Ellisfield floor joint sealing
Floor joint sealing for Ellisfield, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Joint edges breaking up under truck wheels
- Flexible sealant torn out by wheels
- Filler that has parted from one face
Need floor joint sealing in Ellisfield?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Looking after the joints
Regular inspection catches problems early. Specifically:
- Plan for a top-up on newer floors
- Record damaged joints with a photo and a location
- Treat loading bay joints first if they’re failing
- Walk the main routes and inspect joint lines on a regular cycle
If a joint we filled starts to break up within 12 months, tell us and we’ll arrange a look. After that, a check before your busiest period keeps small repairs small.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
Floor joint sealing in Ellisfield, done properly
Few warehouses can shut a whole floor while joints are done, so the work is split into zones and treated one area at a time. Tell us your site hours and access windows and we’ll plan around them so the rest of the operation keeps going. We work on retail and showroom floors, loading bays and saw-cut induced joints, and what we’re called in for most is drivers complaining about joints on a route and joint fill separating from the concrete. Facilities teams, main contractors and managing agents in Ellisfield tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Halls, schools and small commercial buildings near places like Ellisfield have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Ellisfield (RG25)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Ellisfield
What else we do in Ellisfield
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. Rural sites near Ellisfield may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First, the zones and order of work are agreed with you.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Before we start on site
- Point out any areas we must not close
- Warn occupants and staff about the work
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, call the office on 01277 525 020 or email us.
Related advice
Traffic, movement and joints around Ellisfield
The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in. Ellisfield has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Parks like Viables Business Park (2.6 miles north of Ellisfield) combine paved areas, car parks and building elevations, each with joints that move. For an estate such as Basingstoke and North Hampshire Hospital, which lies north of Ellisfield, the joints in ramps, decks and long building elevations all need attention over time.
Ellisfield is about 4 miles south of Basingstoke, in Hampshire. We cover commercial sites throughout Ellisfield, for single jobs and planned programmes alike. 723 places across Hampshire fall within our area, including Ellisfield. Sites around Reading have their own page, about 17 miles away.
Business premises anywhere in RG25 are within our area for floor joints. Buildings on Church Lane, Furzen Lane and College Lane are within our area. We also cover Upper Common (1 mile south-west), Nashes Green (2 miles east), Cliddesden (2 miles north), Viables (3 miles north) and Upton Grey (4 miles east) for floor joints. Further afield, our area takes in Basingstoke (4 miles north), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles east) and Alton (6 miles south-east).
Around Ellisfield
We work on buildings around The Fox pub. Ellisfield’s nearest station is Basingstoke station, roughly 4.2 miles north of the centre. A little further out are Basingstoke and North Hampshire Hospital (5.1 miles north) and Basing House (4.4 miles north). For a walk, there’s The Mill Field and Farleigh Hill.
Common questions from Ellisfield clients
Do you take on work at healthcare sites like Basingstoke and North Hampshire Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Ellisfield too far out for you?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Which is better for warehouse joints, filler or sealant?
The answer comes from the traffic and the joint’s movement. Forklift routes generally call for a semi-rigid filler that holds the arrises and joints with more movement take a flexible sealant.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
What guarantee do you give on joint filling?
Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Why it’s worth doing now in Ellisfield
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels and traffic soon pulls it out. A product chosen for the traffic and movement does the job once. One visit to deal with every failing joint makes more sense than several trips to a place like Ellisfield. Photos of every joint help us quote for the whole job.
Pricing floor joints depends on quantities, condition and access, plus any specification you are working to. Call for a quote.
What you get with us
- 12-month guarantee on workmanship
- Our applicators hold CSCS cards
- Constructionline member
- Over 20 years of commercial sealing
For managing agents and facilities managers
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Ellisfield can sit alongside others in a wider programme.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
What the job involves on each surface
Flexible floor sealants
Flexible floor sealants come in several colours, and we will confirm what the specified product offers.
Construction joints
Day joints sit where one section of slab was cast against another. They often see more movement than sawn joints and that shapes the choice of filler or sealant.
Common problems we fix in Ellisfield
Older fills harden, shrink and crack with age especially under daily scrubbing and traffic. Once it has gone hard or come loose, it protects nothing.
Site and facilities staff are often the first to spot these:
- Drivers complaining about joints on a route
- Failing joints at loading bays and dock doors
- Filler that has parted from one face
- Scruffy, dirty joint lines on a shop or showroom floor
At places like Viables Industrial Estate, 2.7 miles to the north of Ellisfield, joints are sealed a section at a time so operations carry on.
Comparing quotes
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Are they CHAS accredited or on Constructionline?
- Whether old or failed sealant will be cut out, not overlaid
- How they handle RAMS and site documents