Industrial and floor joint sealing in Broughton, Hampshire
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Broughton. Send details for a fixed quote.
- Dock area joints that have failed first
- A gap opening alongside old joint filler
- Cracked and crumbling joint fill
Floor joint sealing for Broughton sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Level or flatness problems across the floor
- Cracks across panels caused by settlement or overload
- Slab panels that rock or move under load
If in doubt, call the office on 01277 525 020 or use the quote form and we’ll say what we think before you book.
Surfaces we seal
- Joints along racking aisles
- Saw-cut induced joints
- Loading bays
- Construction joints
- Forklift and pallet-truck routes
- Retail and showroom floors
Floor joint sealing in Broughton
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. We work on saw-cut induced joints, forklift and pallet-truck routes and loading bays, and what we are called in for most is old filler gone hard, cracked or loose and joint fill separating from the concrete. Whether you call it commercial sealant work, mastic application or joint sealing, in Broughton it comes down to the same thing: the right product in a properly prepared joint.
Smaller community and commercial buildings around Broughton have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Broughton (SO20)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Our process
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. For a building around Broughton, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Getting the site ready
- Tell us what induction or permit system the site runs
- Share the asbestos register for older buildings
- Let building users know which areas are affected
Ask for a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email drawings and photos.
Related advice
How the job changes by surface
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. Wheel type and traffic level steer the product choice.
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Cost factors for floor joints
What shapes the price:
- Access and working height
- Working within restricted access windows
- The site’s rules and procedures
- Backing rod, priming and other preparation
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Drawings or a marked-up plan, if available
- The type of building and who uses it
- The product your specification calls for
- The postcode of the building
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email us.
Common questions from Broughton clients
Is Broughton off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
What documents will you need to give us for a job in Broughton?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front so the filling isn’t wasted.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can weather delay the job?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Can you phase floor joint work around operations?
Typically only the zone we’re working in has to close. Each zone reopens when the product can take traffic and the next zone follows.
Nearby places to Broughton
Other services in Broughton
When to call us in Broughton
Oil, laitance, dust and old cleaning chemicals build up inside joints. If the faces aren’t taken back to clean concrete first, the new material simply lifts out.
If one of these sounds familiar, it’s time for a closer look:
- Joint edges breaking up under truck wheels
- Scruffy, dirty joint lines on a shop or showroom floor
- Trucks and loads jolting over damaged joints
- Filler that has parted from one face
For a school such as Broughton Primary School, playground and building joints can be done in the holidays.
What to look for in a quote
- Which product they’ll use, and why it suits the joint
- Will failed sealant be removed rather than covered?
- Proof of insurance
- Their pre-qualification and accreditations
Floor joint sealing around Broughton: what changes locally
Broughton sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and where de-icing salt is spread in winter, open joints let it in. At about 69 miles from central London, Broughton is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
Around Broughton, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Broughton is about 8 miles north-west of Romsey, in Hampshire. Broughton sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Our Hampshire coverage takes in 723 places. Sites around Southampton have their own page, about 14 miles away.
We cover the SO20 postcode districts. We cover commercial and managed buildings on High Street, Greyhound Mews and Plough Gardens and the roads nearby. Nearby places we also cover include Houghton (2 miles east), Horsebridge (3 miles south-east), Mottisfont (4 miles south), Stonymarsh (4 miles south-east) and Lockerley (4 miles south). Bigger towns within reach include Winchester (11 miles east), Eastleigh (13 miles south-east), Andover (9 miles north-east), Totton (12 miles south), Chandler's Ford (11 miles south-east) and Romsey (8 miles south-east).
Local landmarks in Broughton
Recent enquiries here include premises near The Tally Ho Public House and the streets around them. The nearest railway station is Mottisfont & Dunbridge station, about 4.3 miles south of the centre.
Leave it or put it right?
Open joints are where dirt collects where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. Older rural buildings around Broughton move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Broughton
- One number for every site we cover
- Work to your specification and the manufacturer’s guidance
- Old sealant cut out, never sealed over
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced and our accreditations.