
Floor Joint Sealing in Great Chart
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Great Chart. Send photographs or drawings for a fixed quote.
- Old filler gone hard, cracked or loose
- Joint edges breaking up under truck wheels
- Failing joints at loading bays and dock doors
Floor joint sealing for businesses in Great Chart
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Surface by surface
Flexible floor sealants
Flexible floor sealants come in several colours so ask if the colour matters.
Isolation joints at walls and columns
Joints at walls and columns are often missed when floors are sealed, and they collect dust and debris. We record them with the rest of the floor joints.
Floor joint sealing in Great Chart, done properly
Most industrial slabs are divided into panels with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. We work on loading bays, construction joints and retail and showroom floors, and the failures we are asked to look at most are unfilled floor joints collecting dirt and grit and chipped and spalling edges along forklift routes. A single leaking joint is often how a building in Great Chart first comes to us: we look at the rest while we are there and tell you what we find.
Smaller community and commercial buildings around Great Chart have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.

- Place
- Great Chart (TN23)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Is Great Chart too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you work at a site such as St. Georges Business Centre, by Great Chart?
Yes. Estates, retail parks and business parks around Great Chart, St. Georges Business Centre among them, are all within reach. To start, just give us a call on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Should floor joints be filled or sealed?
It depends on the traffic and the movement. Trafficked joints on truck routes usually need a semi-rigid filler to support the edges and joints with more movement take a flexible sealant.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Spalled arrises, which need an edge repair first
- A floor that rocks at the joints, which needs a structural fix
- Wide or random cracking that suggests a structural issue
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we will tell you honestly before you book.
Where we work in Great Chart
- Loading bays
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Forklift and pallet-truck routes
- Saw-cut induced joints
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Nearby places to Great Chart
Also in Great Chart
Floor joint sealing in Great Chart: the local picture
Less than 3 miles from Great Chart there are at least three named estates and business parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. At about 47 miles from central London, Great Chart is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds.
Hospitals like William Harvey Hospital, 3.5 miles to the east of Great Chart, have multi-storey or surface car parks whose joints carry vehicles round the clock. Another example is Fairwood Industrial Park (1.1 miles east of Great Chart), where floors and yards would be done in stages around the occupiers. For a centre such as County Square, 1.6 miles east of Great Chart, the service yard and car park joints normally need attention first.
Great Chart is about 1 mile west of Ashford, in Kent. We send applicators to Great Chart for floor joints. Great Chart is one of 931 places we cover in Kent for floor joints. Our London page has more on work in that area.
If you need floor joint sealing in TN23, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on The Street, Toke Close and The Paddocks and the roads nearby. We also cover Godinton (1 mile north-east), Chilmington Green (1 mile south-west), Stanhope (1 mile south-east), Ashford (1 mile east) and Fleeden (1 mile south-west). Bigger towns within reach include Canterbury (14 miles north-east), Sittingbourne (14 miles north), Folkestone (15 miles east), Faversham (12 miles north), Hythe (12 miles south-east) and Davington (12 miles north).
Local landmarks in Great Chart
Recent enquiries here include premises near The Little Black Dog pub, Ashford Community Woodland and John Wallis Academy. The closest station to Great Chart is Ashford International station, about 1.8 miles east of the centre. A little further out are County Square (1.6 miles east) and William Harvey Hospital (3.5 miles east). Green spaces nearby include Orlestone Forest.
Why it’s worth doing now in Great Chart
Open joints are where dirt collects, out of reach of the floor cleaner. In shops, showrooms and clean production areas that matters for hygiene and appearance. Filled joints are far simpler to keep clean. One visit to deal with every failing joint makes more sense than several trips to a place like Great Chart, rather than one at a time. Photos of every joint help us quote for the whole job.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why choose Mastic Doctor in Great Chart
- Workmanship guaranteed for 12 months
- Over 20 years of commercial sealing
- Fully insured
- Constructionline member for supplier checks
Read how commercial sealant jobs are priced or how we’re accredited.
Commercial clients in Great Chart
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Great Chart. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Great Chart can sit alongside others in a wider programme across Kent.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. If others near Great Chart need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Before we start on site
- Explain the parking and delivery arrangements
- Share the asbestos register for older buildings
- Let us know about inductions and permits
Request a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or send photos by email.