Floor Joint Sealing in Maltman's Hill
Looking for floor joint sealing in Maltman's Hill? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Joint edges breaking up under truck wheels
- Drivers complaining about joints on a route
- Unfilled floor joints collecting dirt and grit
Floor joint sealing across Maltman's Hill
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Maltman's Hill
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. The enquiries we see most involve loading bay joints breaking down and broken arrises where pallet trucks cross, on loading bays, retail and showroom floors and saw-cut induced joints. Most enquiries from Maltman's Hill start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
In and around smaller places like Maltman's Hill, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Maltman's Hill (TN27)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Once the work is signed off, these steps help:
- Keep photos of joints that look like they’re failing
- Keep grit out of unfilled joints in the meantime
- Keep trucks off new joints until we say they’re ready
- Plan for a top-up on newer floors
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so we choose something that tolerates them.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out so nothing is left to fail.
Where floor joints take the most wear near Maltman's Hill
Maltman's Hill sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open. Maltman's Hill lies roughly 42 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
A joint near Maltman's Hill that has lost its sealant lets in water and grit, and the edges suffer next; we will tell you if the edges need repairing first. Around Maltman's Hill, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Maltman's Hill is about 6 miles west of Ashford, in Kent. We cover commercial sites throughout Maltman's Hill, for single jobs and planned programmes alike. Maltman's Hill is one of 931 places we cover in Kent for floor joints. Sites around London have their own page, roughly 42 miles from Maltman's Hill.
Business premises anywhere in TN27 are within our area for floor joints. Nearby places we also cover include Wissenden (1 mile south), Chambers' Green (1 mile east), Pluckley Thorne (2 miles north-east), Fir Toll (2 miles north-east) and Newland Green (2 miles north) for floor joints. Bigger towns within reach include Maidstone (11 miles north-west), Ashford (6 miles east), Sittingbourne (13 miles north), Faversham (13 miles north-east), Davington (13 miles north-east) and Foley Park (12 miles north-west).
Local landmarks in Maltman's Hill
Maltman's Hill’s nearest station is Pluckley station, about 1.2 miles east of the centre. A little further out are Romden Castle (0.7 miles south-west).
Questions about Maltman's Hill
Is Maltman's Hill too far out for you?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Must our site in Maltman's Hill stop work while the joints are done?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Where they have broken away, we will tell you before quoting the filling so the filling isn’t wasted.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Why it’s worth doing now in Maltman's Hill
Painting or coating straight over joints rarely lasts. The joints have to be filled or sealed as joints before or alongside any coating work. Around Maltman's Hill, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we will quote for the lot.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why appoint us
- Commercial sealant work since 2005
- Old sealant cut out, never sealed over
- 12-month guarantee on workmanship
- Fixed quotes based on photos, drawings or a visit
See our cost guide or how we’re accredited.
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Smaller jobs around Maltman's Hill can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- We vacuum each run and prime it if the chosen product requires a primer.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Related advice
Places near Maltman's Hill
What else we do in Maltman's Hill
What affects the price in Maltman's Hill
Your fixed quote is built from the real scope. It takes account of:
- The total length or number of joints
- Site requirements such as inductions and permits
- Specialist products, such as fire-rated or hygienic sealants
- Joint width, depth and condition
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
We can often quote from photographs and a few details. It helps to include:
- The postcode of the building
- When you need the work done
- How the joints are reached, and at what height
- Any specification or named product
To get a fixed quote, call the office on 01277 525 020 or email drawings and photos. You can also send details through our quote form.
Commercial clients in Maltman's Hill
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.