Industrial and floor joint sealing in Broughton, Oxfordshire
Commercial sealant work in Broughton for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Untidy open joints in a retail unit
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
Need floor joint sealing in Broughton?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Why it’s worth doing now in Broughton
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled which means more downtime in that zone. Older rural buildings around Broughton move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Our applicators hold CSCS cards
- Work to your specification and the manufacturer’s guidance
- Sealing commercial buildings since 2005
- One contact handling all your sites
About our floor joint sealing in Broughton
We diagnose the floor first rather than guessing at a product: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. The enquiries we see most involve joint fill separating from the concrete and loading bay joints breaking down, across forklift and pallet-truck routes, joints along racking aisles and loading bays. For commercial sealant work in Broughton, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around smaller places such as Broughton, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Broughton (OX15)
- Region
- Oxfordshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Broughton
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Slabs, ramps and loading bays in Broughton
At about 67 miles from central London, Broughton is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. The 3 miles around Broughton take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Parks like Vantage Business Park (to the south-east of Broughton) combine paved areas, car parks and building elevations, each with joints that move. Large sites such as The Horton General Hospital, 2.2 miles to the east of Broughton, have car parks, service roads and long elevations with movement joints in brick and panels. At a retail site such as Castle Quay Shopping Centre (2.6 miles north-east of Broughton), trolleys, cages and cars run over floor and slab joints all day.
Broughton is about 2 miles south-west of Banbury, in Oxfordshire. Anywhere in OX15, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 423 places across Oxfordshire fall within our area, Broughton among them. We also cover Oxford, some 21 miles away.
Commercial sites across OX15 are covered for floor joints. Buildings on Danvers Close, Danvers Road and Wykham Lane are within our area. Just outside Broughton, we also work in North Newington (1 mile north), Neithrop (2 miles north-east), Ruscote (2 miles north-east), Bloxham (2 miles south) and Drayton (2 miles north). Bigger towns within reach include Bicester (14 miles south-east), Bure Park (13 miles south-east), Chipping Norton (10 miles south-west), Grimsbury (3 miles north-east), Woodstock (14 miles south) and Bodicote (3 miles east).
Landmarks near Broughton
Locally, jobs take us to sites close to The Roebuck Public House, The Warriner School and Tudor Hall School. For rail, the closest station is Banbury station, roughly 2.7 miles north-east of the centre. Nearby you will also find Bloxham Village Museum (1.8 miles south) and Castle Quay Shopping Centre (2.6 miles north-east). Open spaces near Broughton include Crouch Hill and Woodford Bottom and Lamb's Pool.
Different surfaces, different methods
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. A filled joint lets wheels roll across and saves the edges.
Semi-rigid joint fillers
A semi-rigid filler is stiff enough to hold the arrises up when wheels cross. They allow only small movement so timing matters on newer slabs.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Rural sites near Broughton may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
What we need from you
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Let building users know which areas are affected
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or use the quote form.
Related advice
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- How much there is to seal
- Joint width, depth and condition
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Clear photos of the problem areas
- Any specification or named product
- Whether an asbestos survey exists
- Anything awkward about access or site hours
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call 01277 525 020 or send details through our quote form.
FAQs: Broughton
Can you work at a site such as Vantage Business Park, by Broughton?
Yes, sites like Vantage Business Park are within our area, along with the rest of Broughton. To start, just give us a call on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Is hospital work, at somewhere like The Horton General Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Why is there a gap next to the joint filler?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. It is typically dealt with by topping up.
What do you need from us to quote?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan let us give a quick quote. For larger floors, a site visit is often best so phone 01277 525 020 or use the quote form to set one up.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Also in Broughton
Aftercare for building managers
To get the most from the new sealant:
- Tell us about strong cleaning chemicals before we quote
- Keep photographs of joints that look like they’re failing
- Plan for a top-up on newer floors
- Keep grit out of unfilled joints in the meantime
Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so we choose something that tolerates them.
Every vehicle on a busy aisle hits a damaged joint. Early treatment protects wheels, loads and drivers as much as the floor.