Facade Sealing contractors in Corhampton
Facade sealing for Corhampton, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Weathered joints at frame-to-structure perimeters
- Failed sealant on precast panel joints
- Sealant pulling away from frames or panels
Facade sealing for Corhampton sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Common questions from Corhampton clients
Is Corhampton too small for you to travel to?
No. Places such as Corhampton are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Which documents can you supply for work in Corhampton?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Do we need an asbestos check before resealing?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register, so ask for it before we start. Suspect material is left alone until it has been tested.
Do you run new sealant over the existing bead?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the faces are cleaned before resealing. That is what makes the new joint last.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a quote and we will price it properly.
Do you provide access for facade work?
That comes down to the access arranged for the job. When you call the office on 01277 525 020 or email drawings and photos, describe the access.
Facade sealing in Corhampton
External sealing depends on the weather more than most trades. Joints have to be dry and the air and surface temperature within the product’s range, so frosty or damp mornings can hold work back. We plan for that and keep you updated. We work on coping and flashing joints, cladding panel joints and shopfront frames, and the failures we’re asked to look at most are air leaks through failed facade joints and perimeter sealant that has split or peeled away. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Corhampton it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site near Corhampton, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photos and the programme and we’ll quote to suit.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Where
- Corhampton (SO32)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Movement beyond what any sealant can handle
- Replacing glass or failed glazing units
- Cracked or spalling substrates that need repair before sealing
If in doubt, speak to us on 01277 525 020 or email us and we’ll say what we think before you book.
What we seal
- Shopfront frames
- Coping and flashing joints
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Stone and brick facade joints
Nearby places to Corhampton
More services for Corhampton
Facade sealing in Corhampton: the local picture
The South East is one of the drier parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so the external programme keeps a little slack. Corhampton is about 57 miles from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes.
Projects at schools like Meonstoke Church of England Infant School work to term dates, so mastic is programmed tightly. Historic houses such as Hinton Ampner House, 4.4 miles north of Corhampton, are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Corhampton is about 7 miles north-west of Horndean, in Hampshire. Any commercial site in Corhampton is covered, whether it’s a single job or part of a planned programme. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. For work in that direction, see our Southampton page (12 miles or so).
Work on facade joints is covered throughout SO32. Streets here include De Port Heights, Warnford Road and Millside. If your building is just outside Corhampton, we cover Exton (1 mile north), Meonstoke (1 mile south), Brockbridge (1 mile south), Droxford (1 mile south) and Soberton (2 miles south). A short drive away, we cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (9 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
Around Corhampton
Recent enquiries here include premises near The Shoe Inn. Green spaces nearby include Beacon Hill and St Clair's Meadow.
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
How the quote is worked out
The price varies from site to site. Expect it to depend on:
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
- The total length or number of joints
- Site requirements such as inductions and permits
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
A good diagnosis starts with the right details. Tell us:
- Drawings or a marked-up plan, if available
- When you need the work done
- Clear photos of the problem areas
- The postcode of the building
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Jobs in and around smaller places like Corhampton are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Have the specification and drawings to hand
- Warn occupants and staff about the work
- Agree which areas must stay open
Quotes
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Surface by surface
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification with a product suited to glazing perimeters.
Cladding panel joints
On sealed panel systems, every joint keeps water out. We cut out failed joints along their full length and rebuild them to the correct depth.
Keeping the joints sound
For the best life from the joints:
- Report water ingress at frames as soon as it shows
- Confirm the survey covers external sealants in older buildings
- Brief window cleaners about newly sealed joints
- Check that rainwater leaves the facade the way it was designed to
Following storms, look inside for damp or staining near frames. Catching a new leak early keeps the repair small.
Coordinate facade sealing with other external works. One set-up for several trades saves money and cuts time on site.