account when choosing the product.
New Milton: Premises within reach of New Milton station (under half a mile north-east of New Milton) often have busy frontages where joints are seen by everyone passing. A hotel such as Chewton Glen Hotel & Spa (1.1 miles south-west of New Milton) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Commercial clients in BH25
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Different surfaces, different methods
Facade and cladding joints
Facade joints move every day as panels warm and cool. The product has to suit the movement, and the depth has to be controlled with backing. We confirm the access in place before we quote.
Washrooms and toilets
Black sealant in a toilet block is normally beyond cleaning. The lasting answer is removal, preparation and a new sanitary bead, planned so the building keeps enough facilities in use.
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Structural cracks or movement the joints weren’t designed for
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- A failed roof covering or waterproofing membrane
Signs you need commercial sealant contractors
Resealing over the top is a false economy we come across often. New silicone has nothing to key into. Getting back to a clean joint then means removing every layer.
If one of these sounds familiar, it’s time for a closer look:
- Movement joints packed with grit and debris
- Layers of sealant, all of them failing
- Leaks that seem to come through a sealant line
- Messy, uneven beads from earlier work that let the building down
Your questions answered
Can you supply RAMS and insurance details?
Send your site requirements with the enquiry, and the paperwork is confirmed with the quote. From you, we’ll need the asbestos information for older buildings and any site rules.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Does commercial sealant work come with a guarantee?
A 12-month guarantee covers the workmanship from handover. Keeping joints clean and inspected helps them last well beyond that.
How many days will you need on site?
That varies with the scale of the job, but the work normally takes as long as the agreed scope needs, from a single visit to a programme spread over several weeks. For bigger or phased jobs, we will set out a timescale with the quote.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
How do we get a quote?
Send photographs, drawings or a list of locations through the quote form on this site. If a visit is needed we’ll book one, and a fixed quote follows.
Do you take on multi-site sealant work?
Yes, we can. Send a list of addresses and what’s needed at each, and fixed prices follow, with a suggested sequence.