Herne Hill floor joint sealing
Floor joint sealing for Herne Hill, from a contractor working since 2005. Fully insured and CHAS accredited.
- Joint edges breaking up under truck wheels
- Cracked and crumbling joint fill
- Untidy open joints in a retail unit
Floor joint sealing for Herne Hill sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Floor joint sealing in Herne Hill, done properly
Across Herne Hill and the rest of Greater London, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. A rough length of joint, photos of the worst areas and a site plan let us give a quick quote, or we can arrange a site visit. If you are dealing with a rough ride across broken joints and broken arrises where pallet trucks cross, we can put it right, on saw-cut induced joints, forklift and pallet-truck routes and loading bays alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Herne Hill it comes down to the same thing: the right product in a properly prepared joint.
Around Herne Hill, as across London, joints are under constant load, from basement car parks and loading bays to podium decks and busy mall floors. When a joint fails, grit and water get in and the arrises start to break up, so it pays to act early.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Place
- Herne Hill (SE22, SW2, SE24)
- Wider area
- Greater London
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. All of Greater London is in the ULEZ, and kerbside space in Herne Hill can be scarce. If there’s a loading bay, a car park or a permit we can use, tell us when you send details.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- Let us know about inductions and permits
- Agree which areas must stay open
- Send any specification or drawings in advance
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, give us a call on 01277 525 020 or send details through our quote form.
Read more
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Places near Herne Hill
More services for Herne Hill
Questions we’re asked in Herne Hill
Will you take on work at estates like Bessemer Park Industrial Estate, close to Herne Hill?
Yes. Our area takes in Herne Hill and its surroundings, with estates and business parks such as Bessemer Park Industrial Estate included. To start, just speak to us on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Is a hospital such as King's College Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
How do we get a quote for floor joints?
A rough joint length, a few photographs and a site plan let us give a quick quote. For larger floors, a site visit is often best so speak to us on 01277 525 020 or email drawings and photos to set one up.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Do you use semi-rigid filler or flexible sealant on floor joints?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is usually right, and movement joints or perimeters need something flexible. You’ll see the choice for each area in the quote.
Why it’s worth doing now in Herne Hill
Some runs only need partial renewal or topping up. If old material is sound on one face and only a fine gap has opened, it may not all have to come out and the quote shows which approach suits each run. In a London building, a failed joint rarely affects only one party: water travels through shared structures, and a small leak becomes a dispute between occupiers. Dealing with it early is simpler for everyone.
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
Why us?
- Specification-led, product-correct work
- Work carried out by CSCS-carded applicators
- Public liability insurance in place
- Failed material removed, not covered up
Read how commercial sealant jobs are priced or how we’re accredited.
Traffic, movement and joints around Herne Hill
In London, decks, bays and service yards usually have to keep running, so we seal in sections and hand areas back as each cures. Less than 3 miles from Herne Hill there are at least three named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
At places like Stone Trading Estate, which lies north-west of Herne Hill, joints are sealed a section at a time so operations carry on. Sites like King's College Hospital (1 mile north of Herne Hill) carry ambulances, deliveries and visitors’ cars over their road and deck joints. If you manage units on an estate such as Bessemer Park Industrial Estate (0.5 miles north-west of Herne Hill), the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Herne Hill is about 3 miles south of London, in Greater London. Our applicators travel to Herne Hill for work on floor joints, handled exactly as we handle every other area. Herne Hill is one of 764 places in Greater London on our list.
Postcode districts covered here: SE22, SW2 and SE24. For a building on Jelf Road, Dewey Lane and Talma Road or nearby, we can quote for floor joints. Herne Hill sits on or close to the A204 and A2214, which helps when planning parking and deliveries for the job. We also cover Dulwich Village (1 mile south-east), East Dulwich (1 mile north-east), Dulwich (1 mile south-east), Denmark Hill (1 mile north) and Camberwell (1 mile north). Nearby towns on our patch include London (3 miles north), City of Westminster (5 miles north-west), Marylebone (5 miles north-west), Kensington (6 miles north-west), St Pancras (5 miles north) and Shoreditch (5 miles north).
Landmarks near Herne Hill
Locally, jobs take us to sites close to The Charter School, Half Moon pub and Belair Park. There’s a railway station in Herne Hill itself: North Dulwich station. Other landmarks nearby include Surrey Quays Shopping Centre (3.5 miles north-east) and House of Dreams Museum (0.7 miles north-east). Open spaces near Herne Hill include Battersea Park Lake and Knight's Hill.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Clear packed debris from open joints regularly
- Keep trucks off new joints until we say they’re ready
- Plan for a top-up on newer floors
- Record damaged joints with a photo and a location
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder so early treatment saves a lot of trouble.
How the quote is worked out
We price every job individually. The things that drive the figure:
- Whether old sealant has to be cut out first
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
- Access and working height
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- What the building is and how it’s used
- Anything awkward about access or site hours
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email us.