Corhampton floor joint sealing
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Corhampton and the surrounding area. Send details for a fixed quote.
- Drivers complaining about joints on a route
- Soft sealant dragged out of trafficked joints
- Brittle joint filler breaking up
Need floor joint sealing in Corhampton?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- A floor that rocks at the joints, which needs a structural fix
- A floor that is out of level for the racking or trucks
- Damaged or worn floor coatings and screeds
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
- Loading bays
- Retail and showroom floors
How we handle floor joint sealing in Corhampton
We diagnose the floor first rather than guessing at a product: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. If you have broken arrises where pallet trucks cross and saw-cut joints left open and packed with grit, we can put it right, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Corhampton it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site near Corhampton, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
Our workmanship is guaranteed for 12 months, in Corhampton as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Corhampton (SO32)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Slabs, ramps and loading bays in Corhampton
At about 57 miles from central London, Corhampton is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day. Corhampton is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, while winter salting gets into any joint left open.
Schools such as Meonstoke Church of England Infant School have movement joints in their walls and floors that are easy to overlook.
Corhampton is about 7 miles north-west of Horndean, in Hampshire. Corhampton sits inside our coverage and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. Corhampton is one of 723 places in Hampshire on our list. Sites around Southampton have their own page, roughly 12 miles from Corhampton.
We cover the SO32 postcode districts for floor joints. Among the streets we cover are De Port Heights, Warnford Road and Millside. If your building is just outside Corhampton, we cover Exton (1 mile north), Meonstoke (1 mile south), Brockbridge (1 mile south), Droxford (1 mile south) and Soberton (2 miles south). A short drive away, we cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (9 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
Around Corhampton
Locally, jobs take us to sites close to The Shoe Inn. The countryside around Corhampton includes Beacon Hill and St Clair's Meadow.
Questions about Corhampton
What site paperwork comes with a job in Corhampton?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Is Corhampton off your patch?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
What do you need from us to quote?
Send details through our quote form or by email and tell us what runs on the floor. A fixed quote follows with the product and phasing set out.
Is it normal for joint filler to separate?
Separation normally comes from slab shrinkage, poor preparation or the wrong product. We look at which it is before recommending anything.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Do you need floor joint sealing in Corhampton?
Oil, laitance, dust and old cleaning chemicals build up inside joints. If the faces aren’t taken back to clean concrete first, the new material simply lifts out.
If one of these sounds familiar, it’s time for a closer look:
- Unfilled floor joints collecting dirt and grit
- Brittle joint filler breaking up
- Scruffy, dirty joint lines on a shop or showroom floor
- Soft sealant dragged out of trafficked joints
Around Corhampton, each joint gets a filler or sealant matched to what crosses it and how much it moves.
What to look for in a quote
- What site paperwork they can supply
- What the guarantee covers, and for how long
- Their approach to joint depth and backing
- Is the sealant right for the movement and the substrate?
Site staff or a sealant specialist?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Owners, agents and contractors
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Nearby places to Corhampton
What else we do in Corhampton
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Rural sites near Corhampton may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Make sure the joints can be reached
- Agree which areas must stay open
- Confirm the product named in the specification
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or send photos by email.
Read more
How the quote is worked out
We price every job individually. The things that drive the figure:
- Access and working height
- Distance, for remote addresses
- The size and state of each joint
- The total length or number of joints
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- How the joints are reached, and at what height
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
- Whether an asbestos survey exists
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.