The Mastic Doctor team standing beside their branded vans outside an office building
Greater London · England

Industrial and floor joint sealing in Hampton, Greater London

Floor joint sealing in Hampton, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.

  • A rough ride across broken joints
  • Loading bay joints breaking down
  • Joint fill separating from the concrete
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Floor joint sealing for businesses in Hampton

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

About our floor joint sealing in Hampton

Open joints take a beating from forklift and pallet-truck wheels. Each crossing knocks the unsupported edge until a crisp saw cut becomes a wide, broken groove. Filling the joint properly gives the edges back their support. It also smooths the route for drivers and stock. If you have open saw cuts full of debris and joint fill separating from the concrete, we can put it right. A specialist sealant contractor works differently from a general builder: on jobs in Hampton, preparation and product choice get the time they need.

Floor and movement joints in London take heavy use: car park decks, loading bays, shopping centre malls and podiums over occupied space. When a joint fails, grit and water get in and the arrises start to break up.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Hampton (TW12, TW11)
Wider area
Greater London
Guarantee
A 12-month guarantee
Price
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026

Leave it or put it right?

Some runs only need partial renewal or topping up. If old material is sound on one face and only a fine gap has opened, it may not all have to come out and the quote shows which approach suits each run. Access in London is hard enough to arrange once, so it makes sense to deal with every failing joint while access is in place.

Pricing floor joints depends on quantities, condition and access. Call for a quote.

Why appoint us

  • Our applicators hold CSCS cards
  • 12-month guarantee on workmanship
  • One contact handling all your sites
  • Products installed to the manufacturer’s instructions

See how commercial sealant jobs are priced or our accreditations and insurance.

How the job changes by surface

Retail and showroom floors

In retail, joints take trolleys, castors and cleaning machines rather than forklifts. The product is chosen for that traffic and the finish matters as much as the performance.

Flexible floor sealants

Where joints move more, a flexible polyurethane floor sealant is often used. They give less edge support than semi-rigid fillers, so they suit lighter traffic or movement joints.

Our process

Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For a job in Hampton, access comes first. Send the building rules and access times with your enquiry.

  1. A floor survey records every joint, its edges and what crosses it.
  2. The treatment and the zones are set out in a fixed quote.
  3. Each joint is cut or routed back to clean, sound concrete.
  4. We extract the dust and prime the faces if the product needs it.
  5. The joint is filled to its specified depth and trimmed level.
  6. Zones reopen once cured and the work moves on.

Preparing the site

  • For older buildings, check the asbestos register before work
  • Arrange parking or a loading space
  • Point out any areas we must not close

Quotes

Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, call 01277 525 020 or email us.

Ask for a quote

Related advice

Hampton: questions and answers

Do you take on jobs in Hampton where loading and access are tightly controlled?

Yes, we plan every London job around the building’s own access rules. Send the building rules and access times with your enquiry. The ULEZ covers the whole of Greater London, which we allow for

Does your area include sites such as Kingsway Business Park, near Hampton?

Yes, sites like Kingsway Business Park are within our area, along with the rest of Hampton. To start, just speak to us on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.

How soon can traffic go back on the floor?

Cure times vary with the product and how cold the slab is. We’ll give you a time for each zone when we agree the phasing.

Can you fill joints where the arrises have spalled?

Filling against broken edges doesn’t last. We’ll tell you if the joint edges need repairing first, so you can decide how to proceed.

How do you choose the sealant?

The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.

Do you hold CHAS accreditation?

Yes. Mastic Doctor is CHAS accredited and a Constructionline member.

Do you seal on top of existing sealant?

No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.

For managing agents and facilities managers

Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.

How the quote is worked out

To price the job, we consider:

  • Which sealant the job calls for
  • Distance, for remote addresses
  • Site requirements such as inductions and permits
  • How much there is to seal

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.

Before you send an enquiry

For an accurate fixed quote, we need to understand the site. Useful things to include:

  • What the building is and how it’s used
  • How the joints are reached, and at what height
  • The postcode of the building
  • Any dates the work must fit around

Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.

Where floor joints take the most wear near Hampton

Basement car parks and service yards in London tend to be in use all working day, which is why we work a few bays at a time. Hampton has at least three named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment.

Across sites such as Longford Industrial Estate (0.6 miles east of Hampton), floor and movement joints can be sealed in phases so units keep working. For buildings at a park such as Kingsway Business Park (0.5 miles south of Hampton), brick and panel movement joints are easy to forget until one leaks. Campuses like St Mary's University (2 miles north-east of Hampton) mix old and new buildings, with movement joints wherever they meet.

Hampton is about 2 miles south-west of Twickenham, in Greater London. Hampton sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Greater London, 764 places are covered, including Hampton. For work in that direction, see our London page, about 13 miles away.

Commercial sites across TW12 and TW11 are covered for floor joints. For a building on Station Road, High Street and Old Farm Road or nearby, send details and we’ll quote for floor joints. You will find Hampton on or near the A3008, so getting applicators and materials to site is simple. If your building is just outside Hampton, we cover Hanworth (1 mile north-west), Hampton Hill (1 mile east), West Molesey (1 mile south), Fulwell (1 mile north-east) and East Molesey (2 miles south-east). Bigger towns within reach include London (13 miles north-east), City of Westminster (11 miles north-east), Marylebone (12 miles north-east), Kensington (9 miles north-east), St Pancras (13 miles north-east) and Shoreditch (15 miles north-east).

What’s near Hampton

Locally, jobs take us to sites close to Jolly Coopers pub, Lady Eleanor Holles School and Carlisle Park. The nearest railway station is Hampton station, about 0.5 miles south of the centre. Nearby you’ll also find Treaty Centre (3.1 miles north) and Teddington Memorial Hospital (1.5 miles east). For a walk, there’s Oak Avenue Local Nature Reserve and Richmond Hill.

Map of Hampton © OpenStreetMap contributors

When something else is needed

Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:

  • A failing floor coating, which is a flooring contractor’s job
  • Unstable slabs moving under traffic
  • Uneven floors that need grinding or levelling

Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we will tell you honestly.

Joints and surfaces we work on

  • Retail and showroom floors
  • Forklift and pallet-truck routes
  • Construction joints
  • Joints along racking aisles
  • Saw-cut induced joints
  • Loading bays
Accreditations

Trusted. Accredited. Insured.