The Mastic Doctor team standing beside their branded vans outside an office building
Medway · England

Floor Joint Sealing in Lower Bush

Floor joint sealing for Lower Bush, from a contractor working since 2005. Fully insured and CHAS accredited.

  • Drivers complaining about joints on a route
  • Flexible sealant torn out by wheels
  • Failing joints at loading bays and dock doors
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
Constructionline member
Fully insured: £5m PL

Floor joint sealing near Lower Bush

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Floor joint sealing around Lower Bush: points for this area

The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in. Lower Bush is about 24 miles from central London. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.

Campuses like University for the Creative Arts - Rochester, 3.3 miles to the east of Lower Bush, mix old and new buildings, with movement joints wherever they meet. In a school such as Cuxton Community Infant School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Sites like French Hospital, 3 miles to the east of Lower Bush, carry ambulances, deliveries and visitors’ cars over their road and deck joints.

Lower Bush is about 3 miles west of Rochester, in Medway. Any commercial site in Lower Bush is covered. 54 places across Medway fall within our area, including Lower Bush. We also cover London, around 24 miles from Lower Bush.

If you need floor joint sealing in ME2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Lower Bush, we cover Upper Bush (1 mile south-west), Cuxton (1 mile east), North Halling (1 mile south-east), Halling (2 miles south) and Cobham (2 miles north-west). A short drive away, we cover Gillingham (6 miles east), Chatham (4 miles east), Rochester (3 miles east), Rainham (7 miles east), Luton (4 miles east) and Park Wood (7 miles east).

Near you in Lower Bush

Locally, jobs take us to sites close to Rede Common and Strood Academy. For rail, the closest station is Cuxton station, about 1.1 miles east of the centre. Nearby you’ll also find Pentagon Shopping Centre (3.8 miles east) and Six Poor Travellers House (3 miles east). For a walk, there’s Ranscombe Farm and Gad's Hill.

Map of Lower Bush © OpenStreetMap contributors

How we handle floor joint sealing in Lower Bush

It isn’t only heavy industry. Shops, showrooms and trade counters have joints that take trolleys, foot traffic and scrubber-driers, and an open, grimy joint line looks poor as well as catching wheels. A flush, well-finished joint tidies the whole floor. The enquiries we see most involve scruffy, dirty joint lines on a shop or showroom floor and drivers complaining about joints on a route, on joints along racking aisles, construction joints and retail and showroom floors. Whoever orders the work in Lower Bush, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

For a site near Lower Bush, measurements and photos up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.

We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Lower Bush (ME2)
Wider area
Medway
Guarantee
A 12-month guarantee
Quotes
Quoted before any work starts
Telephone
01277 525 020
Page updated
3 November 2026

Why deal with it now?

Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first while the rest of the floor carries on. One visit to deal with every failing joint makes more sense than several trips to a place like Lower Bush. Photos of every joint help us quote for the whole job.

Pricing floor joints depends on how many there are, their condition and the access. Ask us for a fixed quote.

Why appoint us

  • Sealing commercial buildings since 2005
  • Joints cleaned back to sound surfaces
  • Health and safety: CHAS accredited
  • 12 months’ guarantee on every job

See our cost guide or how we’re accredited.

Honest limits

Being straight saves everyone time. Fresh joints won’t solve:

  • Slab panels that rock or move under load
  • Damaged or worn floor coatings and screeds
  • Joint edges that have already broken away, which need repairing before filling (we will tell you if so)

If in doubt, call the office on 01277 525 020 or send photos by email and we’ll say what we think before you book.

Joints and surfaces we work on

  • Loading bays
  • Retail and showroom floors
  • Joints along racking aisles
  • Saw-cut induced joints
  • Forklift and pallet-truck routes
  • Construction joints

General trades versus a specialist

The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

How a job runs

Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes anything from a day for one loading bay to several days for a large floor, split into phases, and our waste is bagged and taken away as we go. For a building around Lower Bush, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.

  1. We walk the floor and mark up joint widths, edge damage and traffic routes.
  2. You receive a fixed quote showing products and phasing.
  3. Each joint is cut or routed back to clean, sound concrete.
  4. Dust is vacuumed out and primer applied where specified.
  5. Filler or sealant is placed to depth and finished flush.
  6. Zones reopen once cured and the work moves on.

Before we start on site

  • Warn occupants and staff about the work
  • Tell us what induction or permit system the site runs
  • Arrange parking or a loading space

Request a quote

Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call 01277 525 020 or send details through our quote form.

Get a price

Advice

Lower Bush: questions and answers

Does your area include sites such as Strood Retail Park, near Lower Bush?

Yes. We cover Lower Bush and the area around it, including industrial estates, business parks and retail parks such as Strood Retail Park. To start, just give us a call on 01277 525 020 or email us with the unit, the joints involved and your access times.

Would you work within a site like French Hospital?

Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

Does the weather affect the work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Which sealant will you use?

Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.

Is Lower Bush in your area?

Yes. We cover Lower Bush and the rest of Medway. To discuss a job, speak to us on 01277 525 020 or email a schedule or drawings.

Will you just go over the old sealant?

No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.

Do you have public liability insurance?

Yes. We are fully insured, and the certificate can go with your quote.

Surface by surface

Loading bays and dock areas

Joints at dock doors need a product that copes with the traffic and the conditions. Phasing is planned around your delivery schedule.

Retail and showroom floors

Retail joints see trolleys, footfall and scrubber-driers. The product is chosen for that traffic and the appearance is part of the brief.

Work for main contractors and building owners

Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules.

Accreditations

Trusted. Accredited. Insured.