Industrial and floor joint sealing in Cliffe, Medway
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Cliffe. Send photos or drawings for a fixed quote.
- Filler that has parted from one face
- Broken arrises where pallet trucks cross
- A rough ride across broken joints
Need floor joint sealing in Cliffe?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing for commercial buildings in Cliffe
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. If you are dealing with unfilled floor joints collecting dirt and grit and soft sealant dragged out of trafficked joints, we can help, on loading bays, joints along racking aisles and forklift and pallet-truck routes alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Cliffe, preparation and product choice get the time they need.
Halls, schools and small commercial buildings near places like Cliffe have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
A 12-month guarantee applies to all our work. If an installation problem shows up, phone 01277 525 020 or email the details over and we will arrange a return visit.
- Location
- Cliffe (ME3)
- Wider area
- Medway
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Signs you need floor joint sealing in Cliffe
A slab keeps shrinking for a long time after it is cast, and the saw cuts are there so it cracks in straight, controlled lines. As the panels contract, the joints widen so a filler put in early may separate along one side.
Look out for the following:
- Unfilled floor joints collecting dirt and grit
- Untidy open joints in a retail unit
- Cracked and crumbling joint fill
- Sealant pulled out along a truck route
Schools such as St Helen's Church of England Primary School have movement joints in their walls and floors that are easy to overlook.
What your quote should include
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
- How the joint faces will be prepared and primed
- Are they CHAS accredited or on Constructionline?
Nearby places to Cliffe
More services for Cliffe
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Level or flatness problems across the floor
- Worn screed or surface finishes
- Broken concrete either side of the joint
If you’re not sure, just ring 01277 525 020 or email us and we will give you a straight answer before you book.
Where we work in Cliffe
- Joints along racking aisles
- Retail and showroom floors
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Loading bays
- Construction joints
What the job involves on each surface
Construction joints
Day joints on busy routes are prone to edge damage. Movement and traffic are both checked before we decide what goes in.
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. A flexible product suits them better than a stiff filler.
Building owners, agents and FMs in Cliffe
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Cliffe: questions and answers
Is a smaller place like Cliffe outside your area?
Not at all. Cliffe is within our area. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Do you take on work at healthcare sites like French Hospital?
Yes. Healthcare sites are among the places we work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Does the weather affect the work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Do you use semi-rigid filler or flexible sealant on floor joints?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is normally right and perimeter or movement joints need flexibility. You’ll see the choice for each area in the quote.
What happens if the joint edges are damaged?
We check the edges as part of the survey. Where they have broken away, we will tell you before quoting the filling so the filling isn’t wasted.
Will we need to close the floor?
Normally only the zone we’re working in has to close. Each zone reopens when the product can take traffic and the next zone follows.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Smaller jobs around Cliffe can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Getting the site ready
- Tell us which areas need to stay in use
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or send photos by email.
Related advice
Floor joint sealing around Cliffe: points for this area
With the shore within about 2 miles, Cliffe counts as a coastal location. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. At about 26 miles from central London, Cliffe is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day.
For an estate such as French Hospital, which lies south of Cliffe, the joints in ramps, decks and long building elevations all need attention over time. For an occupier at a site such as Nuralite Industrial Estate, 2.6 miles south-west of Cliffe, the joints at loading doors and dock levellers usually see the hardest wear.
Cliffe is about 5 miles north of Rochester, in Medway. Anywhere in ME3, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Cliffe is one of 54 places we cover in Medway for floor joints. There’s a separate page for London, about 26 miles away.
Commercial sites across ME3 are covered. For a building on Station Road, St Helens Road and Chesterton Road or nearby, we can quote for floor joints. Just outside Cliffe, we also work in Cliffe Woods (2 miles south), Church Street (2 miles south-west), Mockbeggar (3 miles south), Lower Higham (3 miles south-west) and Higham (4 miles south-west). Further afield, our area takes in Gillingham (7 miles south-east), Chatham (7 miles south), Rochester (5 miles south), Rainham (8 miles south-east), Strood (5 miles south) and Luton (6 miles south).
Landmarks near Cliffe
Locally, jobs take us to sites close to The Evening Star pub. The nearest railway station is Higham station, roughly 2.6 miles south-west. A little further out are French Hospital (4.9 miles south) and Upnor Castle (3.8 miles south). Not far away are Gad's Hill and Thurrock Thameside Nature Park.