Industrial and floor joint sealing in Eton Wick, Windsor and Maidenhead
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Eton Wick and the surrounding area. Send photos or drawings for a fixed quote.
- A gap opening alongside old joint filler
- Drivers complaining about joints on a route
- Grimy joint lines spoiling a showroom floor
Floor joint sealing for Eton Wick sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Eton Wick
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. Most enquiries involve trucks and loads jolting over damaged joints and saw-cut joints left open and packed with grit, on construction joints, forklift and pallet-truck routes and retail and showroom floors. Facilities teams, main contractors and managing agents in Eton Wick tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Eton Wick, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Eton Wick (SL4)
- Wider area
- Windsor and Maidenhead
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Eton Wick: questions and answers
Is Eton Wick too small for you to travel to?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Would you work within a site like King Edward VII Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. We will tell you if the joint edges need repairing first and set out how that affects the job.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship, and we hold public liability insurance.
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building around Eton Wick, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Let building users know which areas are affected
- Share the asbestos register for older buildings
- Share your working hours and any access restrictions
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email the details over.
Advice
Leave it or put it right?
Duct tape or a general builders’ sealant can seem to buy some time. None of it is designed for wheel loads and traffic soon pulls it out. The right filler or sealant saves doing it twice. Converted and older buildings near places like Eton Wick tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor in Eton Wick
- Products installed to the manufacturer’s instructions
- Fully insured
- One phone line for London, the South East and Scotland
- CHAS accredited
Read how commercial sealant jobs are priced and our accreditations.
Floor joint sealing in Eton Wick: the local picture
At about 23 miles from central London, Eton Wick is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day. Eton Wick is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints.
Phasing is what makes joint work possible on busy sites such as Westgate Retail Park (1.4 miles north of Eton Wick): one bay, aisle or car park row at a time. Schools like Eton Wick CofE First School often have long brick elevations with movement joints that age quietly. For an estate such as King Edward VII Hospital, 1.9 miles south-east of Eton Wick, the joints in ramps, decks and long building elevations all need attention over time.
Eton Wick is about 1 mile north of Windsor, in Windsor and Maidenhead. Across the SL4 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 60 places in Windsor and Maidenhead. Reading is covered too, some 15 miles away.
Business premises anywhere in SL4 are within our area. Among the streets we cover are Eton Wick Road, Princes Close and The Wheatbutts, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Boveney (1 mile south-west), Clewer (1 mile south-east), Eton (1 mile east), Windsor (1 mile south) and Dedworth (1 mile south). Bigger towns within reach include Maidenhead (4 miles west), Boyn Hill (5 miles west), Cookham (6 miles north-west), Furze Platt (5 miles north-west), Broomhall (7 miles south) and South Ascot (7 miles south).
Around Eton Wick
Locally, jobs take us to sites close to The Westgate School, Westgate School and Shepherds Hut pub and the streets around them. The nearest railway station is Windsor & Eton Central station, roughly 1.5 miles south-east. Other landmarks nearby include The History On Wheels Museum (less than half a mile north-east) and Windsor Castle (1.7 miles south-east). The countryside around Eton Wick includes Taplow Lake and Bray Pit.
More services for Eton Wick
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Check joint lines on busy aisles regularly
- Keep photographs of joints that look like they’re failing
- Treat loading bay joints first if they’re failing
- Hold traffic back until the product has cured
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
While the concrete edges are intact, it’s a filling job. Once they have broken away, edge repair comes first, with more downtime and more disruption.
Commercial clients in Eton Wick
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Eton Wick can sit alongside others in a wider programme.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Cracks across panels caused by settlement or overload
- Spalled arrises, which need an edge repair first
- Uneven floors that need grinding or levelling
If you are not sure, just ring 01277 525 020 or email the details over and we will give you a straight answer before you book.
Surfaces we seal
- Loading bays
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Saw-cut induced joints
- Retail and showroom floors
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.